ppt presentation loop

How-To Geek

How to loop a powerpoint presentation.

Your changes have been saved

Email is sent

Email has already been sent

Please verify your email address.

You’ve reached your account maximum for followed topics.

Quick Links

Set up your slideshow to be looped, apply automatic slide transitions.

Slideshows are sometimes used to display images at events, such as weddings or trade shows. Whatever the occasion might be, you’ll want to loop your PowerPoint presentation so your guests aren’t staring at a blank screen. Here’s how it’s done.

First, open your PowerPoint presentation in which you would like to loop. Once open, navigate to the “Set Up” group of the “Slide Show” tab and then select the “Set Up Slide Show” button.

The “Set Up Show” window will appear. In the “Show options” group, check the box next to “Loop Continuously until Esc.” Once selected, click “OK” in the bottom-right corner of the window.

Now, when you play your slideshow, it will end only when you press the “Esc” key instead of when you've finished the last slide.

Related: How to Make YouTube Videos Loop Continuously

One caveat: With the way we currently have it set up, the slideshow will proceed only when someone clicks the mouse button. That’s fine if there will be a speaker present at all times. Otherwise, you’ll need to set up automatic slide transitions.

Head back to the “Set Up Show” window by selecting “Set Up Slide Show” in the “Set Up” group of the “Slide Show” tab.

There are a couple of options you need to select, but one important note is that you must first select “Using Timings, If Present” under the “Advance Slides” group.

The next option we select will lock a few things in place (which is why you need to select “Using Timings, If Present” first).

Under the “Show Type” group, select “Browsed at a Kiosk (Full Screen)." The “Loop Continuously until Esc” option will be enabled automatically if you haven’t already turned it on, and the option you’ve selected under “Advance Slides” will remain unchanged.

Select “OK” when ready to proceed.

Without the “Browsed at a Kiosk” option enabled, the automatic slide progressions would be disabled if someone were to press the Back key. With it enabled, the Forward and Back keys are locked, allowing the slideshow to automatically progress unattended without fear of someone breaking it.

Now it’s time to set the timings of the slides. Head over to the “Transitions” tab. In the “Timing” group, check the box next to “After” and set the timing at which you’d like each slide to progress. Note that it doesn’t matter if the box next to “On Mouse Click” is checked or not---it won’t work.

After that, select the “Apply to All” option in the same group.

Now, when you play your slideshow, it will continuously loop without interruption. To exit the slideshow, press the “Esc” button.

• Microsoft Office

How to Loop a PowerPoint Slide Show to Repeat Automatically

Set up a PowerPoint Presentation That Loops or Repeats Continuously

by Avantix Learning Team | Updated November 12, 2021

Applies to: Microsoft ®  PowerPoint ®  2013, 2016, 2019 and 365 (Windows)

You can set up a PowerPoint slide show to loop or repeat automatically. A looping presentation can be used at events, trade shows or even in a reception area in an office. The easiest way to set up a slide show to loop or replay continuously is to apply automatic transitions and then configure Slide Show settings.

Recommended article: 5 PowerPoint Keyboard Shortcuts to Run a Slide Show

Do you want to learn more about PowerPoint? Check out our virtual classroom or in-person PowerPoint courses >

Screenshots in this article are from PowerPoint 365 but are similar in older versions of PowerPoint.

Step 1: Apply transitions to automatically advance slides during a slide show

Transitions occur between slides when you run a slide show.

To apply transitions to automatically advance slides during a slide show:

• In Normal View or Slide Sorter View, display or select a slide.
• Click the Transitions tab in the Ribbon.
• Select a transition in the Transitions gallery (such as Fade).
• Click Effect Options and choose the desired option. Effect Options change depending on the transition you selected.
• In the Timing group, click the arrows beside Duration to set the timing you want (in seconds) for the transition. You may also type a duration.
• In the Timing group, under Advance Slides, deselect or uncheck On mouse click and beside After, select or click the up and down arrows to set the timing to transition to the next slide. You may also type a duration.
• In the Timing group, click Apply to All.

In the Transitions tab in PowerPoint, you can select the type of transition (such as Fade) as well as timing options:

Step 2: Set up a presentation to loop during a slide show

To set up a PowerPoint presentation to loop during a slide show:

• Click the Slide Show tab in the Ribbon and then click Set Up Slide Show. A dialog box appears.
• Under Show type, if you select Presented by a speaker (full screen), the speaker or those watching the slide show will have control over when they advance slides. This is the default setting for slide shows. If you select Browsed by an individual (window), those watching the slide show do NOT have control over when slides advance. If you select Browsed at kiosk (full screen), those watching the slide show do NOT have control over when slides advance and the presentation automatically loops until those watching press Escape (Esc).
• Under Show options, select Loop continuously until 'Esc'. You will be able to select this option if you selected one of the first two options under Show type.

Below is the Set Up Show dialog box with Presented by speaker selected and looping enabled:

If you want to set specific timings for slides to advance or to add narration, check out the article How to Run a PowerPoint Slide Show Automatically (Set Up a Self-Running Presentation) . If you have audio or video in the presentation, you'll need to set the media to play automatically (on the Playback tab in the Ribbon) and animations will also need to be set to run automatically.

Subscribe to get more articles like this one

Did you find this article helpful? If you would like to receive new articles, JOIN our email list.

More resources

How to Embed a YouTube Video in PowerPoint

How to Hide and Unhide Slides in PowerPoint (with Shortcuts)

How to Insert Video in PowerPoint (from a File on Your PC or a Shared Drive)

PowerPoint Keyboard Shortcuts to Play and Control Video During a Slide Show

How to Add Animation in PowerPoint (Animate Images, Text and Other Objects)

Related courses

Microsoft PowerPoint: Intermediate / Advanced

Microsoft PowerPoint: Design for Non-Designers

Microsoft PowerPoint: Animations Bootcamp

Microsoft Excel: Intermediate / Advanced

VIEW MORE COURSES >

Our instructor-led courses are delivered in virtual classroom format or at our downtown Toronto location at 18 King Street East, Suite 1400, Toronto, Ontario, Canada (some in-person classroom courses may also be delivered at an alternate downtown Toronto location). Contact us at [email protected] if you'd like to arrange custom instructor-led virtual classroom or onsite training on a date that's convenient for you.

Copyright 2024 Avantix ® Learning

You may also like

How to Insert or Type E with an Accent Mark in PowerPoint (È, É, Ê, Ë, è, é, ê, or ë)

You can insert or type e with an accent mark in PowerPoint using built-in tools or keyboard shortcuts (including Alt code shortcuts). The letter e can be inserted with an accent in both upper or lower case in text boxes or placeholders on slides, the slide master or layouts. The following are common accents in upper or lower case – È, É, Ê, Ë, è, é, ê, or ë.

How to Fade a Picture or Part of a Picture in PowerPoint (Using a Gradient)

You can fade a picture in PowerPoint by drawing a rectangle shape on top of the picture and then filling the rectangle with a gradient from opaque to transparent. This technique is often used to fade an image into the background of a slide. Since the rectangle is placed on top of the image and then text may be placed on top of the rectangle, you may need to reorder the objects.

How to Lock an Image, Shape or Other Object in PowerPoint

You can now lock an image, shape or other object in PowerPoint. Objects can be locked in Normal View or Slide Master View. Only PowerPoint 365 users can lock objects to prevent moving and resizing. This is helpful if you want to select and move other objects on the slide or prevent others from moving or resizing an object. You can lock items using the context menu or the Selection Pane.

Microsoft, the Microsoft logo, Microsoft Office and related Microsoft applications and logos are registered trademarks of Microsoft Corporation in Canada, US and other countries. All other trademarks are the property of the registered owners.

Avantix Learning |18 King Street East, Suite 1400, Toronto, Ontario, Canada M5C 1C4 | Contact us at [email protected]

Our Courses

Avantix Learning courses are offered online in virtual classroom format or as in-person classroom training. Our hands-on, instructor-led courses are available both as public scheduled courses or on demand as a custom training solution.

All Avantix Learning courses include a comprehensive course manual including tips, tricks and shortcuts as well as sample and exercise files.

VIEW COURSES  >

Contact us at  [email protected]  for more information about any of our courses or to arrange custom training.

Privacy Overview

Pin it on pinterest.

• Print Friendly

• Start the presentation and see your notes in Presenter view Article
• Add speaker notes to your slides Article
• Rehearse and time the delivery of a presentation Article
• Record a slide show with narration and slide timings Article
• Print your PowerPoint slides, handouts, or notes Article
• Create a self-running presentation Article

Create a self-running presentation

You can use a self-running presentation to run unattended in a booth or kiosk at a trade show or convention, or you can save it as a video and send it to a client.

On the Slide Show tab, select  Set Up Slide Show .

Under Show type , pick one of the following:

Presented by a speaker (full screen)  Allows the people watching your slide show to have control over when they advance the slides.

Browsed by an individual (window)  Presents your slide show in a window, where control over advancing the slides is not available to the people watching.

Browsed at a kiosk (full screen)  Loops your slide show until the person watching presses Esc.

Rehearse and record slide timings

When you choose the following show types: Presented by a speaker (full screen) or  Browsed at a kiosk (full screen) , you’ll want to rehearse and record timings for effects and slides.

On the Slide Show tab, select  Rehearse Timings .

Note:  The presentation timer begins immediately when you click Rehearse Timings .

The Rehearsal toolbar appears and the Slide Time box begins timing the presentation.

Figure: The Rehearsal toolbar

While timing your presentation, you can do one or more of the following on the Rehearsal toolbar:

To move to the next slide, click Next .

To temporarily stop recording the time, click Pause .

To restart recording the time after pausing, click Pause .

To set an exact length of time for a slide to appear, type the length of time in the Slide Time box.

To restart recording the time for the current slide, click Repeat .

After you set the time for the last slide, a message box displays the total time for the presentation and prompts you to do one of the following:

To keep the recorded slide timings, click Yes .

To discard the recorded slide timings, click No .

Slide Sorter view appears and displays the time of each slide in your presentation.

Add narration or sound

To record a narration, your computer requires a sound card and a microphone, and a microphone connector if the microphone is not a part of your computer.

On the Slide Show tab, in the Set Up group, click the arrow on the Record Slide Show button.

Select one of the following:

Start Recording from Beginning

Start Recording from Current Slide

In the Record Slide Show dialog box, select the Narrations and laser pointer check box, and if appropriate, select or deselect the Slide and animation timings check box.

Click Start Recording .

To pause the narration, in the Recording shortcut menu in Slide Show view, click Pause . And to resume your narration, click Resume Recording .

To end your slide show recording, right-click the slide, and then click End Show .

The recorded slide show timings are automatically saved and the slide show appears in Slide Sorter view with timings beneath each slide.

You can record a narration before you run a presentation, or you can record it during the presentation and include audience comments. If you do not want narration throughout your entire presentation, you can record separate sounds or comments on selected slides or objects. For more details, see Record a slide show with narration and slide timings .

Browsed by an individual (window)  Presents your slide show in a window, where control over advancing the slides is available to the people watching.

Browsed at a kiosk (full screen)  Loops your slide show until the person watching presses Esc. (Selecting this option automatically selects the Loop continuously until 'Esc'  check box and causes your slide show to run in a loop.)

A  Rehearsal toolbar appears, and the Slide Time box begins timing the presentation. The toolbar includes a timer, a pause/play button, and Repeat button

To restart recording the time after pausing, click Play .

On the view tab, you can then switch to Slide Sorter view to see the time allotted for each slide in your presentation.

Set up slide transitions

If you want a slide show to run automatically at a kiosk, you can control when and how the slides advance. To do this, you can apply the same transition to all slides in the presentation and set the transition to automatically advance after a certain time interval.

On the Transitions tab, click the transition that you want.

Do the following on the Transitions tab:

To set the amount of time that each slide is displayed, select After and enter the number of seconds you want.

To set the duration of each transition between slides, enter the amount of time in the Duration box.

Click Apply to All .

Export a presentation to video

You can export a presentation as a movie file. See Save a presentation as a movie file for more details.

Need more help?

Want more options.

Explore subscription benefits, browse training courses, learn how to secure your device, and more.

Microsoft 365 subscription benefits

Microsoft 365 training

Microsoft security

Accessibility center

Communities help you ask and answer questions, give feedback, and hear from experts with rich knowledge.

Ask the Microsoft Community

Microsoft Tech Community

Windows Insiders

Microsoft 365 Insiders

Was this information helpful?

Thank you for your feedback.

How to loop a PowerPoint slideshow so that it automatically starts over as soon as it ends

• To loop a PowerPoint slideshow, you'll need to enable looping in the "Set Up Slide Show" menu.
• Once you set your PowerPoint to loop, it'll start over from the beginning automatically after playing the last slide.
• Visit Business Insider's Tech Reference library for more stories .

If you've designed a Microsoft PowerPoint presentation that's meant to be viewed repeatedly, such as on a kiosk or in a museum installation, you can adjust the settings in PowerPoint so that your slideshow "loops" instead of ending after one viewing.

Getting a PowerPoint to loop is easy. Read on to find out how, using PowerPoint for both Mac and PC.

Check out the products mentioned in this article:

Microsoft office (from $149.99 at best buy), apple macbook pro (from $1,299.00 at apple), acer chromebook 15 (from $179.99 at walmart), how to loop a powerpoint presentation.

1. Open the Microsoft PowerPoint presentation that you want to loop.

2. With your PowerPoint presentation open, click on the "Slide Show" tab, then click on "Set Up Slide Show." 

3. In the pop-up window that appears, click on the box next to "Loop continuously until 'Esc'" so that a small checkmark appears inside the box. Feel free to adjust any other settings in this menu as well. Click "OK" when you're finished.

