revising the research paper

Revising Drafts

Rewriting is the essence of writing well—where the game is won or lost. —William Zinsser

What this handout is about

This handout will motivate you to revise your drafts and give you strategies to revise effectively.

What does it mean to revise?

Revision literally means to “see again,” to look at something from a fresh, critical perspective. It is an ongoing process of rethinking the paper: reconsidering your arguments, reviewing your evidence, refining your purpose, reorganizing your presentation, reviving stale prose.

But I thought revision was just fixing the commas and spelling

Nope. That’s called proofreading. It’s an important step before turning your paper in, but if your ideas are predictable, your thesis is weak, and your organization is a mess, then proofreading will just be putting a band-aid on a bullet wound. When you finish revising, that’s the time to proofread. For more information on the subject, see our handout on proofreading .

How about if I just reword things: look for better words, avoid repetition, etc.? Is that revision?

Well, that’s a part of revision called editing. It’s another important final step in polishing your work. But if you haven’t thought through your ideas, then rephrasing them won’t make any difference.

Why is revision important?

Writing is a process of discovery, and you don’t always produce your best stuff when you first get started. So revision is a chance for you to look critically at what you have written to see:

• if it’s really worth saying,
• if it says what you wanted to say, and
• if a reader will understand what you’re saying.

The process

What steps should i use when i begin to revise.

Here are several things to do. But don’t try them all at one time. Instead, focus on two or three main areas during each revision session:

• Wait awhile after you’ve finished a draft before looking at it again. The Roman poet Horace thought one should wait nine years, but that’s a bit much. A day—a few hours even—will work. When you do return to the draft, be honest with yourself, and don’t be lazy. Ask yourself what you really think about the paper.
• As The Scott, Foresman Handbook for Writers puts it, “THINK BIG, don’t tinker” (61). At this stage, you should be concerned with the large issues in the paper, not the commas.
• Check the focus of the paper: Is it appropriate to the assignment? Is the topic too big or too narrow? Do you stay on track through the entire paper?
• Think honestly about your thesis: Do you still agree with it? Should it be modified in light of something you discovered as you wrote the paper? Does it make a sophisticated, provocative point, or does it just say what anyone could say if given the same topic? Does your thesis generalize instead of taking a specific position? Should it be changed altogether? For more information visit our handout on thesis statements .
• Think about your purpose in writing: Does your introduction state clearly what you intend to do? Will your aims be clear to your readers?

What are some other steps I should consider in later stages of the revision process?

• Examine the balance within your paper: Are some parts out of proportion with others? Do you spend too much time on one trivial point and neglect a more important point? Do you give lots of detail early on and then let your points get thinner by the end?
• Check that you have kept your promises to your readers: Does your paper follow through on what the thesis promises? Do you support all the claims in your thesis? Are the tone and formality of the language appropriate for your audience?
• Check the organization: Does your paper follow a pattern that makes sense? Do the transitions move your readers smoothly from one point to the next? Do the topic sentences of each paragraph appropriately introduce what that paragraph is about? Would your paper work better if you moved some things around? For more information visit our handout on reorganizing drafts.
• Check your information: Are all your facts accurate? Are any of your statements misleading? Have you provided enough detail to satisfy readers’ curiosity? Have you cited all your information appropriately?
• Check your conclusion: Does the last paragraph tie the paper together smoothly and end on a stimulating note, or does the paper just die a slow, redundant, lame, or abrupt death?

Whoa! I thought I could just revise in a few minutes

Sorry. You may want to start working on your next paper early so that you have plenty of time for revising. That way you can give yourself some time to come back to look at what you’ve written with a fresh pair of eyes. It’s amazing how something that sounded brilliant the moment you wrote it can prove to be less-than-brilliant when you give it a chance to incubate.

But I don’t want to rewrite my whole paper!

Revision doesn’t necessarily mean rewriting the whole paper. Sometimes it means revising the thesis to match what you’ve discovered while writing. Sometimes it means coming up with stronger arguments to defend your position, or coming up with more vivid examples to illustrate your points. Sometimes it means shifting the order of your paper to help the reader follow your argument, or to change the emphasis of your points. Sometimes it means adding or deleting material for balance or emphasis. And then, sadly, sometimes revision does mean trashing your first draft and starting from scratch. Better that than having the teacher trash your final paper.

But I work so hard on what I write that I can’t afford to throw any of it away

If you want to be a polished writer, then you will eventually find out that you can’t afford NOT to throw stuff away. As writers, we often produce lots of material that needs to be tossed. The idea or metaphor or paragraph that I think is most wonderful and brilliant is often the very thing that confuses my reader or ruins the tone of my piece or interrupts the flow of my argument.Writers must be willing to sacrifice their favorite bits of writing for the good of the piece as a whole. In order to trim things down, though, you first have to have plenty of material on the page. One trick is not to hinder yourself while you are composing the first draft because the more you produce, the more you will have to work with when cutting time comes.

But sometimes I revise as I go

That’s OK. Since writing is a circular process, you don’t do everything in some specific order. Sometimes you write something and then tinker with it before moving on. But be warned: there are two potential problems with revising as you go. One is that if you revise only as you go along, you never get to think of the big picture. The key is still to give yourself enough time to look at the essay as a whole once you’ve finished. Another danger to revising as you go is that you may short-circuit your creativity. If you spend too much time tinkering with what is on the page, you may lose some of what hasn’t yet made it to the page. Here’s a tip: Don’t proofread as you go. You may waste time correcting the commas in a sentence that may end up being cut anyway.

How do I go about the process of revising? Any tips?

