article dissertation thesis

How To Write A Dissertation Or Thesis

8 straightforward steps to craft an a-grade dissertation.

By: Derek Jansen (MBA) Expert Reviewed By: Dr Eunice Rautenbach | June 2020

Writing a dissertation or thesis is not a simple task. It takes time, energy and a lot of will power to get you across the finish line. It’s not easy – but it doesn’t necessarily need to be a painful process. If you understand the big-picture process of how to write a dissertation or thesis, your research journey will be a lot smoother.  

In this post, I’m going to outline the big-picture process of how to write a high-quality dissertation or thesis, without losing your mind along the way. If you’re just starting your research, this post is perfect for you. Alternatively, if you’ve already submitted your proposal, this article which covers how to structure a dissertation might be more helpful.

How To Write A Dissertation: 8 Steps

• Clearly understand what a dissertation (or thesis) is
• Find a unique and valuable research topic
• Craft a convincing research proposal
• Write up a strong introduction chapter
• Review the existing literature and compile a literature review
• Design a rigorous research strategy and undertake your own research
• Present the findings of your research
• Draw a conclusion and discuss the implications

Step 1: Understand exactly what a dissertation is

This probably sounds like a no-brainer, but all too often, students come to us for help with their research and the underlying issue is that they don’t fully understand what a dissertation (or thesis) actually is.

So, what is a dissertation?

At its simplest, a dissertation or thesis is a formal piece of research , reflecting the standard research process . But what is the standard research process, you ask? The research process involves 4 key steps:

• Ask a very specific, well-articulated question (s) (your research topic)
• See what other researchers have said about it (if they’ve already answered it)
• If they haven’t answered it adequately, undertake your own data collection and analysis in a scientifically rigorous fashion
• Answer your original question(s), based on your analysis findings

In short, the research process is simply about asking and answering questions in a systematic fashion . This probably sounds pretty obvious, but people often think they’ve done “research”, when in fact what they have done is:

• Started with a vague, poorly articulated question
• Not taken the time to see what research has already been done regarding the question
• Collected data and opinions that support their gut and undertaken a flimsy analysis
• Drawn a shaky conclusion, based on that analysis

If you want to see the perfect example of this in action, look out for the next Facebook post where someone claims they’ve done “research”… All too often, people consider reading a few blog posts to constitute research. Its no surprise then that what they end up with is an opinion piece, not research. Okay, okay – I’ll climb off my soapbox now.

The key takeaway here is that a dissertation (or thesis) is a formal piece of research, reflecting the research process. It’s not an opinion piece , nor a place to push your agenda or try to convince someone of your position. Writing a good dissertation involves asking a question and taking a systematic, rigorous approach to answering it.

If you understand this and are comfortable leaving your opinions or preconceived ideas at the door, you’re already off to a good start!

Step 2: Find a unique, valuable research topic

As we saw, the first step of the research process is to ask a specific, well-articulated question. In other words, you need to find a research topic that asks a specific question or set of questions (these are called research questions ). Sounds easy enough, right? All you’ve got to do is identify a question or two and you’ve got a winning research topic. Well, not quite…

A good dissertation or thesis topic has a few important attributes. Specifically, a solid research topic should be:

Let’s take a closer look at these:

Attribute #1: Clear

Your research topic needs to be crystal clear about what you’re planning to research, what you want to know, and within what context. There shouldn’t be any ambiguity or vagueness about what you’ll research.

Here’s an example of a clearly articulated research topic:

An analysis of consumer-based factors influencing organisational trust in British low-cost online equity brokerage firms.

As you can see in the example, its crystal clear what will be analysed (factors impacting organisational trust), amongst who (consumers) and in what context (British low-cost equity brokerage firms, based online).

Need a helping hand?

Attribute #2:   Unique

Your research should be asking a question(s) that hasn’t been asked before, or that hasn’t been asked in a specific context (for example, in a specific country or industry).

For example, sticking organisational trust topic above, it’s quite likely that organisational trust factors in the UK have been investigated before, but the context (online low-cost equity brokerages) could make this research unique. Therefore, the context makes this research original.

One caveat when using context as the basis for originality – you need to have a good reason to suspect that your findings in this context might be different from the existing research – otherwise, there’s no reason to warrant researching it.