4. To test whether your PowerPoint can loop successfully, click on the "From Beginning" or "Play From Start" button in the Slide Show tab. Click through the slideshow until you reach the end. When your PowerPoint reaches its final slide, it should start over from the beginning automatically. When you're confident that looping is enabled, and you're ready to close the slide show, press the Esc key.

Related coverage from  Tech Reference :

How to add a border to slides in powerpoint, and give your slideshow a sleek design, how to embed a youtube video into your microsoft powerpoint presentations using a mac or pc, how to convert google slides to a powerpoint presentation in 4 easy steps, how to create a custom powerpoint template to use or share with others, how to copy or duplicate a powerpoint slide and put it anywhere in your slideshow.

Insider Inc. receives a commission when you buy through our links.

Watch: We compared the $1,200 MacBook Air with the $500 Surface Go, and the results were a mess

• Main content

How to Loop a Powerpoint Presentation: Step-by-Step Guide

Looping a PowerPoint presentation is an easy way to keep your slides on repeat for an audience or a display. It’s perfect for trade shows, informational kiosks, and even personal use when you don’t want to manually control the presentation. In just a few clicks, you can automate your PowerPoint to loop continuously until you decide to stop it.

Step by Step Tutorial on How to Loop a PowerPoint Presentation

Before we dive into the nitty-gritty of looping your presentation, let’s understand what we’re about to do. By following these steps, we’ll set your PowerPoint to play over and over without any manual intervention. It’s like putting your favorite song on repeat, but with slides!

Step 1: Open your PowerPoint presentation

Open the PowerPoint presentation you want to loop.

When you open your presentation, make sure you’re on the slideshow tab. This is where all the magic happens for presentation playback.

Step 2: Select ‘Set Up Slide Show’

Click on the ‘Slide Show’ tab and then select ‘Set Up Slide Show’.

This is where you can tweak the settings for how your presentation is displayed. It’s like the control center for your slideshow.

Step 3: Choose ‘Loop continuously until ‘Esc”

In the ‘Set Up Show’ options, check the box for ‘Loop continuously until ‘Esc”.

By checking this option, you’re telling PowerPoint to keep cycling through your slides until you press the Escape key to stop it.

Step 4: Set the slides to advance automatically

Under ‘Advance slides’, select ‘Using timings, if present’ or set the ‘After’ option to the number of seconds you want each slide to be displayed.

This step is crucial if you want your presentation to move through slides without you clicking anything. It’s like setting an automatic timer for each slide.

Step 5: Save your settings and test the presentation

Click ‘Ok’ to save your settings and start your presentation to test the loop.

After you’ve saved your settings, give your looped presentation a dry run to make sure everything flows smoothly. If it does, you’re all set!

After completing these steps, your PowerPoint presentation will loop continuously. Whether you’re away from your computer or engaged with an audience, your presentation will keep running in the background, providing a seamless flow of information.

Tips for Looping a PowerPoint Presentation

• Make sure your slides are self-explanatory since you might not be there to explain each one.
• Keep an eye on the timings if your slides have animations or transitions.
• Use high-quality images and readable text to ensure your presentation looks good on repeat.
• Consider adding background music to keep the loop engaging.
• Always do a full run-through to check for any glitches that might disrupt the loop.

Frequently Asked Questions

How do i loop a powerpoint presentation with sound.

To loop a PowerPoint presentation with sound, embed the audio file in your presentation and set it to play across slides. Then, follow the steps above to loop the presentation itself.

Can I loop a PowerPoint presentation on a TV or monitor?

Yes, you can loop a PowerPoint presentation on a TV or monitor by connecting your computer and setting up the presentation to loop as instructed above.

Is it possible to loop only specific slides in a presentation?

To loop specific slides, you can create a custom slide show within PowerPoint that includes only the slides you want to loop, and then set that custom show to loop.

Can I loop a PowerPoint presentation on a loop without using PowerPoint?

To loop a presentation without PowerPoint, you can convert it to a video format that supports looping, such as MP4, and use a media player to loop it.

How can I stop a looped PowerPoint presentation?

To stop a looped PowerPoint presentation, simply press the ‘Esc’ key on your keyboard, and it will return to normal view.

• Open your PowerPoint presentation.
• Select ‘Set Up Slide Show’.
• Choose ‘Loop continuously until ‘Esc”.
• Set the slides to advance automatically.
• Save your settings and test the presentation.

Looping a PowerPoint presentation can be incredibly useful in various situations, from professional trade shows to casual photo slideshows. With the simple steps outlined above, anyone can set up their presentation to run on a continuous loop, freeing up time and ensuring the information is always on display. Remember to check your timings, especially if you have animations or transitions, and test your loop thoroughly to avoid any hiccups. Now, you’re ready to create smooth, endlessly looping presentations that can captivate and inform your audience without a hitch. Keep experimenting with PowerPoint’s features to make your presentations even more powerful, and always look for ways to improve and streamline your work. Happy presenting!

Matt Jacobs has been working as an IT consultant for small businesses since receiving his Master’s degree in 2003. While he still does some consulting work, his primary focus now is on creating technology support content for SupportYourTech.com.

His work can be found on many websites and focuses on topics such as Microsoft Office, Apple devices, Android devices, Photoshop, and more.

Share this:

• Click to share on Twitter (Opens in new window)
• Click to share on Facebook (Opens in new window)

Related Posts

• How to Loop a Slideshow on Powerpoint 2013: Step-by-Step Guide
• How to Loop a Powerpoint Office 365 Slideshow
• How to Download a Google Slides Presentation as a Powerpoint File
• How to Rotate a Powerpoint Slide Presentation
• How to Do a Powerpoint Google Slides Presentation Conversion
• How to End Powerpoint on Last Slide in Powerpoint 2010: A Step-by-Step Guide
• How to Make Google Slides Vertical (5 Quick Steps)
• How to Delete a Slide in Powerpoint 2010: Step-by-Step Guide
• How to Hide a Slide in Powerpoint 2010: A Step-by-Step Guide
• How to Insert Slides from Another Presentation: Powerpoint 2024 Guide
• How to Add a New Slide in Google Slides: A Step-by-Step Guide
• How to Delete Multiple Slides in Google Slides: A Step-by-Step Guide
• How to Make a Powerpoint Slide Vertical in Powerpoint 2013: A Step-by-Step Guide
• How to Convert Powerpoint to Google Slides: A Tech Solution
• How to Duplicate a Slide in Powerpoint: A Step-by-Step Guide
• How to Merge Files in Powerpoint: A Step-by-Step Guide
• How to Remove Slide Numbers in Powerpoint 2019: Easy Steps
• How to Add a Hyperlink on Google Slides
• How to Change Slide Size in Powerpoint 2016
• Determining the Size of a PowerPoint Slide in Pixels: A Guide

Get Our Free Newsletter

How-to guides and tech deals

You may opt out at any time. Read our Privacy Policy

How to Loop a PowerPoint Presentation

Just like an animated GIF or video clip, you can loop a slideshow in Microsoft PowerPoint. This is ideal if you set the presentation to automatically play because it starts at the beginning each time it ends to create an infinite loop.

Here’s how to loop a PowerPoint presentation on Windows and Mac. Currently, PowerPoint on the web doesn’t offer a Loop feature.

Set the Timing to Advance the Slides

Before you set your PowerPoint presentation to loop, you may want to adjust the timing to advance through the slides. You can use the same time for each slide or display particular slides for a longer amount of time.

• Open your presentation in PowerPoint on Windows or Mac and go to the Transitions tab.
• In the Timing section of the ribbon, check the box for After and enter the time in seconds to the right. You can also use the arrows to move the time up or down in small increments.

• To set different times for slides, select the next slide and use the above step to choose the After timing. Continue this process for the remaining slides.
• To set the same timing for all slides in the presentation, select Apply To All in the Timing section.

• If you only want continuous play to advance the slides, you can uncheck the box directly above for On Mouse Click . However, if you want the ability to advance the slides with a mouse click and after a certain amount of time, you can leave the box checked.

Once you have the timings set to advance the slides, you can turn on the Loop setting.

• Go to the Slide Show tab and select Set Up Slide Show in the Set Up section.

• Under Show type , choose an option to play your presentation.
• If you plan to present the slideshow or have an individual view the show, choose one of the first two options. Then, check the box for Loop continuously until ‘Esc’ in the section beneath.

Confirm that the Using timings, if present setting is marked under Advance Slides.

• If you want the slideshow to play automatically , choose the third option, Browsed at a kiosk . You’ll then see the Loop continuously until ‘Esc’ and Using timings, if present settings are automatically marked and disabled for changing.

• Adjust any other options per your preference and use the OK button to save the settings.

When you’re ready to begin the slideshow and let it play, check out our how-to for starting the PowerPoint presentation as well as navigating it if needed.

Just Let It Play

By looping a PowerPoint presentation, you don’t have to lift a finger to advance through the slides. You can display it at a kiosk, in a waiting room, or at a convention booth and just let it play over and over.

For more, look at how to add narration for an engaging PowerPoint presentation .

Sandy Writtenhouse is a freelance technology writer and former Project, Department, and Program Manager. She turned her education, job experience, and love of technology into a full-time writing career. With all sorts of gadgets in her home and her hands, she seeks to help others make life easier through technology. Read Sandy's Full Bio

Read More Posts:

Home Blog PowerPoint Tutorials How to Loop a PowerPoint

How to Loop a PowerPoint

When a PowerPoint slideshow ends, the screen turns blank after the last slide. However, you can opt to restart the presentation from the first slide by running the slide deck in loop. You might want to loop a slide if you have created a PowerPoint slideshow that needs to run on a screen in loop, such as a self-running slideshow for a kiosk, a PowerPoint template indicating a break at an event, or when you need to go back to one or more of the previous slides from the start for a quick review of the presentation.

How to Make PowerPoint Loop

To loop PowerPoint, go to Slide Show -> Setup Show .

From the dialog box that appears, select Loop continuously until ‘Esc’ to enable looping your slides. By default, all slides are looped in a sequence.

How to Loop PowerPoint from Selected Slides

To loop specific slides, go to Slide Show -> Setup Show , enable loop, and select the slides to run in a loop via Show Slides .

How to Loop PowerPoint Slides Manually and Automatically

You might want to create a slideshow from break or countdown-themed PowerPoint templates or Google Slides templates to indicate a break during an event.

You can select the time each slide remains on screen via the Transitions tab. The Timings menu provides the option to select the duration for each slide and whether you intend the slides to move automatically or on mouse-click.

To loop PowerPoint slides manually or automatically, go to Slide Show -> Setup Show , enable the loop option, and go to Advance slides . Select Manually for moving slides on mouse click, arrow keys, or PowerPoint remote. Alternatively, select Use timings .

Final Words

Whether you need to loop a PowerPoint presentation manually or automatically for an event or to create a self-running slideshow that loops PPT, you can use the instructions mentioned above to customize the settings for your slide deck according to need.

Like this article? Please share

Microsoft PowerPoint, PowerPoint Tools Filed under PowerPoint Tutorials

Related Articles

Filed under PowerPoint Tutorials • July 30th, 2024

How to Add a Timer to PowerPoint

Generate expectations for your presentation introductions by mastering how to add a timer to PowerPoint. Step-by-step instructions + templates.

Filed under PowerPoint Tutorials • July 24th, 2024

How to Find Quick Access Toolbar in PowerPoint

Easily customize PowerPoint’s UI by locating and editing the Quick Access Toolbar in PowerPoint

How to Translate in PowerPoint

Unlock the experience of PowerPoint translation! Learn methods, tools, and expert tips for smooth Spanish conversions. Make your presentations global.

Leave a Reply

How to Play PowerPoint Slides Automatically

The PowerPoint autoplay feature is an amazing tool for creating slideshows that advance automatically . Self-running PowerPoint presentations are great for leaving in kiosks or publicity booths. You can even show them with recordings or voiceovers to make sure your audience gets the most out of it. 

Forget worrying about clicking from slide to slide, today we will teach you how to play PowerPoint slides automatically!

We’ll cover the following topics:

Why should you use the automatic slideshow PowerPoint feature?

• How to Play PowerPoint Slides Automatically without Clicking - Option 1
• How to play slideshow in PowerPoint automatically - Option 2

How to make PowerPoint slides advance automatically with audio 

• How to loop slides in PowerPoint
• Check out some experts’ best practices for Automatic slideshows in PowerPoint

How to automatically play PowerPoint presentations across devices

How to play powerpoint slides automatically without clicking on mac, elevate your presentation with professional designs: try 24slides today.

Using the automatic slideshow feature has many benefits . The main one is its practicality; it is a tool you can set up in advance so that you eliminate the need for ongoing attention and your presentation flow is better. 

And that’s not all, you can even add voiceovers, recordings, and even laser pointer gestures to make sure your audience gets the most out of your presentation.

It becomes particularly beneficial in the following scenarios:

• Business presentations: An automatically progressing presentation can help you focus on your content without worrying about going slide by slide, which can often be distracting and disrupt your rhythm.
• Publicity: Self-running presentations can be great if you use them for publicity. For example, if you have a kiosk or booth, a self-running PowerPoint slideshow can help you reach more people without them having to speak one-on-one with a salesperson. 
• E-Learning: In e-learning modules or training presentations, autoplay can help learners progress through the material while listening to your lecture. However, they can also pause and rewind to go to the specific section they wish to revisit.
• Photo or Video Slideshows: Autoplay is commonly used in photo or video slideshows for events such as weddings or birthdays. It can serve as a background loop, or you can present it at a special moment along with music or narration to enhance the experience.

How to Play PowerPoint Slides Automatically without Clicking: Option 1

There are a couple of different ways to make your slides run automatically, and we'll go over both options. This first option is for when you need a really customized presentation: personalized timing for each slide, voiceovers, or laser pointer gestures . 