• Work from a printed copy; it’s easier on the eyes. Also, problems that seem invisible on the screen somehow tend to show up better on paper.
• Another tip is to read the paper out loud. That’s one way to see how well things flow.
• Remember all those questions listed above? Don’t try to tackle all of them in one draft. Pick a few “agendas” for each draft so that you won’t go mad trying to see, all at once, if you’ve done everything.
• Ask lots of questions and don’t flinch from answering them truthfully. For example, ask if there are opposing viewpoints that you haven’t considered yet.

Whenever I revise, I just make things worse. I do my best work without revising

That’s a common misconception that sometimes arises from fear, sometimes from laziness. The truth is, though, that except for those rare moments of inspiration or genius when the perfect ideas expressed in the perfect words in the perfect order flow gracefully and effortlessly from the mind, all experienced writers revise their work. I wrote six drafts of this handout. Hemingway rewrote the last page of A Farewell to Arms thirty-nine times. If you’re still not convinced, re-read some of your old papers. How do they sound now? What would you revise if you had a chance?

What can get in the way of good revision strategies?

Don’t fall in love with what you have written. If you do, you will be hesitant to change it even if you know it’s not great. Start out with a working thesis, and don’t act like you’re married to it. Instead, act like you’re dating it, seeing if you’re compatible, finding out what it’s like from day to day. If a better thesis comes along, let go of the old one. Also, don’t think of revision as just rewording. It is a chance to look at the entire paper, not just isolated words and sentences.

What happens if I find that I no longer agree with my own point?

If you take revision seriously, sometimes the process will lead you to questions you cannot answer, objections or exceptions to your thesis, cases that don’t fit, loose ends or contradictions that just won’t go away. If this happens (and it will if you think long enough), then you have several choices. You could choose to ignore the loose ends and hope your reader doesn’t notice them, but that’s risky. You could change your thesis completely to fit your new understanding of the issue, or you could adjust your thesis slightly to accommodate the new ideas. Or you could simply acknowledge the contradictions and show why your main point still holds up in spite of them. Most readers know there are no easy answers, so they may be annoyed if you give them a thesis and try to claim that it is always true with no exceptions no matter what.

How do I get really good at revising?

The same way you get really good at golf, piano, or a video game—do it often. Take revision seriously, be disciplined, and set high standards for yourself. Here are three more tips:

• The more you produce, the more you can cut.
• The more you can imagine yourself as a reader looking at this for the first time, the easier it will be to spot potential problems.
• The more you demand of yourself in terms of clarity and elegance, the more clear and elegant your writing will be.

How do I revise at the sentence level?

Read your paper out loud, sentence by sentence, and follow Peter Elbow’s advice: “Look for places where you stumble or get lost in the middle of a sentence. These are obvious awkwardness’s that need fixing. Look for places where you get distracted or even bored—where you cannot concentrate. These are places where you probably lost focus or concentration in your writing. Cut through the extra words or vagueness or digression; get back to the energy. Listen even for the tiniest jerk or stumble in your reading, the tiniest lessening of your energy or focus or concentration as you say the words . . . A sentence should be alive” (Writing with Power 135).

Practical advice for ensuring that your sentences are alive:

• Use forceful verbs—replace long verb phrases with a more specific verb. For example, replace “She argues for the importance of the idea” with “She defends the idea.”
• Look for places where you’ve used the same word or phrase twice or more in consecutive sentences and look for alternative ways to say the same thing OR for ways to combine the two sentences.
• Cut as many prepositional phrases as you can without losing your meaning. For instance, the following sentence, “There are several examples of the issue of integrity in Huck Finn,” would be much better this way, “Huck Finn repeatedly addresses the issue of integrity.”
• Check your sentence variety. If more than two sentences in a row start the same way (with a subject followed by a verb, for example), then try using a different sentence pattern.
• Aim for precision in word choice. Don’t settle for the best word you can think of at the moment—use a thesaurus (along with a dictionary) to search for the word that says exactly what you want to say.
• Look for sentences that start with “It is” or “There are” and see if you can revise them to be more active and engaging.
• For more information, please visit our handouts on word choice and style .

How can technology help?

Need some help revising? Take advantage of the revision and versioning features available in modern word processors.

Track your changes. Most word processors and writing tools include a feature that allows you to keep your changes visible until you’re ready to accept them. Using “Track Changes” mode in Word or “Suggesting” mode in Google Docs, for example, allows you to make changes without committing to them.

Compare drafts. Tools that allow you to compare multiple drafts give you the chance to visually track changes over time. Try “File History” or “Compare Documents” modes in Google Doc, Word, and Scrivener to retrieve old drafts, identify changes you’ve made over time, or help you keep a bigger picture in mind as you revise.

Works consulted

We consulted these works while writing this handout. This is not a comprehensive list of resources on the handout’s topic, and we encourage you to do your own research to find additional publications. Please do not use this list as a model for the format of your own reference list, as it may not match the citation style you are using. For guidance on formatting citations, please see the UNC Libraries citation tutorial . We revise these tips periodically and welcome feedback.

Anson, Chris M., and Robert A. Schwegler. 2010. The Longman Handbook for Writers and Readers , 6th ed. New York: Longman.

Elbow, Peter. 1998. Writing With Power: Techniques for Mastering the Writing Process . New York: Oxford University Press.

Lanham, Richard A. 2006. Revising Prose , 5th ed. New York: Pearson Longman.

Lunsford, Andrea A. 2015. The St. Martin’s Handbook , 8th ed. Boston: Bedford/St Martin’s.

Ruszkiewicz, John J., Christy Friend, Daniel Seward, and Maxine Hairston. 2010. The Scott, Foresman Handbook for Writers , 9th ed. Boston: Pearson Education.

Zinsser, William. 2001. On Writing Well: The Classic Guide to Writing Nonfiction , 6th ed. New York: Quill.