Attribute #3: Important

Simply asking a unique or original question is not enough – the question needs to create value. In other words, successfully answering your research questions should provide some value to the field of research or the industry. You can’t research something just to satisfy your curiosity. It needs to make some form of contribution either to research or industry.

For example, researching the factors influencing consumer trust would create value by enabling businesses to tailor their operations and marketing to leverage factors that promote trust. In other words, it would have a clear benefit to industry.

So, how do you go about finding a unique and valuable research topic? We explain that in detail in this video post – How To Find A Research Topic . Yeah, we’ve got you covered 😊

Step 3: Write a convincing research proposal

Once you’ve pinned down a high-quality research topic, the next step is to convince your university to let you research it. No matter how awesome you think your topic is, it still needs to get the rubber stamp before you can move forward with your research. The research proposal is the tool you’ll use for this job.

So, what’s in a research proposal?

The main “job” of a research proposal is to convince your university, advisor or committee that your research topic is worthy of approval. But convince them of what? Well, this varies from university to university, but generally, they want to see that:

• You have a clearly articulated, unique and important topic (this might sound familiar…)
• You’ve done some initial reading of the existing literature relevant to your topic (i.e. a literature review)
• You have a provisional plan in terms of how you will collect data and analyse it (i.e. a methodology)

At the proposal stage, it’s (generally) not expected that you’ve extensively reviewed the existing literature , but you will need to show that you’ve done enough reading to identify a clear gap for original (unique) research. Similarly, they generally don’t expect that you have a rock-solid research methodology mapped out, but you should have an idea of whether you’ll be undertaking qualitative or quantitative analysis , and how you’ll collect your data (we’ll discuss this in more detail later).

Long story short – don’t stress about having every detail of your research meticulously thought out at the proposal stage – this will develop as you progress through your research. However, you do need to show that you’ve “done your homework” and that your research is worthy of approval .

So, how do you go about crafting a high-quality, convincing proposal? We cover that in detail in this video post – How To Write A Top-Class Research Proposal . We’ve also got a video walkthrough of two proposal examples here .

Step 4: Craft a strong introduction chapter

Once your proposal’s been approved, its time to get writing your actual dissertation or thesis! The good news is that if you put the time into crafting a high-quality proposal, you’ve already got a head start on your first three chapters – introduction, literature review and methodology – as you can use your proposal as the basis for these.

Handy sidenote – our free dissertation & thesis template is a great way to speed up your dissertation writing journey.

What’s the introduction chapter all about?

The purpose of the introduction chapter is to set the scene for your research (dare I say, to introduce it…) so that the reader understands what you’ll be researching and why it’s important. In other words, it covers the same ground as the research proposal in that it justifies your research topic.

What goes into the introduction chapter?

This can vary slightly between universities and degrees, but generally, the introduction chapter will include the following:

• A brief background to the study, explaining the overall area of research
• A problem statement , explaining what the problem is with the current state of research (in other words, where the knowledge gap exists)
• Your research questions – in other words, the specific questions your study will seek to answer (based on the knowledge gap)
• The significance of your study – in other words, why it’s important and how its findings will be useful in the world

As you can see, this all about explaining the “what” and the “why” of your research (as opposed to the “how”). So, your introduction chapter is basically the salesman of your study, “selling” your research to the first-time reader and (hopefully) getting them interested to read more.

How do I write the introduction chapter, you ask? We cover that in detail in this post .

Step 5: Undertake an in-depth literature review

As I mentioned earlier, you’ll need to do some initial review of the literature in Steps 2 and 3 to find your research gap and craft a convincing research proposal – but that’s just scratching the surface. Once you reach the literature review stage of your dissertation or thesis, you need to dig a lot deeper into the existing research and write up a comprehensive literature review chapter.

What’s the literature review all about?

There are two main stages in the literature review process:

Literature Review Step 1: Reading up

The first stage is for you to deep dive into the existing literature (journal articles, textbook chapters, industry reports, etc) to gain an in-depth understanding of the current state of research regarding your topic. While you don’t need to read every single article, you do need to ensure that you cover all literature that is related to your core research questions, and create a comprehensive catalogue of that literature , which you’ll use in the next step.