If this is your case, go ahead with this section, but if you’d like something a bit simpler, proceed to Option 2.

• The first step is to go to the Slide Show Tab. On the Set Up group, you’ll find the Set Up Slide Show option to start customizing your self-running presentation.

• Once the Set Up Show Window opens, deselect the Presented by a speaker option, as it refers to manually advancing your slides, either by clicking or using keys. Next, consider several options for the automatic slideshow:

• Browsed by an individual is one choice for creating a self-running PowerPoint presentation. This option permits you to deliver your slides within a window, as opposed to the typical full-screen mode. Ensure that the Use timings, if present option is enabled for this feature to function correctly.
• Another option is the Browsed at a kiosk , which allows you to run a full-screen, continuous slideshow automatically. This option locks in both the looping and timing settings, ensuring that your slideshow will continue until you press the ESC key.

If you’re not sure what option is the best for you, remember you can always select manually the loop and timings option . Try different options with these and try out how your presentation will look like with the different settings.

• The next step is to set your timings. This means defining how much time you want your PowerPoint slideshow to spend on each slide before automatically advancing to the next one.

To set your timings, click on Rehearse Timings , which will allow you to go through your presentation slide by slide, and it’ll record how much time you spend on each one. 

After you finish going through all your slides, a message will pop up to save your timings. Click yes so you can save the time spent on each slide.

How to play slideshow in PowerPoint automatically: Option 2

Let’s take a look at a different way of using the PowerPoint autoplay feature. This option is great if you’re looking for something simple and just want your slides to advance automatically at regular intervals. 

• First, open the Transitions Tab and locate the Timing Group.

• Go to the After option and manually add how much time you want to spend on each of your slides.

Select the Apply To All option so all your slides have the same timing.

You can also deselect the On Mouse Click option, depending on whether you want to be able to advance your slides by clicking or not.

Adding audio to your automatic PowerPoint is a fantastic feature to enhance your professional image and communicate your content without needing to be present. Let’s take a look at how to do it:

• Go to the Slide Show Tab and select Record Slide Show . Choose Record From Beginning to start with the first slide.

When the fullscreen opens, you will be able to see your first slide along with several options:

• Start in Settings (1) and select the tools you will be using. You have the option to use a microphone, or you can record yourself talking on camera. Choose your microphone and/or camera for recording.
• Next (2) , decide whether you want to have the microphone or camera you selected turned on. You can also choose to have a video preview.
• When you're ready to start recording, go to the top left corner (3) and click Record to start, Stop to pause, and Replay to review how it went.
• Once you finish with a slide, click on the right arrow (4) to move to the next slide.
• If you have Speaker notes in your slides, you can view them in (5) while you record.
• In the Pens and Markers section (6) , you can draw on the screen and make any annotations you want.
• Finally, the Clear option (7) allows you to clear existing recordings on the current slide or on all slides if you are unsatisfied and want to redo your recording.

• Now, to review what you've recorded, go to Set Up and make sure Play Narrations and Use Timings are checked. Then, click on From Beginning to start the presentation.

How to loop slides in PowerPoint 

If you want to learn how to loop your slides in PowerPoint, follow these steps:

• Go to the Slide Show tab and select Set Up Slide Show .

• When the Set Up Show window appears, go to the Show options group and tick the Loop continuously until ‘Esc’ option. Don’t forget to click OK to apply the new setup!

And all done! Now, your presentation will loop until you select ‘Esc’.

Check out some expert best practices for Automatic slideshows in PowerPoint

Now that you've learned how to make a PowerPoint slideshow run automatically, we'll give you the secrets to make your presentation stand out . Let's take a look at some insights from our expert designers .

Avoid too much text

Remember that your time per slide is limited , so it is important not to put too much text since your audience will not have time to read it. Try to express your message in the shortest possible text, and if necessary, revise and rewrite it as many times as necessary to synthesize it.

Limit interactive elements

Limit or avoid interactive elements such as hyperlinks that rely on user interaction since they may not function in PowerPoint autoplay mode.

However, if you want your audience or potential clients to take a specific action, consider using a QR code. Only make sure to leave the slide displayed for enough time for them to use it.

Practice, practice, practice

Keep in mind that your speech needs to fit perfectly with your timings for each slide. So, practicing your presentation multiple times is crucial to ensure a seamless and synchronized delivery. 

First, go to the Slide Show Tab and select Set Up Slide Show .

• When the Set Up Show Window opens, deselect the Presented by a speaker option and consider the following options to set up your automatic slideshow:

• Browsed by an individual : With this option, you can show your slides within a window instead of the typical full-screen mode. Make sure that the Use timings, if present option is selected.
• Another option is the Browsed at a kiosk : This option locks in both the looping and timing settings, ensuring that your slideshow will continue until you press the ESC key.
• Next, you need to set your timings. This involves determining the duration for each slide so that it advances automatically to the next one when you have finished presenting it.

To set your timings, go to the Slide Show Tab and click on Rehearse Timings.

A window will open, allowing you to go through your presentation slide by slide, and it will record how much time you spend on each one . As you progress through each slide, it will confirm the time spent, and you can either agree or choose to re-record.

After you finish going through all your slides, a message will pop up to save your timings . Click yes so you can save the time spent on each slide.

If you’re looking to create a presentation that truly wows your audience, you might want to consider professional design assistance for your PowerPoint. Lucky for you, we’re here to help. Check out the fantastic designs 24Slides can help you create today!

You might also like

• How to Add a Timer to Your Powerpoint Presentations
• 11 Time-Saving PowerPoint Hacks For Creating Quick Presentations
• How To Loop a PowerPoint Presentation
• Add a PowerPoint Real-Time Clock to Your Presentations

Create professional presentations online

Other people also read

Tutorial: Save your PowerPoint as a Video

How To Convert Google Slides To PowerPoint and Vice Versa

How To Add Animations To PowerPoint

How to Make Your Presentations Loop in PowerPoint

Your changes have been saved

Email is sent

Email has already been sent

Please verify your email address.

You’ve reached your account maximum for followed topics.

Microsoft PowerPoint is already a useful productivity tool to deliver slideshows and presentations, but it's even more versatile than you may realize. PowerPoint offers the functionality for your presentations to loop so that the slideshow restarts right after it ends. Read on to find out how to enable this in your project and why such a feature can be immensely useful in a variety of situations.

How to Loop Your Presentations in PowerPoint

As you make your presentation the way you would like for it to be seen, setting your slideshow up to loop is relatively easy. It mainly involves changing a single setting within PowerPoint.

1. Within the Ribbon at the top of the window, click Slide Show . This will take you to a menu of options for displaying and presenting your slide show.

2. Click Set Up Slide Show in the middle Set Up section. This button will open up a pop-up window of detailed, advanced settings for your presentation.

3. In the Set Up Show window, click Loop continuously until 'Esc' in the Show options section.

4. Click OK to apply the change.

5. Preview the presentation using the From Beginning or From Current Slide buttons in the Ribbon to see that the looping works.

As you might notice when you preview the slide show, enabling the setting is only half the battle. While the presentation does return to the first slide after displaying the last one, the slides don't progress on their own. If you want your slides to loop automatically, you'll need to set up transitions between each slide.

How to Automatically Loop Your PowerPoint Slides

1. Select the slide you want to apply the transition to if you haven't already.

2. Click Transitions within the Ribbon. This opens up a variety of options for adding animations when changing from one slide to the next.

3. Choose one of the transitions in the Transition to This Slide section to use with this slide. There are a variety of transition options available, from the subtle to the flashy.

While you can play with each transition to your heart's content, it's not necessarily required; you can stick with the default None option or a simple Fade if you'd like.

4. Navigate to the Timing section on the right-hand side of the Ribbon. In order to automate your loop, you'll need to specify when each slide moves to the next one.

5. Under the Advance Slide heading, click the After: checkbox to enable it.

6. Set a time (in minutes or seconds) by entering one in the text box (currently reading "00:00.00") or the arrow buttons nearby.

7. Repeat this process for the other slides you have. Alternatively, you can click Apply To All to set the current slide's transition settings across every slide in the presentation.

8. When you've applied the transitions you want, you can preview the presentation again using the From Beginning or From Current Slide buttons in the Slide Show tab of the Ribbon.

In the preview, you'll see that the slides now transition automatically, and the loop now works without any further interaction. When you need to leave the presentation, press the Esc (escape) key to return to the normal PowerPoint window.

Why Would You Want to Loop a PowerPoint Presentation?

There are a number of reasons why you'd want to run a PowerPoint presentation in a loop, and thus multiple ways this functionality is useful.

You can create a continuous carousel of photos for gatherings with family and friends or a relaxing slideshow of beaches at the end of a stressful day. You can use it to display important information, like rules or schedules, at conferences or conventions.

The integration with the regular transition timings also allows for specialized use cases where you may need to have certain slides displayed longer than others. For example, it can be used to show menu pricing at a kiosk or on a food truck or to offer some entertainment to people waiting in a long line.

Keep Your PowerPoint Presentation Skills in the Loop

Learning how to loop PowerPoint presentations is just one of the many lesser-noticed features of the widely-used tool that can take your slideshows to a new level.

Functionality like this helps keep PowerPoint a versatile, popular program built for a variety of presenting needs. Now, it's time to put these features to work for you.

• Productivity
• Microsoft PowerPoint
• Microsoft 365

• Shop Now: Amazon Labor Day Tech Sale
• Get These 12 Student Discounts!

Loop a PowerPoint Slide Show

• Brock University

What to Know

• In PowerPoint, go to Slide Show > Set Up Slide Show > Browsed at a Kiosk (Full Screen ) > OK .
• Set the time each slide appears on the screen by selecting Slide Show > Rehearse Timings on the first slide.
• Use Next to move to the next slide and Pause to pause recording, or type a length of time in the Slide Time box.

This article explains how to loop a PowerPoint slideshow in PowerPoint 2019, PowerPoint 2016, PowerPoint 2013, PowerPoint 2010, PowerPoint for Microsoft 365, PowerPoint 2019 for Mac, PowerPoint 2016 for Mac, and PowerPoint for Mac 2011.

How to Create a Self-Running PowerPoint Slideshow

PowerPoint slideshows are not always used by a live presenter. Slideshows set to loop continuously can run unattended in a booth or kiosk. You can even save a slideshow as a video to share.

To create a continuously looping presentation, you need to set it up and record slide timings.

To run the slideshow unattended, set timings for slide transitions and animations to run automatically.

How to Set Up the Presentation

Open the PowerPoint presentation you want to loop continuously.

Go to Slide Show .

Select Set Up Slide Show . The Set Up Show dialog box opens.

Select Browsed at a Kiosk (Full Screen) . This enables the presentation to loop continuously until the viewer presses Esc .

Select OK .

How to Rehearse and Record Timings

To ensure that your automated presentation is the right length, record timings to set the amount of time each slide appears on the screen.

PowerPoint for Mac does not have the rehearsal option. Instead, go to Transitions , choose the transition you want to use, set the duration you want, and select Apply to All .

Go to the first slide of the presentation.

Select Rehearse Timings . The slideshow starts and records the time spent on the slide. The time appears in the Slide Time box on the Recording toolbar.

Select Next on the Recording toolbar when you want to move to the next slide.

Select Pause any time you want to pause or resume recording.

Type a length of time in the Slide Time box if you want to display a slide for a specific amount of time.

Select Repeat if you want to restart the recording time for the current slide only.

Select Close when you're done recording.

You'll be asked if you want to save the new slide timings. Select Yes to save the slide timings at the end of the presentation.

If you have a microphone (built-in or external), record a voiceover on your PowerPoint presentation that plays as the slideshow loops continuously.

Get the Latest Tech News Delivered Every Day

• 9 PowerPoint Presentation Tips for Students
• Control Placement in PowerPoint Slides by Nudging Objects
• Tips for Memorial PowerPoint Presentations
• Slide Layouts in PowerPoint
• Edit Music, Sound, or Other Audio Settings in PowerPoint
• How to Hide and Unhide a Slide in PowerPoint
• Play Sound and PowerPoint Animation at the Same Time
• How to Use Speaker Notes in PowerPoint
• How to Put a GIF in PowerPoint
• The 10 Most Common PowerPoint Terms
• How to Do a Voiceover on PowerPoint
• Copy Slides to Another PowerPoint Presentation
• How to Add Page Numbers in PowerPoint
• How to Add PowerPoint Slides Into a Word Document
• What Is Microsoft PowerPoint?
• Use This PowerPoint Template for a Multiple Choice Quiz

Nice to meet you.

Enter your email to receive our weekly  G2 Tea newsletter  with the hottest marketing news, trends, and expert opinions.

How to Loop a PowerPoint in 5 Simple Steps

May 17, 2024

Public speaking isn’t for everyone.

And if you’re anything like me, the idea of standing up in front of a group of people and presenting a PowerPoint can seem like its own circle of hell.

There are ways to make the nightmare less scary, and that includes putting the PowerPoint on loop, so you can sit back, relax, and let your slides present themselves. If you’re unsure how to loop a PowerPoint, it can be done in just a few steps.

Let’s break it down!

Looping a PowerPoint

There’s a lot you can do in PowerPoint to make it more exciting, like inserting a GIF and embedding a YouTube video . When it comes to looping your PowerPoint, each slide will automatically be shown for a specific amount of time, and when the entire presentation ends, it’ll start from the beginning completely on its own.

How to loop a PowerPoint:

• Click Slide Show from the top menu.
• Click Set Up Slide Show.
• Click Loop continuously.
• Select all slides and click Transitions from the top menu.
• Uncheck “On Mouse Click” and adjust timing.