You may reproduce it for non-commercial use if you use the entire handout and attribute the source: The Writing Center, University of North Carolina at Chapel Hill

BibGuru Blog

Be more productive in school

• Citation Styles

Tips for revising a research paper

You’ve finished writing your research paper and you’re ready to revise, but where do you start? This post offers six tips for ensuring that your revision process goes smoothly.

1. Step away from your paper

It’s always best to take a break between writing your research paper and revising it. This enables you to approach your revision with fresh eyes. You’ll catch more errors when you’ve had time to step away from the paper.

2. Read your paper aloud

Reading your paper aloud, either to yourself or to someone else, is one of the best ways to check for major stylistic and structural issues. If you stumble over a sentence (or your audience looks confused), then you likely need to restructure or rephrase a sentence or paragraph.

3. Cut your paper up

To ensure that you’ve fully argued what you set out to prove in your thesis, try cutting your paper up into paragraphs or sections. Lay out the sections on a large table and then read through your paper, pausing to check that claims are backed up by adequate evidence and analysis and that you’ve signposted the various steps of your argument.

4. Ask a friend or classmate to read your paper

Many writing classes include peer review workshops during which you read another classmate’s paper. Even if you aren’t able to take part in a more formal peer review, you can ask a friend, classmate, or family member to read over your paper. Alternately, you can ask someone to read your paper aloud to you.

5. Know the difference between revising and proofreading

Revising and proofreading are not the same. Revision refers to substantive changes in the structure and argumentation of a research paper, while proofreading means checking a paper for surface-level mistakes in spelling, grammar, and punctuation.

It’s important to understand the difference between these two approaches. You will want to proofread your paper after you revise it and before you turn it in.

6. Check your citations

As part of the revision process, you should double-check your citations and bibliography. Have you remembered to cite all borrowed material ? Do your citations follow the correct style for the assignment?

If you haven’t compiled your final list of sources, you can use BibGuru's citation generator to create a bibliography, as well as in-text citations that you can copy to your document. Remember to consult your assignment guidelines, or your instructor, to find out what citation style is required for your research paper.

Frequently Asked Questions about revising a research paper

There are multiple methods that you can use to revise your research paper, including reading the paper aloud or asking a classmate to read it. No matter what method you decide on, make sure you take a break between writing and revision.

Revision is an essential step in the process of writing a research paper. It helps you correct mistakes in the overall structure and argumentation of your paper.

Revision often includes checking:

• the strength of your thesis (did you actually prove it?)
• overall organization (transitions, paragraph structure, etc.)
• evidence and analysis (do you have enough?)
• citations and bibliography

Revision refers to substantive changes in the structure and argumentation of a research paper, while proofreading means checking a paper for surface-level mistakes in spelling, grammar, and punctuation.

Like other parts of the research and writing process, your revision skills will improve with practice. Make an effort to always include dedicated time for revision, no matter what you’re writing.

Make your life easier with our productivity and writing resources.

For students and teachers.

Purdue Online Writing Lab Purdue OWL® College of Liberal Arts

Steps for Revising Your Paper

Welcome to the Purdue OWL

This page is brought to you by the OWL at Purdue University. When printing this page, you must include the entire legal notice.

Copyright ©1995-2018 by The Writing Lab & The OWL at Purdue and Purdue University. All rights reserved. This material may not be published, reproduced, broadcast, rewritten, or redistributed without permission. Use of this site constitutes acceptance of our terms and conditions of fair use.

When you have plenty of time to revise, use the time to work on your paper and to take breaks from writing. If you can forget about your draft for a day or two, you may return to it with a fresh outlook. During the revising process, put your writing aside at least twice—once during the first part of the process, when you are reorganizing your work, and once during the second part, when you are polishing and paying attention to details.

Use the following questions to evaluate your drafts. You can use your responses to revise your papers by reorganizing them to make your best points stand out, by adding needed information, by eliminating irrelevant information, and by clarifying sections or sentences.

Find your main point.

What are you trying to say in the paper? In other words, try to summarize your thesis, or main point, and the evidence you are using to support that point. Try to imagine that this paper belongs to someone else. Does the paper have a clear thesis? Do you know what the paper is going to be about?

Identify your readers and your purpose.

What are you trying to do in the paper? In other words, are you trying to argue with the reading, to analyze the reading, to evaluate the reading, to apply the reading to another situation, or to accomplish another goal?

Evaluate your evidence.

Does the body of your paper support your thesis? Do you offer enough evidence to support your claim? If you are using quotations from the text as evidence, did you cite them properly?

Save only the good pieces.

Do all of the ideas relate back to the thesis? Is there anything that doesn't seem to fit? If so, you either need to change your thesis to reflect the idea or cut the idea.

Tighten and clean up your language.

Do all of the ideas in the paper make sense? Are there unclear or confusing ideas or sentences? Read your paper out loud and listen for awkward pauses and unclear ideas. Cut out extra words, vagueness, and misused words.

Visit the Purdue OWL's vidcast on cutting during the revision phase for more help with this task.

Eliminate mistakes in grammar and usage.

Do you see any problems with grammar, punctuation, or spelling? If you think something is wrong, you should make a note of it, even if you don't know how to fix it. You can always talk to a Writing Lab tutor about how to correct errors.

Switch from writer-centered to reader-centered.

Try to detach yourself from what you've written; pretend that you are reviewing someone else's work. What would you say is the most successful part of your paper? Why? How could this part be made even better? What would you say is the least successful part of your paper? Why? How could this part be improved?

How to Revise and Edit a Research Paper

• Your introduction engages the reader and clearly presents a thesis that responds to your assignment.
• The body of your paper supports the thesis with laser-like focus.
• Your conclusion convinces your readers of the importance of what you wrote.

Revision often requires changing the structure of your work to achieve a more logical presentation, one that is more descriptive, or one that ensures you have met the parameters of your assignment. More than anything else, it requires that you check all the facts and quotations you used and ensure that you have cited them properly and have not plagiarized a writer.