Reading and digesting all the relevant literature is a time consuming and intellectually demanding process. Many students underestimate just how much work goes into this step, so make sure that you allocate a good amount of time for this when planning out your research. Thankfully, there are ways to fast track the process – be sure to check out this article covering how to read journal articles quickly .

Literature Review Step 2: Writing up

Once you’ve worked through the literature and digested it all, you’ll need to write up your literature review chapter. Many students make the mistake of thinking that the literature review chapter is simply a summary of what other researchers have said. While this is partly true, a literature review is much more than just a summary. To pull off a good literature review chapter, you’ll need to achieve at least 3 things:

• You need to synthesise the existing research , not just summarise it. In other words, you need to show how different pieces of theory fit together, what’s agreed on by researchers, what’s not.
• You need to highlight a research gap that your research is going to fill. In other words, you’ve got to outline the problem so that your research topic can provide a solution.
• You need to use the existing research to inform your methodology and approach to your own research design. For example, you might use questions or Likert scales from previous studies in your your own survey design .

As you can see, a good literature review is more than just a summary of the published research. It’s the foundation on which your own research is built, so it deserves a lot of love and attention. Take the time to craft a comprehensive literature review with a suitable structure .

But, how do I actually write the literature review chapter, you ask? We cover that in detail in this video post .

Step 6: Carry out your own research

Once you’ve completed your literature review and have a sound understanding of the existing research, its time to develop your own research (finally!). You’ll design this research specifically so that you can find the answers to your unique research question.

There are two steps here – designing your research strategy and executing on it:

1 – Design your research strategy

The first step is to design your research strategy and craft a methodology chapter . I won’t get into the technicalities of the methodology chapter here, but in simple terms, this chapter is about explaining the “how” of your research. If you recall, the introduction and literature review chapters discussed the “what” and the “why”, so it makes sense that the next point to cover is the “how” –that’s what the methodology chapter is all about.

In this section, you’ll need to make firm decisions about your research design. This includes things like:

• Your research philosophy (e.g. positivism or interpretivism )
• Your overall methodology (e.g. qualitative , quantitative or mixed methods)
• Your data collection strategy (e.g. interviews , focus groups, surveys)
• Your data analysis strategy (e.g. content analysis , correlation analysis, regression)

If these words have got your head spinning, don’t worry! We’ll explain these in plain language in other posts. It’s not essential that you understand the intricacies of research design (yet!). The key takeaway here is that you’ll need to make decisions about how you’ll design your own research, and you’ll need to describe (and justify) your decisions in your methodology chapter.

2 – Execute: Collect and analyse your data

Once you’ve worked out your research design, you’ll put it into action and start collecting your data. This might mean undertaking interviews, hosting an online survey or any other data collection method. Data collection can take quite a bit of time (especially if you host in-person interviews), so be sure to factor sufficient time into your project plan for this. Oftentimes, things don’t go 100% to plan (for example, you don’t get as many survey responses as you hoped for), so bake a little extra time into your budget here.

Once you’ve collected your data, you’ll need to do some data preparation before you can sink your teeth into the analysis. For example:

• If you carry out interviews or focus groups, you’ll need to transcribe your audio data to text (i.e. a Word document).
• If you collect quantitative survey data, you’ll need to clean up your data and get it into the right format for whichever analysis software you use (for example, SPSS, R or STATA).

Once you’ve completed your data prep, you’ll undertake your analysis, using the techniques that you described in your methodology. Depending on what you find in your analysis, you might also do some additional forms of analysis that you hadn’t planned for. For example, you might see something in the data that raises new questions or that requires clarification with further analysis.

The type(s) of analysis that you’ll use depend entirely on the nature of your research and your research questions. For example:

• If your research if exploratory in nature, you’ll often use qualitative analysis techniques .
• If your research is confirmatory in nature, you’ll often use quantitative analysis techniques
• If your research involves a mix of both, you might use a mixed methods approach

Again, if these words have got your head spinning, don’t worry! We’ll explain these concepts and techniques in other posts. The key takeaway is simply that there’s no “one size fits all” for research design and methodology – it all depends on your topic, your research questions and your data. So, don’t be surprised if your study colleagues take a completely different approach to yours.