For more in-depth instructions on how to loop your PowerPoint, including screenshots, keep reading!

1. Click Slide Show

From your PowerPoint presentation, select Slide Show from the top menu.

2. Click Set Up Slide Show

From the Slide Show list of options, click Set Up Slide Show .

3. Click Loop continuously

Under “Show options”, choose Loop continuously until ‘Esc’ , then click OK.

4. Select all slides and click Transitions

Next, select all of your slides from the left-hand menu. Then, click Transitions from the top menu.

5. Uncheck “On Mouse Click” and adjust the timing

Uncheck the box that says “On Mouse Click.” This will allow the slides to move from one to the other without you having to click the mouse.

Then, adjust how long you would like each slide to display before automatically moving onto the next slide. In the below example, each slide will show for two minutes before moving on.

Create an infinite loop

Some things are better on loop, like when your favorite band releases a new song and you can’t wait to memorize the lyrics. Or, a PowerPoint that you’d like to restart completely on its own while you’re busy doing more important things, like listening to that song.

If you frequently use PowerPoint at work, share your thoughts about the popular presentation and leave a review!

Mara Calvello is a Content Marketing Manager at G2. She received her Bachelor of Arts degree from Elmhurst College (now Elmhurst University). Mara works on our G2 Tea newsletter , while also writing content to support categories on artificial intelligence, natural language understanding (NLU), AI code generation, synthetic data , and more. In her spare time, she's out exploring with her rescue dog Zeke or enjoying a good book.

Recommended Articles

Productivity

How to Format a Subscript or Superscript in PowerPoint

You’re here because you need to make a superscript (or subscript) in PowerPoint.

by Maddie Rehayem

The Simple Solution to Creating PowerPoint Borders

Boundaries are healthy, both in relationships and in PowerPoints.

by Grace Pinegar

How to Sign Out of Gmail (On Desktop and iPhone App)

No one likes being snooped on.

by Mara Calvello

Get this exclusive AI content editing guide.

By downloading this guide, you are also subscribing to the weekly G2 Tea newsletter to receive marketing news and trends. You can learn more about G2's privacy policy here .

Unsupported browser

This site was designed for modern browsers and tested with Internet Explorer version 10 and later.

It may not look or work correctly on your browser.

• Presentations

How to Loop a PowerPoint Presentation in 60 Seconds

• Bahasa Indonesia
• العربية/عربي

Have you ever wanted your PowerPoint file to keep on looping and showing the slides over and over? Maybe it's set up on display for visitors and you want to keep it repeating. In today's tutorial, let's learn how to loop a PowerPoint presentation.

We also have a helpful compliment to this tutorial. Download our FREE eBook:  The Complete Guide to Making Great Presentations .  Grab it now before you read on. 

How to Loop Your PowerPoint Presentations (Quickly)

Note : Watch this short tutorial screencast or follow the quick steps below, that compliment this video.

1. Select Your PowerPoint Slides to Loop

You can make PowerPoint run on a continuous loop easily. I'll click on the Transitions tab here on PowerPoint's ribbon and make sure all of my slides are selected here on the left side.

Note : In this tutorial we use the  Simplicity PowerPoint Template . You can find more  great PPT presentation templates  on GraphicRiver  or in our  Ultimate Guide to the Best Microsoft PowerPoint Templates .

2. Set Timing of PowerPoint Presentation Loop

Let's start off by selecting how much time we want each slide to show. Let's tick the After box here and I'll put in 2 seconds , just to test the feature out. Now the slides will advance on their own, each after two seconds. Let's turn on the loop feature now.

3. Set Up the Slide Show Loop in PowerPoint

I'll click the Slide Show tab on the ribbon, and then click Set Up Slide Show. The option that we need to turn on is Loop continuously until 'Esc' . Let's go ahead and press OK to turn that feature on. Let's check to make sure this is all working.

Finishing Up!

I'll click on the first slide in my presentation, and then start the presentation in the lower right corner. After a couple of seconds, it goes to the next slide, then the next slide, and then back to the beginning. So you can see this is working perfectly. The loop feature works great to keep your presentation rolling continuously.

Discover More Great PowerPoint Tutorials

Learn more in our  PowerPoint tutorials  and quick video tutorials on Envato Tuts+. We have an assortment of PowerPoint material to help you make a great presentation: 

Make Great Presentations ( Free PDF eBook Download )

We also have the perfect compliment to this tutorial, which will walk you through the complete presentation process. Learn how to write your presentation, design it like a pro, and prepare it to present powerfully. 

Download our new eBook:  The Complete Guide to Making Great Presentations . It's available for free with a subscription to the Tuts+ Business Newsletter. 

How to Loop a PowerPoint Presentation?

Table of Contents

PowerPoint presentations are a go-to for clear and informative content delivery. But what if you want your presentation to run on repeat, like at a kiosk or digital sign? The good news is, that PowerPoint has a built-in feature to loop your slideshow, ensuring your message stays on display without interruption. 

This blog post will guide you through the simple steps to set your presentation on a loop, keeping your audience engaged and informed around the clock.

What is PowerPoint Looping?

Normally, in a PowerPoint presentation, you have to manually move from one slide to the next by pressing keys on the keyboard or clicking buttons on a mouse or presentation remote.

However, when you enable looping in PowerPoint, the presentation progresses automatically from one slide to the next without requiring manual input. This eliminates the need for the presenter to interact with the computer or mouse during the presentation.

With PowerPoint looping, you can also set each slide to display automatically for a specified duration, determined by you. Once the preset time elapses, the next slide seamlessly appears. Additionally, upon reaching the final slide, the slideshow automatically starts over from the beginning.

Why Do You Need to Loop Your Slideshow in PowerPoint? 

There are several reasons why you might want to loop your slideshow in PowerPoint:

• Unattended Presentations: Looping is ideal for situations where the presentation runs without a presenter. This could be at a kiosk, trade show booth, or in a waiting room. Looping ensures the information is continuously displayed for viewers to come and go as they please.
• Automated Playback: Looping allows for a hands-off presentation experience. Once started, the presentation progresses automatically, freeing you up to greet attendees or answer questions.
• Self-Paced Learning: Looping can be useful for self-paced learning environments. Viewers can revisit slides or take breaks without needing someone to control the flow.
• Continuous Engagement: Looping keeps the audience engaged with a constant stream of information. This can be beneficial for displaying menus, directions, or other ongoing updates.

Create presentation slides with AI in Seconds in Google Slides

10M+ Installs

Works with Google Slides

How to Make a PowerPoint Presentation loop?

Ready to loop your presentation? Here’s how it’s done:

Step 1:  Open your PowerPoint and head over to the “Slide Show” tab.

Step 2:  Click the button that says “Set Up Slide Show.” A new window will pop up.

Step 3:  Under “Show options,” find the magic checkbox that says “Loop continuously until ‘Esc’.” Check that box to make your presentation run on repeat.

Step 4:  Want to control how long each slide shows? Look for the option “Automatically advance slides” and check it. Then, use the up and down arrows to set the display time for each slide.

Step 5:  Once you’re happy with the settings, click “OK” to save them.

Step 6: Time to loop! Go back to the “Slide Show” tab and click “From Beginning” (or “From Start”). Your presentation will start playing and keep going until you press the “Esc” key.

How To Loop a PowerPoint SlideShow from Selected Slides?

PowerPoint lets you loop a customized selection of slides, creating engaging presentations that run unattended. This eliminates the need for manual slide changes while maintaining audience interest. Here’s how to loop specific slides:

Step 1:  Select Slides: In the Slide Sorter view, hold “Shift” and click the first and last slides you want to loop.

Step 2:  Enable Looping: Go to the “Slide Show” tab and click “Set Up Show.” Check the box for “Loop continuously until ‘Esc'” and choose “Show slides” from the dropdown menu. Select “From” and enter the slide number where your loop should begin.

Step 3:  Create Custom Show (Optional): For easier access, name your looped sequence as a “Custom Show” within the “Set Up Show” dialog.

Step 4:  Start Looping: Navigate back to the “Slide Show” tab and choose “Custom Slide Show” to launch your looped presentation.

Closing Thoughts

Looping your PowerPoint presentation is a simple yet powerful technique that unlocks a variety of use cases. By following these steps, you can ensure your message runs continuously, keeping your audience informed and engaged, whether it’s at a kiosk, trade show booth, waiting room, or any other scenario that demands unattended playback. 

• No design skills required
• 3 presentations/month free
• Don’t need to learn a new software

Frequently Asked Questions

My presentation has animations and transitions. will they loop as well.

Absolutely! When you loop your presentation, animations and transitions will also repeat continuously, regardless of the looping method you choose.

Does looping affect animation timing?

There’s a possibility. Looping might affect how your animations play out, especially if they have specific timings set. To avoid any hiccups, be sure to thoroughly test your looped presentation. This will ensure your animations sync smoothly with the slide transitions.

Can I loop specific slides in my PowerPoint presentation?

Yes! PowerPoint gives you the flexibility to loop a selected group of slides, creating engaging presentations that run unattended.

How do I stop or pause a looped slideshow in PowerPoint?

Need a break? Simply press the “Esc” key on your keyboard to interrupt the looped slideshow at any time.

Can I customize the duration of each slide in a looped PowerPoint presentation?

Yes, you can! PowerPoint allows you to adjust the slide transition settings for each slide. This lets you control how long each slide displays, creating a tailored and dynamic looping experience.

Related Posts

How to Create Agenda Slide in Powerpoint?

Ever feel like your PowerPoint presentations could benefit from a strong start? Using an agenda slide at the beginning can be a helpful way to take charge of your presentation from the get-go.

How to End a PowerPoint Presentation?

Picture this: The lights dim, the room hushes, and your presentation is in full swing. But as you near the end, there’s a sense of anticipation, not boredom. Your audience leans in, hungry for that final spark to ignite their minds. That’s the power of a captivating conclusion. The secret sauce that leaves your audience […]

7X7 Rule in PPT (PowerPoint Presentation)

Captivate your audience with impactful presentations using the 7×7 rule. This design principle encourages a clear and focused approach by limiting slides to a mere 7 lines of text, each containing a maximum of 7 words. By adhering to this format, you can craft presentations that are not only easy to digest but also leave a lasting impression on your viewers. Let’s jump into the article and find out how it works.

Save Time and Effortlessly Create Presentations with SlidesAI

One Time Code

< Go back to Login

Forgot Password

Please enter your registered email ID. You will receive an email message with instructions on how to reset your password.

How To Loop A PowerPoint Slideshow? Detailed Guide

Microsoft PowerPoint is a popular application for creating and delivering presentations. PowerPoint has numerous options for adding flair and taking your presentations a notch higher, such as the ability to incorporate YouTube videos, GIFs, etc. If you loop your PowerPoint, every slide will display for a predetermined duration. After the presentation, it will automatically resume from the beginning.

But the question is, can you use the looping function effectively? When used correctly, this feature eliminates the need for presenters to click a mouse or computer key to transition between slides. This feature is easy to set up and customize.

Today’s guide will teach us how to loop a PowerPoint slideshow and various tips and tricks for effective looping.

Why You Need to Loop Your Slideshow in PowerPoint?

Before learning how to loop a PowerPoint slideshow, let’s see under what scenarios one needs to loop their slideshow:

One helpful tool in PowerPoint that helps to guarantee a smooth and continuous presentation experience is the ability to loop your slideshow. The constant playback draws and maintains audience attention whether you present information in automated presentations, build interactive kiosks, or show information in exhibitions. Looping makes it possible to communicate information effectively and reinforce essential points for audience members who might join the presentation at different times. 

How to Make a PowerPoint Loop?

You can learn how to make a PowerPoint loop through the instructions below. You can use the loop for various events, such as trade exhibitions, information displays, or kiosks.

• Open the PowerPoint presentation that you wish to loop first.
• Go to the Slide Show Tab: The PowerPoint window has several tabs at the top. To access choices relating to presenting your slides, select the “Slide Show” tab.
• Access Setup Show: Several commands and choices are under the “Slide Show” tab. Search for the “Set Up Slide Show” button or menu item in the group labeled “Start Slide Show.” Click on it.
• Display Type: Select “Presented by a speaker (full screen).”
• Preview slides: If you want the slides to play automatically, select “Manually” or enter the desired duration for each slide’s PowerPoint presentation loop timing.
• Enable your presentation to loop indefinitely unless you manually end it by hitting the Escape (‘Esc’) key by enabling this option.
• Click OK: After adjusting these settings to store your options, click the “OK” button.
• Begin Your Loop: Your slides will be set to loop unless you manually stop it by pressing the ‘Esc’ key. To stop it, click “From Beginning” or “From Current Slide” under the “Slide Show” tab to begin your presentation.

How to Loop a PowerPoint SlideShow from Selected Slides

You can choose which slides you want to loop around in PowerPoint. Eliminating manual intervention and maintaining audience interaction can be achieved by carefully choosing which slides to show throughout the presentation. Follow these steps to learn how to loop a PowerPoint slideshow from selected slides: 

• Select the “Slide Show” option to start a loop for a particular set of slides. To initiate the loop, click the first slide in the thumbnail pane on the left.
• Click the final slide you wish to add to the loop while holding your keyboard’s “Shift” key. Next, select “Setup Show” and turn on the looping feature.
• Choose the “Custom Show” option and give it a name in the “Set Up Show” dialogue box. Navigate to the “Slide Show” menu and select “Custom Slide Show” to begin your looping presentation from the selected slides.

How to Set Up Auto-Loop for Continuous Playback

Now you know how to loop a slideshow in PowerPoint from selected slides, let us see how you can set up auto-loop for continuous playback: 

• Select the Slide Show tab.
• Press the Set Up Slide Show button. You’ll see an options window appear.
• Keep clicking Loop till you reach “Esc.”