Academic Writing, Editing, Proofreading, And Problem Solving Services

Get 10% off with 24start discount code, check each part of your research paper.

The first step in the revising and editing process is to start reading your draft from the beginning and make sure that each part—the introduction, body, and conclusion—does the job it’s supposed to do. For each part of your draft, ask yourself the questions on the following checklist. If your answer to any question is “no,” make the revisions necessary to change your answer to “yes.”

Check Your Introduction:

• Does your introduction capture your readers’ attention?
• Does your introduction contain a thesis statement that clearly states the main idea of your paper?

Check the Body of Your Paper:

• Does every paragraph in the body of your paper support your thesis statement?
• Does every paragraph state a main idea in a topic sentence?
• Does every sentence in each paragraph support the main idea of the paragraph?
• Have you taken out any information that is irrelevant, or beside the point?
• Do your paragraphs provide enough support for the main idea of your paper as it appears in your thesis statement?
• In every paragraph, do you provide enough support for the main idea expressed in its topic sentence?
• Do your paragraphs flow in a logical order?
• Do the sentences in each paragraph flow in a logical order?
• Have you used transitions?

Check Your Conclusion:

• Does your conclusion sum up the main points in your paper?
• Does your conclusion help readers answer the question, “So what?”

Your paper is really shaping up now. But a truly excellent research paper has to do even more than get a yes answer to every question in the preceding checklists. It needs to be well written. In other words, it has to sound good and be free of errors in spelling, grammar, and punctuation.

Spell Check

If you’re writing your paper on a computer, of course you can use the spell-checker function. That part of your word processing program picks up most spelling errors. But it doesn’t catch all of them. For example, if you’ve typed the word though incorrectly by leaving out the letter h at the beginning, the word comes out as tough. Your spell checker does not catch that as a mistake because tough is a word. So whether you work on a computer or not, be sure to read through your paper—word for word—to correct any spelling errors. If you aren’t sure how to spell a word, look it up.

Check Grammar and Punctuation

A good knowledge of the rules of language helps you make sure your paper is free of grammar and punctuation errors. You can use the following lists to help you avoid common errors. However, if you have specific questions about the rules of grammar, usage, and mechanics, your language arts textbook explains all of the rules and offers further examples.

Avoid Repetition

If you find that in your paper you have used the same word over and over, replace the repeated word with another one that has a similar meaning. Too much repetition makes writing sound boring. Another kind of repetition to avoid is using the same type of sentence too many times in a row. This can make writing sound boring, too. Varying your sentences makes your writing livelier and more interesting to readers.

Proofread Your Research Paper

After revising and editing your draft, put it away for a day or two—if you have time, of course. Then look at it again. Mistakes that you might have missed pop out at you after you and your paper have had a little vacation from each other. At this point, do your final fixes, making sure everything is as good as you can make it. If you’ve written your paper on a computer, print it out for proofreading. Often, writers see mistakes on paper that they miss on a computer screen. After you proofread, you can type in your corrections.

Another way to catch mistakes and to find areas that still need improvement is to read your work aloud to yourself. Hearing the words in your paper is a particularly good way to call attention to problems such as repetition, improper use of pronouns, and mistakes in subject-verb agreement.

Another good idea is to ask someone else to read your paper and give you feedback. A pair of eyes besides your own can pick up details that you may miss. Your reader, whether a classmate or an adult, should not change your paper. He or she should only suggest additional changes and improvements, which you can make yourself.

Avoiding Plagiarism

Plagiarism, in its most basic definition, means representing other people’s work and ideas as your own. Turning in a research paper that you borrowed, or stole from another student or downloaded from the Internet constitutes plagiarism. So does copying portions of text directly from your sources or from other texts you encountered in your research. It is a serious offense that, in school, can result in a range of penalties—from failing an assignment, earning a black mark on your academic record, to even being expelled. In the workplace, it can result in the loss of your professional reputation and the respect of your colleagues. It can affect your ability to earn promotions or find another job.

Plagiarism is not always deliberate. It can happen inadvertently when students do not understand how to properly present others’ work within their own papers. Even when you go to great lengths to write a paper, plagiarism can occur if you fail to properly cite the words and ideas of others. Plagiarism can happen if:

• You borrow short phrases from your research sources but fail to cite the source.
• You paraphrase an idea from your research using your own words but you fail to cite the original author.
• You represent another students’ work, even a short passage from it, as your own.
• You turn in a paper that you previously submitted as an assignment for another class. (Yes! It is possible to plagiarize yourself.)

More often than not, plagiarism results from a writer’s failure  to properly paraphrase or summarize another’s work or to correctly cite quoted material. Therefore, it is important to understand how to avoid plagiarism and to incorporate strategies for avoiding it in your writing routine. Plagiarism is easy to avoid if you have properly documented your research and if you follow the guidelines of an editorial style book, such as those published by the Modern Language Association (MLA) or the American Psychological Association (APA), to properly cite the research sources you documented.

Choosing a Documentation Style

“Style” refers to the way you present information and write what you have to say. Style guides prescribe conventions for writing and documenting your sources. Numerous styles abound.The three main styles are:

• MLA (Modern Language Association) style: used by the vast majority of high schools, colleges, and in literature, linguistics, and the humanities programs.
• APA (American Psychological Association) style: widely used in the scientific community. Most of example research papers on this site use APA style
• Chicago Manual of Style: typically used in books, magazines, corporate publications, and other popular outlets.

Styles aim to bring consistency to the way in which information is presented.They are designed to promote intellectual integrity and protect writers against plagiarism by specifying the ways in which information should be reported,quoted, paraphrased, and summarized.