Step 7: Present your findings

Once you’ve completed your analysis, it’s time to present your findings (finally!). In a dissertation or thesis, you’ll typically present your findings in two chapters – the results chapter and the discussion chapter .

What’s the difference between the results chapter and the discussion chapter?

While these two chapters are similar, the results chapter generally just presents the processed data neatly and clearly without interpretation, while the discussion chapter explains the story the data are telling  – in other words, it provides your interpretation of the results.

For example, if you were researching the factors that influence consumer trust, you might have used a quantitative approach to identify the relationship between potential factors (e.g. perceived integrity and competence of the organisation) and consumer trust. In this case:

• Your results chapter would just present the results of the statistical tests. For example, correlation results or differences between groups. In other words, the processed numbers.
• Your discussion chapter would explain what the numbers mean in relation to your research question(s). For example, Factor 1 has a weak relationship with consumer trust, while Factor 2 has a strong relationship.

Depending on the university and degree, these two chapters (results and discussion) are sometimes merged into one , so be sure to check with your institution what their preference is. Regardless of the chapter structure, this section is about presenting the findings of your research in a clear, easy to understand fashion.

Importantly, your discussion here needs to link back to your research questions (which you outlined in the introduction or literature review chapter). In other words, it needs to answer the key questions you asked (or at least attempt to answer them).

For example, if we look at the sample research topic:

In this case, the discussion section would clearly outline which factors seem to have a noteworthy influence on organisational trust. By doing so, they are answering the overarching question and fulfilling the purpose of the research .

For more information about the results chapter , check out this post for qualitative studies and this post for quantitative studies .

Step 8: The Final Step Draw a conclusion and discuss the implications

Last but not least, you’ll need to wrap up your research with the conclusion chapter . In this chapter, you’ll bring your research full circle by highlighting the key findings of your study and explaining what the implications of these findings are.

What exactly are key findings? The key findings are those findings which directly relate to your original research questions and overall research objectives (which you discussed in your introduction chapter). The implications, on the other hand, explain what your findings mean for industry, or for research in your area.

Sticking with the consumer trust topic example, the conclusion might look something like this:

Key findings

This study set out to identify which factors influence consumer-based trust in British low-cost online equity brokerage firms. The results suggest that the following factors have a large impact on consumer trust:

While the following factors have a very limited impact on consumer trust:

Notably, within the 25-30 age groups, Factors E had a noticeably larger impact, which may be explained by…

Implications

The findings having noteworthy implications for British low-cost online equity brokers. Specifically:

The large impact of Factors X and Y implies that brokers need to consider….

The limited impact of Factor E implies that brokers need to…

As you can see, the conclusion chapter is basically explaining the “what” (what your study found) and the “so what?” (what the findings mean for the industry or research). This brings the study full circle and closes off the document.

Let’s recap – how to write a dissertation or thesis

You’re still with me? Impressive! I know that this post was a long one, but hopefully you’ve learnt a thing or two about how to write a dissertation or thesis, and are now better equipped to start your own research.

To recap, the 8 steps to writing a quality dissertation (or thesis) are as follows:

• Understand what a dissertation (or thesis) is – a research project that follows the research process.
• Find a unique (original) and important research topic
• Craft a convincing dissertation or thesis research proposal
• Write a clear, compelling introduction chapter
• Undertake a thorough review of the existing research and write up a literature review
• Undertake your own research
• Present and interpret your findings

Once you’ve wrapped up the core chapters, all that’s typically left is the abstract , reference list and appendices. As always, be sure to check with your university if they have any additional requirements in terms of structure or content.  

Psst... there’s more!

This post was based on one of our popular Research Bootcamps . If you're working on a research project, you'll definitely want to check this out ...

20 Comments

thankfull >>>this is very useful

Thank you, it was really helpful

unquestionably, this amazing simplified way of teaching. Really , I couldn’t find in the literature words that fully explicit my great thanks to you. However, I could only say thanks a-lot.

Great to hear that – thanks for the feedback. Good luck writing your dissertation/thesis.

This is the most comprehensive explanation of how to write a dissertation. Many thanks for sharing it free of charge.