Note: Under Show Type, select Presented by a speaker or Browsed by an individual if you want the speaker or individual to continue controlling the presentation and clicking between slides. Clicking “Browsed” at a kiosk checks the Loop until the “Esc” box appears continuously. Moreover, auto-looping may annoy your viewers if your presentation is very repetitive. Use it with discretion and only when it makes sense for your writing subject.

How to Loop A PowerPoint SlideShow Using 2007 Version (older versions).

Use these detailed instructions to loop your slides if you’re using an older version of Microsoft PowerPoint:

• Open your PowerPoint presentation on your 2007 Microsoft PowerPoint .
• Select the tab labeled Slide Show. Select the “Set Up Slide Show” option from the “Set Up” menu.
• Go to the “Show options” section and select “Loop continuously until ‘Esc'” from the dialogue box that appears. Click Ok.
• Select your initial slide from the “Slides” preview side panel. To select your final slide, press and hold Shift. 
• Select the tab labeled “Animations.” Turn off “On Mouse Click” and check the “Automatically After” box.
• The “After” box in the “Timing” panel has up and down arrows that you can use to change the time each slide appears. It will automatically loop back to the first slide when your slideshow reaches the last one.

How to Stop or Pause your Slideshow loop at any point.

Learning how to make a PowerPoint loop is of no use if you don’t know how to stop or pause your slideshow loop at any point: 

You can use simple keyboard commands to pause or stop your slideshow loop at any time during a PowerPoint presentation. You can manually stop the looping slideshow by hitting the “Esc” key (also known as the Escape key) on your keyboard. It gives presenters a simple and quick option to stop the continuous playback so they can answer queries, have conversations, or go to particular slides that are not playing continuously.

Advanced Techniques for Creating a Seamless Loop in PowerPoint

One of the techniques used for creating a seamless loop in PowerPoint is incorporating videos and GIFs. PowerPoint’s animations, transitions, and triggers can create seamless looping. Here is how:

• Select the video you imported and added to a slide.
• Open the “Animations” tab from the main menu.
• Choose “Play” from the animation gallery’s “Media” section after clicking the “ Add Animation ” button.
• On the right side of the screen, click the “Animation Pane” to open it.
• Right-click the “Play” button and choose “Timing” in the “Animation Pane.”
• Choose “Until End of Slide” or “Until Next Click” as the “Repeat” option in the “Timing” tab.
• Use Triggers to adjust the start and stop times of the video.

Tips and Tricks for Effective Slideshow Looping in PowerPoint

As you can see, creating a PowerPoint loop video couldn’t be easier. It only takes three easy steps to complete. Nonetheless, there are always specific tips you may apply to improve the appeal and attention-grabbingness of your videos.

1. Selecting the Right Video

The length and content of the video are the primary considerations when discussing the “right” video. Therefore, consider the duration of your video when creating a continuous loop.

Yes, longer videos can be more captivating, but they may add to the presentation’s file size and degrade performance. Shorter video clips, however, are less likely to affect performance and can loop more naturally. Regarding the video’s substance, make sure it supports the main idea of your presentation and is pertinent to the subject of your talk. The video aims to increase viewer comprehension and engagement without becoming overbearing or intrusive.

2. Compressing Video Files

Large videos can detract from the overall image of your presentation by making it excessively slow and challenging to share. Therefore, consider using a specialized video compression tool or the built-in PowerPoint compression feature to optimize your presentation by compressing the files. It doesn’t always imply that your presentation will look grainy. Still, it can cause a noticeable quality loss, so keep that in mind when creating the presentation in the first place.

3. Examining the Presentation

Make sure the video loops accurately and smoothly by testing it before you deliver your presentation. Go over the entire presentation, looking for any inconsistent or problematic playback. If you complete your testing on time, you can safely make all the required changes and retest it until the loop video functions as planned.

4. Looping Videos to Create Ambience and Background

You can also use videos that loop to set the mood for your presentation. For instance, a natural setting or a soft animation can produce an aesthetically pleasing and captivating ambiance. Nevertheless, the presentation’s general subject and the background clip are complementary rather than distracting.

To sum up, looping your PowerPoint slideshow is simple. PowerPoint’s “Set Up Slide Show options” allow you to program it to loop indefinitely for a predetermined number of times.

Use transitions carefully, arrange your slides in the correct order, and adhere to best practices while making your looping PowerPoint to give it a polished, professional appearance. Your looping slideshow can operate flawlessly at events without supervision with the correct settings.

How to Loop Slideshow In Powerpoint?

To loop a slideshow in PowerPoint, go to the “Slide Show” tab, select “Set Up Slide Show,” check “Loop continuously until ‘Esc’,” and click “OK.”

Can I loop specific slides within my PowerPoint presentation?

Yes, PowerPoint allows you to loop specific slides.

How do I stop or pause a looped slideshow in PowerPoint?

To interrupt a looped slideshow at any point, simply press the “Esc” key on your keyboard.

Can I customize the duration of each slide in a looped PowerPoint presentation?

Yes, you can control the timing of each slide by adjusting the slide transition settings, allowing for a tailored and dynamic looping experience.

Can SlideUpLift templates be used in looped presentations?

Yes, SlideUpLift provides PowerPoint templates that are compatible with looped presentations. These professionally designed templates can enhance the visual appeal of your slides, making your looped presentation more engaging and impactful.

Table Of Content

Related presentations.

Business Review PowerPoint Template

Business Case PowerPoint Deck Template

Project Status Review Deck Template

Related posts from the same category.

18 Mar, 2024 | SlideUpLift

How To Merge Two PowerPoint Presentations? Detailed Guide On How To Combine PowerPoints

If you work in sales, customer service, or as an independent consultant, you may need to utilize the same templates in many of your presentations. Of course, you don’t want

3 Feb, 2023 | SlideUpLift

How To Make A Graph In PowerPoint?

Do you need help communicating data effectively in your presentations?  Data visualization is an essential tool in today's world as it helps represent complex data sets in a simple and

8 Dec, 2022 | SlideUpLift

How To Use Transparency In PowerPoint?

PowerPoint's user-friendly design has made it a top choice among many, one of the key contributing factors to its immense popularity. Microsoft PowerPoint is one of the most used software

25 Jan, 2018 | SlideUpLift

How To Reduce PowerPoint File Size & Compress A PowerPoint

This PowerPoint tutorial explains how to reduce powerpoint file size. Business presentations contain a huge number of slides filled with graphics, audios, videos, etc. making it bulky and taxing on

19 Apr, 2023 | SlideUpLift

How To Add PowerPoint Borders To Your Presentation

Adding borders in PowerPoint is an essential aspect of presentation design as it helps to enhance the visual appeal of your slides. Customizing your presentation with borders can be a

16 Apr, 2020 | SlideUpLift

How To Broadcast A PowerPoint Presentation Online | PowerPoint Tutorial

In this blog, you will learn a powerful PowerPoint feature of how to remotely present a PowerPoint online. In today's time, countless people need to work from home and maintain

19 Aug, 2020 | SlideUpLift

How To Add Speaker Notes in PowerPoint

Are you tired of fumbling through your PowerPoint presentations, struggling to remember every single point you wanted to make? Or are you concerned you'll forget a crucial detail during a

How To Add Annotations In PowerPoint | How To Add Comments In PowerPoint

This PowerPoint tutorial explains how to add annotations in PowerPoint in simple steps. Often presentations are used in business discussions and interactive sessions. During the discussion, you might need to

26 Dec, 2022 | SlideUpLift

How to make a table in PowerPoint?

Tables are an essential element of any presentation, as they allow you to organize and present data in a clear and concise manner. Whether you're creating a business presentation, a

17 Jan, 2023 | SlideUpLift

How to Share PowerPoint Presentations on Microsoft Teams?

In today's digital age, remote work and virtual meetings have become the norm. As a result, knowing how to communicate effectively and collaborate with your team, regardless of location, is

Related Tags And Categories

Forgot Password?

Privacy Overview

Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information

Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.

• Customer Help
• X (Twitter)

How to Loop a PowerPoint Presentation: A Simple Step-by-Step Guide

Looping a PowerPoint presentation so it repeats continuously can be very useful for trade shows, lobbies, or other situations where you want your presentation to play on recur. The process is relatively simple and only takes a few steps. In this article, we’ll walk through how to set up a Microsoft PowerPoint presentation to loop automatically. First we’ll discuss why you may want a looping presentation. Then we’ll cover the steps to configure the loop in PowerPoint.

How to Loop a PowerPoint Presentation

Follow these easy steps to set up a looping PowerPoint slideshow in Microsoft PowerPoint 2022 or 365:

• It will repeat, moving from the first slide to the last slide and back to the beginning until you press “Esc”.

With a few mouse clicks, you can easily set up continuous looping for your PowerPoint slide – perfect for unattended presenting.

Tips for How to Loop Slides in PowerPoint

When creating a looping PowerPoint slideshow, keep these tips in mind:

• Time your slides appropriately – 10-20 seconds per slide is ideal. Don’t make them too short or long.
• Use transitions like fades and wipes. Avoid distracting transitions that could disrupt the flow.
• Focus on visuals more than heavy text, which viewers won’t fully read.
• Create a narrative flow from beginning to end, even if it loops.
• Check audio levels if using sound to ensure proper volume.
• Consider adding interactive elements like hyperlinks.
• Preview and test thoroughly to polish schedule and flow.
• Adjust slide timing in the “Set Up Slide Show” menu if needed.

Properly schedule and planning your looping PowerPoint ppt helps create a professional, seamless presentation. See Microsoft’s guide for more tips on perfecting your looping slideshow.

Alternatives to Looping a PowerPoint Presentation

If you want more flexibility than simply looping your PowerPoint slideshow, consider these other approaches:

• Export as a video – Convert your PowerPoint to an MP4 video file that can play on replay on a TV or monitor. This gives you more options for transitions and schedule plan.
• Use presentation software like ProShow Producer to create self-running shows with advanced options for automatically displaying slides.
• Make a self-running PowerPoint using animations and slide timers to move from one slide to the next automatically without needing to loop it.
• Use digital signage platforms like BrightSign to remotely publish and manage your looping presentation.
• Connect your computer to a TV or large monitor and use a media player to display your Presentation on recur.
• Have a presenter show the PowerPoint live if available during your event, rather than pre-recording it.

Consider your specific display needs and venue setup to pick the best approach for looping your content.

In summary, looping your PowerPoint slideshow is an easy way to create a repeating, unattended presentation. Using the “Set Up Slide Show options” in PowerPoint, you can set it to endlessly loop for a certain number of times.

When creating your looping PowerPoint, properly schedule your slides, use transitions wisely, and follow best practices for a professional, polished look. With the right settings, your looping slideshow can run smoothly at events without supervision.

While PowerPoint makes looping easy, you can also export to video or use other software for more advanced presentation options. In the end, looping gives an effortless way to display your slides on continuous repeat.

We encourage you to try looping your next PowerPoint. By following this guide, you’ll be ready to create a seamless, professional replay slideshow for your event.

You must be logged in to post a comment.

• Business articles (22)
• Google Slides (57)
• Keynote (27)
• PowerPoint (83)
• Support (2)

• Frequently Asked Questions (FAQ)

How to Loop a PowerPoint Presentation

Setting up a PowerPoint slideshow to loop continuously is easy:

• Switch to the Slide Show Ribbon tab.
• Click on Set Up Slide Show .
• Tick the Loop continuously until 'Esc' checkbox.

By default, PowerPoint advances to the next slide only when a mouse click occurs. If you want your slideshow to advance automatically, follow the steps below:

• Select all slides in the navigation pane.
• Switch to the Transitions tab in the Ribbon.
• In the Timing group under Advance Slide tick the checkbox next to After:
• Enter the duration you want each slide to display.

• May 7, 2018

About ShapeChef

Blog Categories

• Slides and Objects
• Video and Audio
• Presentation Tips and Techniques

Copyright © 2024 Wulfsoft. All rights reserved.

• Terms of Service
• Legal Notice

How to Loop a Powerpoint Presentation

Need to create a hands-free PowerPoint presentation that’ll loop continuously? Here’s how.

When you’re trying to create an engaging presentation, you don’t want to be bogged down by your PowerPoint. It should flow seamlessly alongside you, with effective slide transitions timed to match.

Timings don’t necessarily work if you’re not involved in your PowerPoint presentation, however. If you’re using it to display images or video in a shop display, for instance, you’d want your PowerPoint slides to loop continuously.

If you want to loop a PowerPoint presentation, here’s what you’ll need to do.

How to Loop PowerPoint Slides

To create a never-ending PowerPoint presentation, you’ll first need a presentation with multiple slides. Open this up in PowerPoint to begin, then head to the  Slide Show tab on the ribbon bar.

From there, click  Set Up Slide Show to begin modifying your PowerPoint timings.

This will open the  Set Up Show window, where you can modify your PowerPoint settings, including the presentation type and whether the slides continue automatically or not.

Under the  Show Options group, click to enable the checkbox next to the  Loop Continuously until Esc option, then press  OK to save.

This setting will ensure that your PowerPoint presentation will only stop when the Esc key on your keyboard is pressed. After the final slide is reached, it’ll loop back to the first slide and start over.

The only problem with this setting is that it still requires user input. The presentation will loop back to the start, but it won’t advance each slide automatically—you’ll need to set slide transition timings next to have a truly hands-free PowerPoint presentation.

Setting PowerPoint Slide Transition Timings

Rather than clicking your mouse for each new slide, you can set your PowerPoint slides to proceed automatically. This means your slides are timed, and won’t require any user interaction at all once the presentation is active.

To do this, you’ll need to return to press  Slide Show >   Set Up Slide Show  on the ribbon bar. In the  Set Up Show window, click  Using timings, if present under the  Advance slides section.