In the vast majority of cases, students producing research papers will follow MLA style, although APA style is also used in the academic community.MLA style is widely used among high schools and in undergraduate courses at the college and university level. Straightforward and easy to master, MLA style was developed more than 50 years ago and is also widely used by collegiate presses and scholarly publications.

Upper-level and graduate-level science courses, and other disciplines that present findings in case studies, whitepapers, and reports, typically follow APA style. Your selection of style, however, should always be based upon what your teacher or professor assigns.

Learning the Basics

we review some of the basics of each style and provide a sample paper to illustrate basic MLA format.Students and serious researchers are advised to refer to the style guide of the association whose style they will follow.

Volumes have been published on the rules and recommendations of both styles. The MLA publishes the widely used  MLA Handbook for Writers of Research , as well as the  MLA Style Manual and Guide to Scholarly Publishing  which offers more detailed guidance for graduate theses, dissertations, and papers to be published in journals. The APA offers a variety of style guides, including  Mastering APA Style and the Publication Manual of the American Psychological Association , as well as extensive information online, including a narrated tutorial, at  www.apastyle.org .

Numerous online writing labs (OWLs) sponsored by university writing programs, such as the ones below, also provide extensive resources to help you brainstorm, outline, and write papers, as well as avoid plagiarism:

• Purdue University:  https://owl.english.purdue.edu/
• University of Wisconsin:  http://writing.wisc.edu/Handbook/Documentation.html
• University of North Carolina:  http://writingcenter.unc.edu/

Basic Formatting Guidelines

• Never submit a handwritten paper.
• Papers should be typewritten on plain white 8 1⁄2 x 11-inch paper.
• Use 1-inch margins on all sides.
• Double-space the paper.
• Text should be justified flush left, leaving the right-hand margin ragged.
• Create a header to run consecutively on all pages, flush right, one-half inch from the top of the page.
• Use quotation marks around the titles of articles and underline or italicize the titles of books and other long works.
• Avoid using all caps, underlining, or italics for emphasis.

Other formatting considerations are particular to the style you choose.

MLA Style Formatting Basics

• Include your name, your instructor’s name, the name of the course, and the date in the top left corner of the first page.
• Use a 12-point font that will be easy to read, such as Times New Roman or Arial.
• Use 1-inch margins for all sides of the paper—top and bottom, right and left.
• Create a header with your last name and the page number to appear in the upper right-hand corner of all other pages that follow the first page.
• Avoid separate title pages. Instead insert one blank line (no more) beneath the date and center the title.
• Never add blank lines or extra white space to the paper. Your teacher will suspect you are wasting space to fill a page requirement.
• Type the title in title case, capitalizing the initial letter of keywords.
• Center the title two lines under the header and just above the first line of text on the first page.
• Insert one blank line (no more) beneath the title and begin writing.Do not include extra white space above or below the title.
• Do not boldface or italicize the title and do not use special fonts.The title should be the same size and typeface as the rest of the paper.
• Justify your text flush left.
• Indent quoted excerpts by five spaces on the left and right-hand sides of the quoted text.
• Double space the entire essay including header information, your works cited page, and quoted excerpts.
• Be sure your works cited entries are formatted in the same style and size text as your paper.This is something you should especially watch if you used a citation generator; most produce the citation in their own fonts.
• Indent paragraphs five spaces, or 1⁄2 inch; do not add extra white space between paragraphs.
• Use one space after punctuation.

APA Style Formatting Basics

APA style was developed by social and behavioral scientists to govern the structure and presentation of scientific writing. Unlike MLA style, APA style calls for a separate title page and unique sections within the paper.The sections include:

• The title page
• An abstract summarizing the paper
• An introduction
• A description of the scientific methodology the researcher used
• A summary of the results
• A discussion of the issues

The references page is equivalent to the MLA’s works cited page. It is a list of the sources cited within the paper. As in MLA style, the referenced works should be alphabetized by author’s last name, listed separately, and formatted with hanging indents. Unlike MLA style, APA style makes liberal use of headings and uses five different levels of headings,each with unique formatting requirements. Check the APA Web site or style guide for details.When using APA style, remember to:

• Use a serif typeface, such as Times New Roman, for the text.
• Use a sans serif typeface, such as Arial, for headings.
• Create separate pages for the title page, abstract, the beginning of the text, references, and each appendix, figure, illustration, or table you use in the paper.
• Use captions with charts, tables, figures, illustrations, and other graphics.

Using Quotations/Citations

Any direct quotations or specific information you use from your sources must be attributed to your source, either by mentioning the author in the text or through an in-text citation. Quotation marks must appear around any words or phrases that appear exactly as they did in the original document. If you mention the author to introduce the quotation, you will need to follow it with a page citation to ensure that you avoid plagiarism, as shown in the example below:

Anne-Marie Minnow explained the importance of the Hadron supercollider as “an innovation that will advance scientific understanding by light-years.” (127)

If you do not include the author’s name in your text, you will need to incorporate the author’s last name in front of the page number in the citation, as shown in the example below:

The Hadron supercollider promises to be “an innovation that will advance scientific understanding by light-years.” (Minnow 127)

Note that the first example is a narrative reference in which the writer mentions the full name of the author in order to introduce, or set up, the quotation. In the second example, the citation follows the quotation to identify who the author is. In both cases, it is clear the words being quoted belong to Minnow and, in addition to using in-text citations like those shown above, you will need to cite the source on your works cited page.

Paraphrasing and Summarizing

Paraphrasing and summarizing are ways of discussing the work and ideas of others without quoting them directly. We summarize a discussion or reading to make it more succinct so that it can fit more neatly into our own discussion.We paraphrase a discussion in order to make it clearer or more relevant to our thesis and our audience. For all practical purposes, summary and paraphrase mean the same thing—using your own words to represent another’s ideas. It is equally as important to cite authors whose ideas you summarize or paraphrase as it is to cite those you quote.

Tips for Summarizing and Paraphrasing

• Whenever you summarize or paraphrase, write your understanding of the text you are summarizing. Avoid looking at the text as you do.This will help ensure that you do not inadvertently borrow the writer’s phrases. When you have finished, compare what you have written to the author’s words and correct any inaccuracies, again using your own words. If you used significant words or phrases from the original text, be sure to enclose them in quotation marks.
• As you incorporate your summaries and paraphrases into your paper, cite them as carefully as you cite quoted material.
• Be especially cautious when using word processing tools like Microsoft Word’s AutoSummarize. AutoSummarize shortens a page of text, highlighting key points and phrases that can be inserted into a research paper. Instructors are aware of these features, and many do not consider them legitimate. It is arguable, after all, whether this is you or the word processor doing the job. If you do use this feature, be sure that you edit the autosummary to quote the words and phrases that the word processor extracted from the original and be sure that you cite the source.
• Whenever you summarize or paraphrase, begin with a signal phrase to introduce the material. Be sure to cite the material as you would cite a quotation.

Now we came to the final part in writing.

Back to  How To Write A Research Paper .

ORDER HIGH QUALITY CUSTOM PAPER

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

12.2 Developing a Final Draft of a Research Paper

Learning objectives.

• Revise your paper to improve organization and cohesion.
• Determine an appropriate style and tone for your paper.
• Revise to ensure that your tone is consistent.
• Edit your paper to ensure that language, citations, and formatting are correct.

Given all the time and effort you have put into your research project, you will want to make sure that your final draft represents your best work. This requires taking the time to revise and edit your paper carefully.

You may feel like you need a break from your paper before you revise and edit it. That is understandable—but leave yourself with enough time to complete this important stage of the writing process. In this section, you will learn the following specific strategies that are useful for revising and editing a research paper:

• How to evaluate and improve the overall organization and cohesion
• How to maintain an appropriate style and tone
• How to use checklists to identify and correct any errors in language, citations, and formatting

Revising Your Paper: Organization and Cohesion

When writing a research paper, it is easy to become overly focused on editorial details, such as the proper format for bibliographical entries. These details do matter. However, before you begin to address them, it is important to spend time reviewing and revising the content of the paper.

A good research paper is both organized and cohesive. Organization means that your argument flows logically from one point to the next. Cohesion means that the elements of your paper work together smoothly and naturally. In a cohesive research paper, information from research is seamlessly integrated with the writer’s ideas.

Revise to Improve Organization

When you revise to improve organization, you look at the flow of ideas throughout the essay as a whole and within individual paragraphs. You check to see that your essay moves logically from the introduction to the body paragraphs to the conclusion, and that each section reinforces your thesis. Use Checklist 12.1 to help you.

Checklist 12.1

Revision: Organization

At the essay level

• Does my introduction proceed clearly from the opening to the thesis?
• Does each body paragraph have a clear main idea that relates to the thesis?
• Do the main ideas in the body paragraphs flow in a logical order? Is each paragraph connected to the one before it?
• Do I need to add or revise topic sentences or transitions to make the overall flow of ideas clearer?
• Does my conclusion summarize my main ideas and revisit my thesis?

At the paragraph level

• Does the topic sentence clearly state the main idea?
• Do the details in the paragraph relate to the main idea?
• Do I need to recast any sentences or add transitions to improve the flow of sentences?

Jorge reread his draft paragraph by paragraph. As he read, he highlighted the main idea of each paragraph so he could see whether his ideas proceeded in a logical order. For the most part, the flow of ideas was clear. However, he did notice that one paragraph did not have a clear main idea. It interrupted the flow of the writing. During revision, Jorge added a topic sentence that clearly connected the paragraph to the one that had preceded it. He also added transitions to improve the flow of ideas from sentence to sentence.

Read the following paragraphs twice, the first time without Jorge’s changes, and the second time with them.

Follow these steps to begin revising your paper’s overall organization.

• Print out a hard copy of your paper.
• Read your paper paragraph by paragraph. Highlight your thesis and the topic sentence of each paragraph.
• Using the thesis and topic sentences as starting points, outline the ideas you presented—just as you would do if you were outlining a chapter in a textbook. Do not look at the outline you created during prewriting. You may write in the margins of your draft or create a formal outline on a separate sheet of paper.
• Next, reread your paper more slowly, looking for how ideas flow from sentence to sentence. Identify places where adding a transition or recasting a sentence would make the ideas flow more logically.
• Review the topics on your outline. Is there a logical flow of ideas? Identify any places where you may need to reorganize ideas.
• Begin to revise your paper to improve organization. Start with any major issues, such as needing to move an entire paragraph. Then proceed to minor revisions, such as adding a transitional phrase or tweaking a topic sentence so it connects ideas more clearly.

Collaboration

Please share your paper with a classmate. Repeat the six steps and take notes on a separate piece of paper. Share and compare notes.

Writers choose transitions carefully to show the relationships between ideas—for instance, to make a comparison or elaborate on a point with examples. Make sure your transitions suit your purpose and avoid overusing the same ones. For an extensive list of transitions, see Chapter 8 “The Writing Process: How Do I Begin?” , Section 8.4 “Revising and Editing” .

Revise to Improve Cohesion

When you revise to improve cohesion, you analyze how the parts of your paper work together. You look for anything that seems awkward or out of place. Revision may involve deleting unnecessary material or rewriting parts of the paper so that the out-of-place material fits in smoothly.

In a research paper, problems with cohesion usually occur when a writer has trouble integrating source material. If facts or quotations have been awkwardly dropped into a paragraph, they distract or confuse the reader instead of working to support the writer’s point. Overusing paraphrased and quoted material has the same effect. Use Checklist 12.2 to review your essay for cohesion.