Click  OK to save and close the window. You’ll now need to set timings for your slides—click the  Transitions tab on the ribbon bar to do this.

Under the  Timing section of the  Transitions tab, you’ll be able to set the length of time your slides will be shown before the next slide appears.

Click to enable the After checkbox, then set a time in the option box next to it. Disregard the On Mouse Click checkbox, as your  Set Up Show settings will override this, but feel free to uncheck the option if you’d prefer.

This setting will only apply to your currently selected slide. You can set individual timings for each slide, or press the Apply to All  button. This will apply the same timing to each of your slides.

You can now test your PowerPoint presentation by clicking  Slide Show > From Beginning on the ribbon bar, or by pressing the  F5 key on your keyboard.

If the settings you applied were correct, your PowerPoint presentation will begin from the start, and each slide will be shown for a set time. When the presentation ends, it’ll loop back to the beginning with no user input.

You can end the presentation as normal by pressing the  Esc key on your keyboard.

Using PowerPoint Show Types

Even when your PowerPoint presentation is set to loop automatically, you can still skip a slide by pressing it, as well as view the controls.

To become a true hands-free kiosk display, you’ll need to change the show type. This will stop users from skipping slides or viewing the slide controls. To do this, press Slide Show > Set Up Slide Show on the ribbon bar.

In the  Set Up Show window, you’ll see three available show types under the  Show types section. To switch to kiosk mode, press the  Browsed at a kiosk (full screen)  option.

Click  OK to save once you’re done, then launch your presentation by pressing  Slide Show > From Beginning or by hitting the  F5 key.

Once enabled, you’ll no longer be able to view any PowerPoint controls or skip a slide, but you can still press the  Esc  key to end the presentation.

Creating Hands-Free PowerPoint Presentations

PowerPoint has proven itself to be the go-to tool for many users looking to create hands-free presentations, but it’s capable of so much more.

You can insert Excel data into PowerPoint to create data-rich presentations or, if you’re looking for something more visual, you can add video to a PowerPoint instead.

Recommended for you

• PRO Courses Guides New Tech Help Pro Expert Videos About wikiHow Pro Upgrade Sign In
• EDIT Edit this Article
• EXPLORE Tech Help Pro About Us Random Article Quizzes Request a New Article Community Dashboard This Or That Game Happiness Hub Popular Categories Arts and Entertainment Artwork Books Movies Computers and Electronics Computers Phone Skills Technology Hacks Health Men's Health Mental Health Women's Health Relationships Dating Love Relationship Issues Hobbies and Crafts Crafts Drawing Games Education & Communication Communication Skills Personal Development Studying Personal Care and Style Fashion Hair Care Personal Hygiene Youth Personal Care School Stuff Dating All Categories Arts and Entertainment Finance and Business Home and Garden Relationship Quizzes Cars & Other Vehicles Food and Entertaining Personal Care and Style Sports and Fitness Computers and Electronics Health Pets and Animals Travel Education & Communication Hobbies and Crafts Philosophy and Religion Work World Family Life Holidays and Traditions Relationships Youth
• Browse Articles
• Learn Something New
• Quizzes Hot
• Happiness Hub
• This Or That Game
• Train Your Brain
• Explore More
• Support wikiHow
• About wikiHow
• Log in / Sign up
• Computers and Electronics
• Presentation Software
• PowerPoint Presentations

How to Loop in PowerPoint on PC or Mac

Last Updated: November 24, 2021

This article was co-authored by wikiHow Staff . Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 22,861 times. Learn more...

Want to create a self-running PowerPoint presentation for your kiosk, trade-show, performance, or event? It's easy to adjust the options in PowerPoint to make your presentation play back in a continuous loop. When you turn on Slide Show Loop in PowerPoint, your presentation will start over again every time it ends, which means you won't need to be present to restart it. This wikiHow article will show you how to make your PowerPoint presentation loop indefinitely.

• If you haven't yet created your presentation, make one and save it as a file before proceeding.

• For example, to change the amount of time spent on each slide to 10 seconds, you would change the 00:00.00 text box to read 00:10.00 .

• Click File in the upper-left side of the window.
• Click Save As on the left side of the page.
• Double-click the This PC tab in the middle of the page.
• Click the "Save as type" drop-down box, then click PowerPoint Show in the drop-down menu.
• Enter a file name and select a save location.
• Click Save .

• If you're unhappy with a slide's display time, you can change the time by opening the presentation, going back to the Transitions tab, and adjusting the "After" text box.
• You can open a Show file in PowerPoint by dragging the Show file into the PowerPoint window.

• For example, to change the amount of time spent on each slide to 10 seconds, you would type 10.00 into the text box.

• Click File .
• Click Save As... .
• Click the "Format" drop-down box.
• Click PowerPoint Show (.ppsx) in the drop-down menu.

Expert Q&A

• If you use Microsoft Office 365, you can save your PowerPoint presentation as a video instead of a PowerPoint file and then loop the video using your computer's video player's "Loop" function. Thanks Helpful 0 Not Helpful 0

You Might Also Like

• ↑ https://support.office.com/en-us/article/create-a-self-running-presentation-57fc41ae-f36a-4fb5-94a3-52d5bc466037#OfficeVersion=Mac
• ↑ https://support.office.com/en-us/article/file-formats-for-saving-and-exporting-presentations-in-powerpoint-for-mac-a4b76110-697c-496f-b9c5-e318f2bd6eba

About This Article

• Send fan mail to authors

Is this article up to date?

Featured Articles

Trending Articles

Watch Articles

• Terms of Use
• Privacy Policy
• Do Not Sell or Share My Info
• Not Selling Info

wikiHow Tech Help Pro:

Level up your tech skills and stay ahead of the curve

How to: Effortlessly Create PowerPoint Looping Presentations

Looping presentations in PowerPoint can be a game-changer for those needing to display information continuously. It’s a straightforward process: Set up your slides, head to the ‘Slide Show’ tab, click on ‘Set Up Slide Show’, tick the ‘Loop continuously until ‘Esc” box, and voila – your presentation is set to loop.

After completing this action, your PowerPoint presentation will automatically replay from the beginning once it reaches the end. This is particularly useful for presentations displayed at kiosks, trade shows, or in waiting areas, ensuring your audience doesn’t miss any content.

Introduction

Ever been to a trade show and noticed how some booths have screens with presentations that seem to run endlessly? That’s the magic of looping presentations, a feature that’s built into PowerPoint but not always used to its fullest potential.

Having a presentation loop can serve multiple purposes. For those in marketing, it means your message is continually being broadcast without the need for manual intervention. For educators, it could mean students have more time to absorb information. And for those in the corporate world, it ensures that important data is consistently on display for stakeholders and team members to see.

Looping presentations are not only efficient but also incredibly simple to set up in PowerPoint. Knowing how to do this is a great skill to have in your back pocket. Whether you’re prepping for an exhibition, setting up a self-running informational display, or just want to make sure your audience can see your presentation in its entirety, no matter when they walk in the room – this article is for you.

PowerPoint Looping Presentations Tutorial

Before diving into the steps, it’s important to understand what we’re aiming to achieve. By the end of this tutorial, your PowerPoint presentation will be capable of running on its own, looping endlessly until manually stopped. It’s an excellent way to keep an audience engaged with your content, even if you’re not actively presenting.

Step 1: Open your PowerPoint presentation

Open the PowerPoint presentation you wish to loop.

When you have your presentation open, you’ll want to ensure that all your slides are in the correct order and that any timings, animations, or transitions are set up as you want them. This is crucial because once the presentation starts looping, these aspects will play over and over again.

Step 2: Click on the ‘Slide Show’ tab

Navigate to the ‘Slide Show’ tab located on the ribbon at the top of PowerPoint.

The ‘Slide Show’ tab is where you’ll find all the settings related to the presentation’s display. It’s your control center for how the presentation will run.

Step 3: Select ‘Set Up Slide Show’

Click on the ‘Set Up Slide Show’ button within the ‘Slide Show’ tab.

This action opens a new window with various options for running your presentation. It’s like the backstage area before a performance, where you make all the necessary tweaks.

Step 4: Choose ‘Loop continuously until ‘Esc”

In the ‘Set Up Show’ window, check the box that says ‘Loop continuously until ‘Esc”.

This is the setting that transforms your presentation from a one-time run-through to an endlessly looping display. It’s the crucial step in ensuring your content gets maximum exposure.

Step 5: Save your settings

Click ‘OK’ to save your settings and close the ‘Set Up Show’ window.

Once you’ve clicked ‘OK’, your presentation is all set to loop. You can start the slideshow to test it out and see your handiwork in action.

Continuous Display

By looping your PowerPoint presentation, you ensure that no matter when someone walks by or starts watching, they’ll be able to see the whole thing. It’s ideal for environments where you have a rotating audience, like at conferences or informational booths.

Time-Saving

Once set up, you don’t need to stick around to restart the presentation. It loops automatically, freeing you up to do other things – like interacting with your audience or managing other aspects of your event or meeting.

Professionalism

A self-running, looping presentation can make a statement about your professionalism. It shows that you’ve put thought into how your information is presented and that you’re adept at using technology to enhance your message.

Can be Ignored

When people know a presentation is looping, they might not give it their full attention, thinking they’ll catch the next round. This could mean your message isn’t hitting home as strongly as you’d like.

Technical Issues

Technology isn’t foolproof. If your PowerPoint or the device it’s running on experiences issues, your looping presentation could grind to a halt – often at the most inopportune times.

Repetitiveness

For those who are around for a while, a looping presentation can become like that one song on the radio that’s played too often – annoying. Finding the balance between informative and overkill is key.

Additional Information

PowerPoint’s looping feature might seem simple, but it can be incredibly powerful when used correctly. Think about the last time you walked past a looping video or presentation – it probably caught your eye, at least for a moment. That’s the draw of a looping display; it’s always there, always ready to catch the attention of someone new.

One tip is to ensure your presentation is designed with looping in mind. This means avoiding content that could become quickly dated or using language that implies the presentation is a one-time event. Instead, use evergreen content that will be relevant no matter how many times it’s viewed.

Another consideration is the length of your presentation. If it’s too long, viewers might not stick around for the whole loop, missing out on key information. If it’s too short, it could become annoyingly repetitive. Striking the right balance is essential.

When setting up your looping presentation, think about the context in which it will be viewed. Is it in a noisy trade show hall? Consider adding subtitles or visual cues that can be understood without sound. Is it in a quiet waiting area? Maybe a softer, less attention-grabbing approach is needed.

Remember, the goal of a PowerPoint looping presentation is to inform and engage, not to overwhelm or annoy. Keep your audience’s experience in mind, and you’ll be sure to create a looping presentation that adds value and captures interest.

• Open your PowerPoint presentation.
• Click on the ‘Slide Show’ tab.
• Select ‘Set Up Slide Show’.
• Choose ‘Loop continuously until ‘Esc”.
• Save your settings.

Frequently Asked Questions

What if my presentation has videos.

If your presentation contains videos, make sure they’re set to play automatically and check the box ‘Rewind after playing’ to ensure they loop with the rest of the slides.

Can I loop just one section of my presentation?

Yes, you can loop specific sections by using custom shows within PowerPoint. It’s a bit more complex but entirely possible.

Will looping work if I have transition timings set up?

Absolutely. Your slides will transition according to the timings you’ve set, looping back to the beginning when they reach the end.

How do I stop a looping presentation?

Simply press the ‘Esc’ key, and the presentation will stop looping and exit the slideshow view.

Can I loop a presentation on a Mac?

Yes, the steps are the same for PowerPoint on a Mac as they are for Windows.

Mastering PowerPoint looping presentations is like unlocking a new level in your presentation skills. It’s not just about making your slides look pretty; it’s about ensuring your message is always out there, always engaging, and always ready to inform. Whether you’re in the boardroom, at a booth, or in an educational setting, a well-crafted looping PowerPoint can make all the difference.

So go ahead, give it a try – your audience will thank you for it. And remember, the best presentations are those that not only deliver information but do so in a way that’s seamless and ever-present, just like the perfect loop.

Matthew Burleigh has been writing tech tutorials since 2008. His writing has appeared on dozens of different websites and been read over 50 million times.

After receiving his Bachelor’s and Master’s degrees in Computer Science he spent several years working in IT management for small businesses. However, he now works full time writing content online and creating websites.

His main writing topics include iPhones, Microsoft Office, Google Apps, Android, and Photoshop, but he has also written about many other tech topics as well.

Read his full bio here.

Share this:

Join our free newsletter.

Featured guides and deals

You may opt out at any time. Read our Privacy Policy

Related posts:

• How to Loop a Slideshow on Powerpoint 2013
• How to Set Time for Slides in Powerpoint
• How to Use Looping Backgrounds in PowerPoint: A Step-by-Step Guide
• How to Save Powerpoint as PDF with Notes
• Can I Convert My Powerpoint to Google Slides?
• How to Drag Slides From One PowerPoint to Another: A Step-by-Step Guide
• How to Unhide a Slide in Powerpoint 2013
• How to Add Page Numbers in Powerpoint 2010
• How to Make a Powerpoint Slide Vertical in Powerpoint 2013
• How to Delete a Slide in Powerpoint 2010
• How to Hide a Slide in Powerpoint 2010
• How to Create a PowerPoint Presentation Step by Step: 2024 Guide
• How to Delete Multiple Slides in Google Slides
• How to Insert Slides from Another Presentation in Powerpoint 2010
• How to Change the Font on All Slides in Google Slides
• How to Rotate a Slide in PowerPoint: A Step-by-Step Guide
• How to End Powerpoint on Last Slide in Powerpoint 2010
• How to Run Powerpoint in Kiosk Mode: A Step-by-Step Guide
• How to Change Line Spacing in Powerpoint for Every Slide at Once
• How to Loop a Video on iPhone: A Step-by-Step Guide

How to Create a Looping Slideshow in PowerPoint

You can easily create a looping slideshow using PowerPoint. A looping slideshow displays each slide automatically for a certain amount of time. Once that time has elapsed, the slide automatically continues to the next slide. Once the slideshow reaches the end, it repeats from the beginning.