Checklist 12.2

Revision: Cohesion

• Does the opening of the paper clearly connect to the broader topic and thesis? Make sure entertaining quotes or anecdotes serve a purpose.
• Have I included support from research for each main point in the body of my paper?
• Have I included introductory material before any quotations? Quotations should never stand alone in a paragraph.
• Does paraphrased and quoted material clearly serve to develop my own points?
• Do I need to add to or revise parts of the paper to help the reader understand how certain information from a source is relevant?
• Are there any places where I have overused material from sources?
• Does my conclusion make sense based on the rest of the paper? Make sure any new questions or suggestions in the conclusion are clearly linked to earlier material.

As Jorge reread his draft, he looked to see how the different pieces fit together to prove his thesis. He realized that some of his supporting information needed to be integrated more carefully and decided to omit some details entirely. Read the following paragraph, first without Jorge’s revisions and then with them.

Jorge decided that his comment about pizza and birthday cake came across as subjective and was not necessary to make his point, so he deleted it. He also realized that the quotation at the end of the paragraph was awkward and ineffective. How would his readers know who Kwon was or why her opinion should be taken seriously? Adding an introductory phrase helped Jorge integrate this quotation smoothly and establish the credibility of his source.

Follow these steps to begin revising your paper to improve cohesion.

• Print out a hard copy of your paper, or work with your printout from Note 12.33 “Exercise 1” .
• Read the body paragraphs of your paper first. Each time you come to a place that cites information from sources, ask yourself what purpose this information serves. Check that it helps support a point and that it is clearly related to the other sentences in the paragraph.
• Identify unnecessary information from sources that you can delete.
• Identify places where you need to revise your writing so that readers understand the significance of the details cited from sources.
• Skim the body paragraphs once more, looking for any paragraphs that seem packed with citations. Review these paragraphs carefully for cohesion.
• Review your introduction and conclusion. Make sure the information presented works with ideas in the body of the paper.
• Revise the places you identified in your paper to improve cohesion.

Please exchange papers with a classmate. Complete step four. On a separate piece of paper, note any areas that would benefit from clarification. Return and compare notes.

Writing at Work

Understanding cohesion can also benefit you in the workplace, especially when you have to write and deliver a presentation. Speakers sometimes rely on cute graphics or funny quotations to hold their audience’s attention. If you choose to use these elements, make sure they work well with the substantive content of your presentation. For example, if you are asked to give a financial presentation, and the financial report shows that the company lost money, funny illustrations would not be relevant or appropriate for the presentation.

Using a Consistent Style and Tone

Once you are certain that the content of your paper fulfills your purpose, you can begin revising to improve style and tone . Together, your style and tone create the voice of your paper, or how you come across to readers. Style refers to the way you use language as a writer—the sentence structures you use and the word choices you make. Tone is the attitude toward your subject and audience that you convey through your word choice.

Determining an Appropriate Style and Tone

Although accepted writing styles will vary within different disciplines, the underlying goal is the same—to come across to your readers as a knowledgeable, authoritative guide. Writing about research is like being a tour guide who walks readers through a topic. A stuffy, overly formal tour guide can make readers feel put off or intimidated. Too much informality or humor can make readers wonder whether the tour guide really knows what he or she is talking about. Extreme or emotionally charged language comes across as unbalanced.

To help prevent being overly formal or informal, determine an appropriate style and tone at the beginning of the research process. Consider your topic and audience because these can help dictate style and tone. For example, a paper on new breakthroughs in cancer research should be more formal than a paper on ways to get a good night’s sleep.

A strong research paper comes across as straightforward, appropriately academic, and serious. It is generally best to avoid writing in the first person, as this can make your paper seem overly subjective and opinion based. Use Checklist 12.3 on style to review your paper for other issues that affect style and tone. You can check for consistency at the end of the writing process. Checking for consistency is discussed later in this section.

Checklist 12.3

• My paper avoids excessive wordiness.
• My sentences are varied in length and structure.
• I have avoided using first-person pronouns such as I and we .
• I have used the active voice whenever possible.
• I have defined specialized terms that might be unfamiliar to readers.
• I have used clear, straightforward language whenever possible and avoided unnecessary jargon.
• My paper states my point of view using a balanced tone—neither too indecisive nor too forceful.

Word Choice

Note that word choice is an especially important aspect of style. In addition to checking the points noted on Checklist 12.3, review your paper to make sure your language is precise, conveys no unintended connotations, and is free of biases. Here are some of the points to check for:

• Vague or imprecise terms
• Repetition of the same phrases (“Smith states…, Jones states…”) to introduce quoted and paraphrased material (For a full list of strong verbs to use with in-text citations, see Chapter 13 “APA and MLA Documentation and Formatting” .)
• Exclusive use of masculine pronouns or awkward use of he or she
• Use of language with negative connotations, such as haughty or ridiculous
• Use of outdated or offensive terms to refer to specific ethnic, racial, or religious groups

Using plural nouns and pronouns or recasting a sentence can help you keep your language gender neutral while avoiding awkwardness. Consider the following examples.

• Gender-biased: When a writer cites a source in the body of his paper, he must list it on his references page.
• Awkward: When a writer cites a source in the body of his or her paper, he or she must list it on his or her references page.
• Improved: Writers must list any sources cited in the body of a paper on the references page.

Keeping Your Style Consistent

As you revise your paper, make sure your style is consistent throughout. Look for instances where a word, phrase, or sentence just does not seem to fit with the rest of the writing. It is best to reread for style after you have completed the other revisions so that you are not distracted by any larger content issues. Revising strategies you can use include the following:

• Read your paper aloud. Sometimes your ears catch inconsistencies that your eyes miss.
• Share your paper with another reader whom you trust to give you honest feedback. It is often difficult to evaluate one’s own style objectively—especially in the final phase of a challenging writing project. Another reader may be more likely to notice instances of wordiness, confusing language, or other issues that affect style and tone.
• Line-edit your paper slowly, sentence by sentence. You may even wish to use a sheet of paper to cover everything on the page except the paragraph you are editing—that forces you to read slowly and carefully. Mark any areas where you notice problems in style or tone, and then take time to rework those sections.

On reviewing his paper, Jorge found that he had generally used an appropriately academic style and tone. However, he noticed one glaring exception—his first paragraph. He realized there were places where his overly informal writing could come across as unserious or, worse, disparaging. Revising his word choice and omitting a humorous aside helped Jorge maintain a consistent tone. Read his revisions.

Using Checklist 12.3, line-edit your paper. You may use either of these techniques:

• Print out a hard copy of your paper, or work with your printout from Note 12.33 “Exercise 1” . Read it line by line. Check for the issues noted on Checklist 12.3, as well as any other aspects of your writing style you have previously identified as areas for improvement. Mark any areas where you notice problems in style or tone, and then take time to rework those sections.
• If you prefer to work with an electronic document, use the menu options in your word-processing program to enlarge the text to 150 or 200 percent of the original size. Make sure the type is large enough that you can focus on only one paragraph at a time. Read the paper line by line as described in step 1. Highlight any areas where you notice problems in style or tone, and then take time to rework those sections.

Please exchange papers with a classmate. On a separate piece of paper, note places where the essay does not seem to flow or you have questions about what was written. Return the essay and compare notes.

Editing Your Paper

After revising your paper to address problems in content or style, you will complete one final editorial review. Perhaps you already have caught and corrected minor mistakes during previous revisions. Nevertheless, give your draft a final edit to make sure it is error-free. Your final edit should focus on two broad areas:

• Errors in grammar, mechanics, usage, and spelling
• Errors in citing and formatting sources

For in-depth information on these two topics, see Chapter 2 “Writing Basics: What Makes a Good Sentence?” and Chapter 13 “APA and MLA Documentation and Formatting” .

Correcting Errors

Given how much work you have put into your research paper, you will want to check for any errors that could distract or confuse your readers. Using the spell-checking feature in your word-processing program can be helpful—but this should not replace a full, careful review of your document. Be sure to check for any errors that may have come up frequently for you in the past. Use Checklist 12.4 to help you as you edit:

Checklist 12.4

Grammar, Mechanics, Punctuation, Usage, and Spelling

• My paper is free of grammatical errors, such as errors in subject-verb agreement and sentence fragments. (For additional guidance on grammar, see Chapter 2 “Writing Basics: What Makes a Good Sentence?” .)
• My paper is free of errors in punctuation and mechanics, such as misplaced commas or incorrectly formatted source titles. (For additional guidance on punctuation and mechanics, see Chapter 3 “Punctuation” .)
• My paper is free of common usage errors, such as alot and alright . (For additional guidance on correct usage, see Chapter 4 “Working with Words: Which Word Is Right?” .)
• My paper is free of spelling errors. I have proofread my paper for spelling in addition to using the spell-checking feature in my word-processing program.
• I have checked my paper for any editing errors that I know I tend to make frequently.

Checking Citations and Formatting

When editing a research paper, it is also important to check that you have cited sources properly and formatted your document according to the specified guidelines. There are two reasons for this. First and foremost, citing sources correctly ensures that you have given proper credit to other people for ideas and information that helped you in your work. Second, using correct formatting establishes your paper as one student’s contribution to the work developed by and for a larger academic community. Increasingly, American Psychological Association (APA) style guidelines are the standard for many academic fields. Modern Language Association (MLA) is also a standard style in many fields. Use Checklist 12.5 to help you check citations and formatting.

Checklist 12.5

Citations and Formatting

• Within the body of my paper, each fact or idea taken from a source is credited to the correct source.
• Each in-text citation includes the source author’s name (or, where applicable, the organization name or source title) and year of publication. I have used the correct format of in-text and parenthetical citations.
• Each source cited in the body of my paper has a corresponding entry in the references section of my paper.
• My references section includes a heading and double-spaced, alphabetized entries.
• Each entry in my references section is indented on the second line and all subsequent lines.
• Each entry in my references section includes all the necessary information for that source type, in the correct sequence and format.
• My paper includes a title page.
• My paper includes a running head.
• The margins of my paper are set at one inch. Text is double spaced and set in a standard 12-point font.

For detailed guidelines on APA and MLA citation and formatting, see Chapter 13 “APA and MLA Documentation and Formatting” .

Following APA or MLA citation and formatting guidelines may require time and effort. However, it is good practice for learning how to follow accepted conventions in any professional field. Many large corporations create a style manual with guidelines for editing and formatting documents produced by that corporation. Employees follow the style manual when creating internal documents and documents for publication.

During the process of revising and editing, Jorge made changes in the content and style of his paper. He also gave the paper a final review to check for overall correctness and, particularly, correct APA or MLA citations and formatting. Read the final draft of his paper.

Key Takeaways

• Organization in a research paper means that the argument proceeds logically from the introduction to the body to the conclusion. It flows logically from one point to the next. When revising a research paper, evaluate the organization of the paper as a whole and the organization of individual paragraphs.
• In a cohesive research paper, the elements of the paper work together smoothly and naturally. When revising a research paper, evaluate its cohesion. In particular, check that information from research is smoothly integrated with your ideas.
• An effective research paper uses a style and tone that are appropriately academic and serious. When revising a research paper, check that the style and tone are consistent throughout.
• Editing a research paper involves checking for errors in grammar, mechanics, punctuation, usage, spelling, citations, and formatting.

Writing for Success Copyright © 2015 by University of Minnesota is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.