• Open your PowerPoint presentation.
• Click the [Slide Show] tab > From the "Set Up" group, click "Set Up Slide Show".
• From the resulting dialogue box, check "Loop continuously until 'Esc'" under the "Show options" section > Click [OK].
• From the "Slides" preview side panel, click your first slide > Press and hold [Shift] and click your last slide. This will select all of your slides.
• Click the [Transitions] tab > From the "Timing" group, uncheck "On Mouse Click" and check "After".
• To adjust the time you would like each slide to display, click the up and down arrows in the "After:" field within the "Timing" group. When your slideshow reaches the last slide, it will automatically loop back to the beginning.

Posted in Computer Help

Share This Post

Loop your PPT to Run it Automatically | Perfect Kiosk Solution

By: Author Shrot Katewa

Okay, so you have this big event coming up and you need to showcase a company profile of your organisation at a kiosk. You have the company presentation but you are wondering, “How the heck am I going to turn my PPT into a self running presentation that runs in a loop automatically?”

Don’t worry, this is exactly what we are going to learn today. Plus, we share some of the most useful and important tips that you should remember while displaying a PowerPoint presentation for a kiosk. This will ensure that you have a presentation that almost always runs like a video!

But first, can you loop a PowerPoint presentation? Yes, you can definitely loop a PowerPoint presentation. To do this, we’ll need to make all our slides auto advance from to the next slide using the “Transition” tab, and then switching our PPT to the kiosk display mode in PowerPoint such that it runs automatically in a loop.

Let’s learn a bit more about it.

How to Loop your PowerPoint Presentation?

In order to ensure that the presentation plays in a loop, we will have to carry out this procedure in two steps. The first thing that you need to do is to make sure that your presentation shows the next slide automatically when put it slide show mode. Once you have done this, the next step would be to ensure that your presentation jumps back to the first slide when it is done displaying all the slides in your PPT. Doing so will make sure that your presentation continuously keeps playing in a loop.

It is not important to follow steps 1 and 2 in the same order as mentioned below. This means you can also complete step 2 first and then complete step 1. However, it is important that you carry out both the steps in order to achieve the desired result. So, let’s look at both the steps in detail below –

Step 1 – Make a presentation self-running

One of the key steps to ensure that your presentation runs in a loop automatically, is to make sure that it is self-running. The last thing that you would want to do is to manually click to proceed to the next slide for the whole day!

Making your presentation self-running is pretty simple.

Simply open the presentation that you would like to convert into a automatically running PPT. Click on any one slide from the presentation. Go to the “Transition” tab and click on it.

As a next step, make sure you uncheck the “on mouse click” box, and select the “After” option by clicking on the check box. This will ensure that your presentation now shows the next slide after a certain number of seconds rather than a mouse/keyboard click.

Once you have done that, just input the number of seconds that you would like PowerPoint to spend on each slide. I recommend putting a value in the range of 3-5 seconds based on my prior experience. However, I would also suggest that you do a bit of trial and error before finalising the exact number of seconds that work for your presentation.

Once you have identified exactly how many seconds you would like PowerPoint to spend on each slide, make sure to click on “Apply to All”. This will ensure that the transition setting of this slide is applied to every single slide in your presentation.

Note – If you have different transitions setting already set up for each slide, then, instead of clicking on “Apply to All”, make sure that you have selected all the slides by clicking on any one slide in the slide view section and then pressing “Ctrl +A” (or Command + A for Mac).

Step 2 – Loop your PPT by putting it in Kiosk Mode

Once you have made sure that your presentation is self-running, the next step to make sure that your presentation runs in loop.

Just like the first step, this is also quite easy. Let’s have a look –

First, you need to click on the “Slide Show” option in the Menu Bar. On the ribbon, you need to then click on “Set Up Slide Show”. What this option does is allows you to set up how you would like to PowerPoint to play your slide show when running in full screen (or slide show mode).

When you click on the Set Up Slide Show option, a window with multiple options will pop-up on the screen. Under the “Show Options”, identify and select “Loop continuously until Esc”. This basically means that once this option is selected, PowerPoint will loop your slide until you press the “Esc” or the Escape key on your keyboard.

You might also notice the “Browsed at a Kiosk” option under the “Show Type” option on the same pop-up window. This option also does exactly the same thing of looping the PowerPoint slides continuously. Thus, you could also select this option.

Next, just click “Okay” to confirm. Your slides will now loop endlessly automatically until the escape button is pressed on the keyboard. You can try and check if the presentation runs as desired by putting the presentation in slide show mode. The shortcut for that is Shift + Command + Return key on your keyboard for Mac users and F5 for Windows users (Shift + F5 for slide show from current slide)

Can I Loop a Presentation with a Video in it?

That is a great question that many of you might have especially when there is a supporting video or a testimonial or a product review that you want your audience coming to the kiosk to notice.

You can definitely make a PowerPoint presentation run in a loop even when you have a video in the presentation. However, you need to make sure that the video is not on YouTube or any other external location, it needs to be added on the PowerPoint slide.

You can add the video to your PowerPoint presentation by clicking on “Insert”, then selecting “Video” on the insert ribbon. PowerPoint will then ask you to browse to the location of your video file. Do that, select the video from your local hard disk, and click “Okay”. You should have the video inserted on your slide. Alternatively, you can also copy the video from a from the folder in which the video is located, open the target slide on which you need the video to be embedded, and paste it.

Things to keep in mind while looping a presentation with a video file – 

• Make sure that the video is present on the local computer hard disk and not as an online resource
• Ensure that the slide on which the video has been added also has self-running enabled as explained in “Step – 1” above.

Can I loop just a few Specific Slides of a PPT Presentation?

There might be times when you don’t want to run the complete PowerPoint presentation a loop. Instead, you just want to repeat just a few slides from the presentation. So, can this be done? Absolutely Yes!

Putting a few specific slides in a loop is as easy as looping the complete presentation. The process is similar to the two steps mentioned above.

However, do keep a few things to keep in mind – 

• Only consecutive slides can loop – When putting a few specific slides in a loop instead of the complete presentation, the slides in question should all be together. This means, you could choose to put slides 1, 2, 3 & 4 or slides 4, 5, 6, 7 & 8 because they are all consecutive slides. However, slides 2, 5, 7, 9 can’t be put in a loop as they are not consecutive slides. To solve this problem, you can create a copy of all the slides that you want to loop at the end of presentation, and put them in a loop. 
• Apply Step 1 & 2 to only specific slides – Before beginning the steps 1 & 2 mentioned above, make sure that you have selected the specific slides that you wish to loop and not the complete presentation.
• DO NOT click “Apply to All” after step 1 – Ensure that you DO NOT click on “Apply to All” at the end of step 1 as this will make sure that the transition settings that you have selected will be applied to all your slides. 

At the end of step 2, after you have selected “Loop continuously until Esc” and right before clicking OK, make sure to enter the specific slide numbers that you would like PowerPoint to loop. Remember – the slides that you want to loop should be consecutive slides.

What are Some Other Uses of a Presentation running in a Loop?

Making your PowerPoint presentation run automatically in a loop can be useful in situations more than one. The most obvious need to run a presentation continuously is when you are at a kiosk (for e.g. at an event representing your company). But there are some often other times when you feel the need to loop a presentation. I’m sharing some of the other situations when you might need to loop a PowerPoint presentation below –

1. At a Marketing Roadshow –

There are times when your company decides to generate awareness about a new product they are going to launch. One of the methods deployed is to hire a vehicle (with or without an open back), play some visuals accompanied with some audio and distribute a one page flyer to its potential customers. The marketing effort can be more detailed at times, however, the visual that often supports such a campaign can often be a presentation that needs to run continuously without interruption.

2. At a Sales Centre –

Another great use case for a continuous looping presentation. When you visit a sales centre/showroom of a company – a real estate company or even a vehicle showroom, you may notice a presentation playing in such an office. This is often because the customers who walk in may have questions about the product or offering and having a beautiful looping presentation can grab the attention of a customer.

3. Reception/Cafeteria of a company –

Often, various companies use a looping presentation to share more information about the company to its visitors or employees. You may notice a presentation that plays in a loop at the company reception giving information about the company or even at your cafeteria telling you about a new employee initiative taken up by the company. These are all great examples where a presentation running automatically in a loop can be useful.

Running a PowerPoint presentation in a loop continuously is simply and super helpful. My hope is that by reading this blog post, you now know how to loop your PPT and are ready for the next event!

Our goal on this blog is to create content that helps YOU create fantastic presentations; especially if you have never been a designer. We’ve started our blog with non-designers in mind , and we have got some amazing content on our site to help YOU design better.

If you have any topics in mind that you would want us to write about, be sure to drop us a comment below. In case you need us to work with you and improve the design of your presentation, write to us on [email protected] . Our team will be happy to help you with your requirements.

Lastly, your contribution can make this world a better place for presentations!  All you have to do is simply share this blog in your network and help other fellow non-designers with their designs!

How to Record a PowerPoint Presentation

Knowing how to record a PowerPoint presentation with audio and video can provide viewers with an engaging experience. Whether you're creating a tutorial , a lecture, or a business presentation, combining visuals with narration helps convey your message more effectively.

In this guide, we will walk you through the step-by-step recording process in PowerPoint . From setting up your equipment and recording your screen to editing the final video, you'll learn everything you need to know about creating narrated PowerPoint presentations.

Prepare everything

• Presentation . Ensure your slides are complete and in the correct order. Update PowerPoint to the latest version for the best performance and features.
• Microphone . Use a good-quality microphone to record clear audio . A USB or headset microphone is recommended.
• Webcam (Optional) . If you want to include a video of yourself, use a built-in or external webcam.
• Script . Outline what you want to say for each slide. This will help you stay on track during the presentation recording.

How to record a PowerPoint presentation?

1. set up a screen recorder.

Download and install the free screen recording software for Windows from the official website. Launch the video recorder on your computer.

Easy to use free screen recorder for PC. Record desktop, take screenshots, upload the created content to the cloud for easy and fast sharing.

2. Configure settings

Go to " Settings " to set recording preferences .

• In " Video ", choose the desired output quality and format. Make sure the toggles next to " Record mouse movements " and " Animate mouse clicks " are enabled if needed.
• In the " Audio " tab, adjust the sound levels and select the desired input devices.

3. Record your presentation

Click the " Capture video " option in the side menu and select the mode. Choose the entire display if your presentation is in full-screen mode. You can also manually adjust the screen recording area to show the desired content.

Open your PowerPoint and press the F7 hotkey or click the " Rec " button to record the presentation with audio . Navigate through your slides while speaking clearly into the microphone.

Use drawing tools in the presentation recorder to highlight key points during your narration.

If you need to take a break, use the pause button to temporarily stop the recording. When you've completed your presentation, press the F8 hotkey or click " Stop ".

4. Editing the final video

Use the built-in video editor to trim any unwanted parts of the presentation recording. You can also adjust the playback speed, change the format, and resize the video.

If you need to make more changes, you can import your recorded clip into third-party video editing software . Add transitions, effects, background music, or other enhancements as needed.

Save your edited video in the desired location. It is also possible to upload the recording to the cloud and share it via a link .

FAQ on how to record a presentation

PowerPoint screen recording with audio and video is a powerful way to enhance your message and engage your audience. By following the steps outlined in this guide, you can create professional and polished videos that combine your slides with a voice-over .

Whether you're an educator, business professional, or content creator, knowing how to narrate a PowerPoint presentation recording can significantly boost your impact. Remember to practice your delivery and utilize editing tools to refine your final product.

Expert Tech Writer

Like the article? Share it!

PowerPoint Slide or Lecture Note References

This page contains reference examples for PowerPoint slides or lecture notes, including the following:

• PowerPoint slides available online
• PowerPoint slides from a classroom website

Use these formats to cite information obtained directly from slides.

If the slides contain citations to information published elsewhere, and you want to cite that information as well, then it is best to find, read, and cite the original source yourself rather than citing the slides as a secondary source.

Writers creating PowerPoint presentations in APA Style should present information clearly and concisely. Many APA Style guidelines can be applied to presentations (e.g., the guidance for crediting sources, using bias-free language, and writing clearly and concisely).

However, decisions about font size, amount of text on a slide, color scheme, use of animations, and so on are up to writers; these details are not specified as part of APA Style.

1. PowerPoint slides available online

Jones, J. (2016, March 23). Guided reading: Making the most of it [PowerPoint slides]. SlideShare. https://www.slideshare.net/hellojenjones/guided-reading-making-the-most-of-it

• Parenthetical citation : (Jones, 2016)
• Narrative citation : Jones (2016)
• When the slides are available online to anyone, provide the site name on which they are hosted in the source element of the reference, followed by the URL of the slides.

2. PowerPoint slides from a classroom website

Mack, R., & Spake, G. (2018). Citing open source images and formatting references for presentations [PowerPoint slides]. Canvas@FNU. https://fnu.onelogin.com/login

• Parenthetical citation : (Mack & Spake, 2018)
• Narrative citation : Mack and Spake (2018)
• If the slides come from a classroom website, learning management system (e.g., Canvas, Blackboard, Moodle, Sakai), or company intranet and you are writing for an audience with access to that resource, provide the name of the site and its URL (use the login page URL for sites requiring login).
• If the audience for which are you writing does not have access to the slides, cite them as a personal communication .

PowerPoint slide references are covered in the seventh edition APA Style manuals in the Publication Manual Section 10.14 and the Concise Guide Section 10.12

How to Use Translate Feature in PowerPoint

In today’s interconnected world, the ability to communicate effectively across languages is more important than ever. Whether you’re presenting at an international conference, collaborating with global teams, or creating multilingual content for your audience, PowerPoint’s translation feature is a powerful tool that can bridge language gaps effortlessly.

Imagine you’re presenting a groundbreaking idea to a large audience and want to ensure everyone understands your message without language barriers. Or maybe you’re preparing a presentation to share with partners worldwide. In both cases, translating your slides can make your content more accessible.

This article will walk you through the step-by-step process of applying the translation feature in PowerPoint, helping you to break down language barriers and enhance the impact of your presentations. Let’s see how to apply this secret feature.

Step 1: Open Your Slide

Start by opening the PowerPoint presentation and navigating to the specific slide that contains the text you want to translate. Ensure that the text you wish to translate is visible and selected.

Step 2: Head Over to the Review Tab

Go to the “Review” tab on the ribbon at the top of your PowerPoint window. This tab contains various tools related to reviewing and editing your presentation.

Step 3: Select Translate

In the “Review” tab, find and click on the “Translate” button located in the Language section. This will open the translation options.

Step 4: Click on the Text Box You Want to Translate

Click on the text box or text area that you wish to translate. This action will highlight the text and make it ready for translation.

Step 5: Look Over to the Right Side of Your Screen

After selecting the text, look to the right side of your screen where the translation pane will appear. This pane will display translation options and a text box for your selected content.

Step 6: The Translator Window Will Appear

In the translation pane, you will see various language options. Choose the language you want to translate your text into by selecting from the dropdown menu.

Step 7: Click on Insert to Apply the Translation

After selecting your preferred language, click on “Insert.” This will automatically replace the original text with the translated text in the selected language.

Final Thoughts

PowerPoint’s translation feature is like having a personal translator for your slides. It helps you reach a global audience by turning your text into different languages with just a few clicks. Whether you’re presenting to an international crowd or sharing with friends around the world, this tool makes sure everyone understands your message.

So why not give it a shot? It’s an easy way to make your presentations more inclusive and keep everyone in the loop—no language barriers, no problem!

At SlideBazaar, we help you create engaging and memorable presentations. Choose from our collection of professional templates or opt for our custom design services for a personalized touch. Your presentations deserve to be elevated to new heights, and we’re here to help you achieve just that!

BROWSE BY CATEGORY

• PowerPoint Templates
• Keynote Presentations
• Infographic
• Free slides

QUICK LINKS

• Frequently Asked Questions
• Terms & Conditions
• Privacy Policy
• DMCA Policy

EMAIL NEWSLETTER

Get updates of our PowerPoint templates and slide designs before anyone else.

• Powerpoint Tutorials

How To Make A Hyperlink In PowerPoint

Creating hyperlinks in PowerPoint can significantly enhance your presentations by making them more interactive and engaging. Whether you want to link to a website, another slide, or a different file, the process is simple. In this guide, we’ll walk you through the steps on how to make a hyperlink in PowerPoint, ensuring even beginners can follow along easily.

What Is a Hyperlink?

A hyperlink is a link that, when clicked, takes you to another location, such as a webpage, a different slide in the presentation, an email address, or another file. Hyperlinks are useful for adding interactivity to your slides, allowing you to navigate through different sections smoothly or provide additional resources to your audience.

Why Use Hyperlinks in PowerPoint?

• Interactive Presentations: Hyperlinks make your presentation more dynamic and engaging.
• Easy Navigation: Quickly move between slides or to external content.
• Additional Resources: Provide easy access to supplementary materials.
• Professional Look: Enhances the professionalism and functionality of your presentation.

Types of Hyperlinks in PowerPoint

• Webpage Links: Direct your audience to a specific website.
• Slide Links: Navigate to another slide within your presentation.
• Email Links: Open an email client with a predefined email address.
• File Links: Link to external files like PDFs, Word documents, or other presentations.

Step-by-Step Guide to Creating Hyperlinks in PowerPoint

1. hyperlink to a webpage, step 1: select the text or object  .

First, highlight the text or select the object (like an image or shape) you want to turn into a hyperlink.

Step 2: Open the Hyperlink Dialog Box  

Go to the “Insert” tab on the Ribbon. In the “Links” group, click on “Hyperlink.” Alternatively, you can right-click the selected text or object and choose “Link” or “Hyperlink” from the context menu.

Step 3: Enter the URL  

In the “Insert Hyperlink” dialog box, enter the URL of the webpage you want to link to in the “Address” field.

Step 4: Click OK  

Click “OK” to create the hyperlink. Your text or object will now link to the specified webpage.

2. Hyperlink to Another Slide

Highlight the text or select the object you want to link to another slide.

Go to “Insert” > “Hyperlink” or right-click and select “Link.”

Step 3: Choose “Place in This Document”  

In the “Insert Hyperlink” dialog box, choose “Place in This Document” 

Step 4: Select the Slide  

A list of slides will appear. Choose the slide you need to link to and click “OK.”

3. Hyperlink to an Email Address

Highlight the text or select the object you want to turn into an email link.

Go to “Insert” > “Hyperlink” or right-click and choose “Link.”

Step 3: Choose “Email Address”  

In the “Insert Hyperlink” dialog box, click on “Email Address.”

Step 4: Enter the Email Details  

Add the email address you like to link to in the “E-mail address” field. You can also add a subject to the email if desired.

Step 5: Click OK  

Click “OK” to create the email hyperlink.

4. Hyperlink to Another File

Highlight the text or select the object you want to turn into a link to another file.

Step 3: Choose the File  

In the “Insert Hyperlink” dialog box, click on “Existing File or Web Page.” Navigate to the file you want to link to, select it, and click “OK.”

Tips for Using Hyperlinks in PowerPoint

• Test All Links: Before presenting, make sure all hyperlinks work correctly.
• Use Clear Text: Ensure the linked text is clear and descriptive so the audience knows what to expect.
• Consistency: Keep the style of hyperlinks consistent throughout your presentation.
• Backup Files: If linking to external files, ensure they are accessible on the presentation device.

Common Issues and Troubleshooting

• Broken Links: Double-check the URL or file path to ensure accuracy.
• Compatibility: Ensure external files are compatible with the device you’ll be presenting on.
• Hyperlink Formatting: If hyperlinks don’t look like links, manually change the text color and underline style.

Hyperlinks are a powerful tool to enhance your PowerPoint presentations, making them more interactive and informative. By following these simple steps, you can create hyperlinks to webpages, other slides, email addresses, and external files with ease. This guide ensures that even beginners can master the art of creating hyperlinks in PowerPoint, adding a professional touch to their presentations. You can also check out our guide on How to Make a Hyperlink in Google Slides to learn the steps to add hyperlinks in Google Slides. Start linking and make your presentations stand out!

Spread Love

Related blogs.

Arockia Mary Amutha

Arockia Mary Amutha is a seasoned senior content writer at SlideEgg, bringing over four years of dedicated experience to the field. Her expertise in presentation tools like PowerPoint, Google Slides, and Canva shines through in her clear, concise, and professional writing style. With a passion for crafting engaging and insightful content, she specializes in creating detailed how-to guides, tutorials, and tips on presentation design that resonate with and empower readers.

Recent Blogs

What is a PPT and How to Make Impactful Presentations with PowerPoint?

PowerPoint Presentations, commonly known as PPTs, have become an essential tool in various fields such as business, education, and even...

How to Draw on Google Slides: Easy Step-by-Step Guide

Drawing on Google Slides can significantly enhance your presentations, making them more engaging and visually appealing. Whether you’re a teacher,...

How to Include Business Report with Infographic Presentation

These days because we live in a data-driven business world, to be able to express complex information concisely and effectively...

SIGNUP FOR NEWSLETTER

• Vote: Reader’s Choice
• Meta Quest 4
• Google Pixel 9
• Google Pixel 8a
• Apple Vision Pro 2
• Nintendo Switch 2
• Samsung Galaxy Ring
• Yellowstone Season 6
• Recall an Email in Outlook
• Stranger Things Season 5

How to change the background in Powerpoint

You can change the background to anything you like if you're using Powerpoint to create presentations: a picture, a color, a gradient, or even an in-motion video. You'll know the best background for your presentation, but whatever you want to change it to, we're here to help you do it.

How to change the background to a color or gradient

How to add a picture to the background, how to add a video to the background.

Here's how to change the background in Powerpoint to a few different styles.

What You Need

Don't have Powerpoint installed already? Here's how to download it.

Beyond an empty background, the most simple background you can add to your Powerpoint presentation is a flat color, or a gradient from one color to another. Here's how to do it.

Step 1: Open your Powerpoint document and select the slide that you want to change the background for, on the left-hand side. In this example, we're using the standard template for an architectural pitch presentation.

Step 2: Select Design in the top-menu bar.

Step 3: Select Format Background in the top right.

Step 4: From the menu that appears, select either Solid fill or Gradient fill depending on your needs.

Step 5: If you want a solid color, select the paint can icon and choose your color preference. You can select from a range of curated color options, select More colors for a greater array of options, or use the Eyedropper tool to grab a color from the presentation to use for your background.

You can also adjust the transparency using the slider, to fade the color in and out.

If you want a gradient from one color to another, you can select a Preset gradient between two colors — but you can also fine-tune it using the Gradient stops options to control the number and type of color changes within the gradient. You can also adjust the position, transparency, direction, and brightness of the colors and the gradient itself.

Step 6: Play around with the option until you're happy. If you want to start again at any point, select the Reset background button at the bottom of the Format Background menu.

When you're happy with the result, just close the menu down by selecting the X icon in the top-right corner of the Format Background menu. Alternatively, if you want to apply that gradient or solid-color background to every slide, select the Apply to all button at the bottom of the window.

Would you rather make an image the background for your presentation's slide(s)? You can do that too.

Step 1: Select the slide that you want to change the background for, on the left-hand side. Then select Format Background in the top-right.

Step 2: Select Picture or texture fill .

Step 3: If you want to use a texture for the background, select the box next to Texture and choose the texture you want for the background from the pop-out window.

Step 4: If you want to use an image, select the Insert button under the "Picture source" subheading. Then decide where you want to source the image from.

Step 5: Select From a file if you want to use a local image file, then choose it using the file explorer and select Open . If you'd rather source it online, stock images, or the stack of pre-installed logos, select those and follow the on-screen instructions to introduce the image.

Step 6: If you want the image or texture to appear in the background of all slides, select the Apply to all slides button at the bottom right of the screen.

You can embed a video in a PowerPoint presentation , but if you want to really spice up a slide, why not change the entire background to a video? Here's how to do it.

Step 1: Select Insert followed by Video . Choose whether you want to add a video from your local device or an online source. If the former, select it from the file explorer and select Open . If it's online, paste the URL and select Insert .

In this example, I'm using a clip from the 1988 sci-fi comedy Red Dwarf .

Step 2: Use your mouse to drag and move the video so that it covers the portion of the slide that you want it to play on (or the whole thing). You can resize it too, using the corner controls by clicking and dragging.

Step 3: Right-click the video and select Send to back .

You can also take this opportunity to use the built-in controls to trim the video if it needs it, choose when you want it to start (automatically, or when clicked on), and its style — whether you want it to appear at an angle or with a fade around it.

Step 4: When you're happy with the video's implementation, select Slideshow at the top, then select either From beginning or From current slide in the top left to check out the presentation to make sure the video is working correctly.

If it's not in the right position, starts at the wrong point, or isn't formatted how you'd like it, use the right-click controls on the video to make your adjustments.

Now that you've become a master of Powerpoint backgrounds, how about playing around with the new Copilot features? Here are five of the best things you can do with Copilot Pro right now.

Alternatively, hone your presentation creating skills with these Microsoft PowerPoint best practices .

Editors’ Recommendations

• How to add audio to PowerPoint
• How to add notes to your Microsoft PowerPoint slides
• How to convert PDF to PowerPoint
• How to embed a video in PowerPoint
• How to use Microsoft PowerPoint
• How-To Guides

Online team collaboration is the new norm as companies spread their workforce across the globe. Gone are the days of primarily relying on group emails, as teams can now work together in real time using an instant chat-style interface, no matter where they are.

Microsoft Teams is one of many collaboration tools designed to bring company workers together in an online space. It’s not designed for communicating with family and friends, but instead provides a platform for video conferencing, real-time discussions, document sharing and editing, and more for companies and corporations. What is Microsoft Teams? Microsoft Teams is a chat-based workspace initially introduced in 2016 for customers subscribing to the Office 365 Enterprise and Business plans, serving as the successor to Microsoft’s Skype for Business platform. It also replaced the Microsoft Classroom service in Office 365 Education.

Double-spacing is a great way to organize your word processing, and an excellent optimization that is built into most word processing tools. And whenever we hear “word processing,” one of the first programs that comes to mind is Microsoft Word. Learning how to use Microsoft Word is usually straightforward, but it has various formatting features that aren't immediately obvious. Here, we’re going to teach you how to implement double spaces throughout your next Word doc.

Microsoft Word is one of the most feature-rich word processing tools gifted to us human beings. In fact, the very word “Word” has invaded nomenclature to the point where any discussion of this type of software, regardless of what the product is actually called, typically results in at least one person calling the software “Word.”

With each new release of the industry-lauded software, we get more and more capabilities. But this shouldn’t prevent us from knowing how to incorporate classic Word elements, such as the hanging indent. We understand how tough it can be to stay on top of how to use Microsoft Word though, so we’ve made this guide to teach you how to quickly and easily add a hanging indent to your next Word doc.