Very rich presentation. Thank you

Thanks Derek Jansen|GRADCOACH, I find it very useful guide to arrange my activities and proceed to research!

Thank you so much for such a marvelous teaching .I am so convinced that am going to write a comprehensive and a distinct masters dissertation

It is an amazing comprehensive explanation

This was straightforward. Thank you!

I can say that your explanations are simple and enlightening – understanding what you have done here is easy for me. Could you write more about the different types of research methods specific to the three methodologies: quan, qual and MM. I look forward to interacting with this website more in the future.

Thanks for the feedback and suggestions 🙂

Hello, your write ups is quite educative. However, l have challenges in going about my research questions which is below; *Building the enablers of organisational growth through effective governance and purposeful leadership.*

Very educating.

Just listening to the name of the dissertation makes the student nervous. As writing a top-quality dissertation is a difficult task as it is a lengthy topic, requires a lot of research and understanding and is usually around 10,000 to 15000 words. Sometimes due to studies, unbalanced workload or lack of research and writing skill students look for dissertation submission from professional writers.

Thank you 💕😊 very much. I was confused but your comprehensive explanation has cleared my doubts of ever presenting a good thesis. Thank you.

thank you so much, that was so useful

Hi. Where is the excel spread sheet ark?

could you please help me look at your thesis paper to enable me to do the portion that has to do with the specification

my topic is “the impact of domestic revenue mobilization.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Print Friendly

Adapting a Dissertation or Thesis Into a Journal Article

Dissertations or theses are typically required of graduate students. Undergraduate students completing advanced research projects may also write senior theses or similar types of papers. Once completed, the dissertation or thesis is often submitted (with modifications) as a manuscript for publication in a scholarly journal. Thus, the dissertation or thesis often provides the foundation for a new researcher’s body of published work.

Writers will first want to determine whether the work in their dissertation or thesis merits publication. If it does, we then provide guidance on how to adapt a dissertation or thesis for submission to a journal.

Adapting a dissertation or thesis into a journal article is covered in the seventh edition APA Style Publication Manual in Section 12.1

Deciding to submit a dissertation or thesis for publication

When deciding whether to publish the work in your dissertation or thesis, first consider whether the findings tell a compelling story or answer important questions. Whereas dissertations and theses may present existing knowledge in conjunction with new work, published research should make a novel contribution to the literature. For example, some of your original research questions might be suitable for publication, and others may have been sufficiently addressed in the literature already. Likewise, some of your results may warrant additional experiments or analyses that could help answer the research questions more fully, and you may want to conduct these analyses before seeking publication.

You may also want to consider such factors as whether the current sample size provides sufficient power to adequately inform the analyses and whether additional analyses might clarify ambiguous findings. Consultation with colleagues can help evaluate the potential of the manuscript for publication as well as the selection of an appropriate journal to which to submit it. For information on selecting and prioritizing a journal (and tips for avoiding predatory or deceptive journals), see Sections 12.2 to 12.4 of the Publication Manual .

Adapting a dissertation or thesis for publication

Once a decision is made to convert your dissertation or thesis into a manuscript for submission to a journal, you will want to focus attention on adapting it for publication. By attending to brevity and focus, writing style, relevant literature review and data analyses, and appropriate interpretation of the results or findings, you can enhance the fit of your manuscript for journal publication. Editors and reviewers readily recognize an article that has been hastily converted; careful attention when reformatting the dissertation or thesis is likely to increase the manuscript’s potential for serious consideration and eventual publication.

There are several steps writers seeking to prepare their dissertation or thesis for publication can take beforehand:

• Look at articles in the field and in relevant journals to see what structure and focus are appropriate for their work and how they are formatted.
• Request and consider the input of advisors, colleagues, or other coauthors who contributed to the research on which the dissertation or thesis is based.
• Review an article submitted to a journal alongside their advisor (with permission from the journal editor) or serve as a reviewer for a student competition to gain firsthand insight into how authors are evaluated when undergoing peer review.

The original research reported in a dissertation and thesis can then be reformatted for journal submission following one of two general strategies: the multiple-paper strategy or the conversion strategy.

Multiple-paper strategy

The quickest strategy for converting (or “flipping”) a dissertation or thesis into one or more publishable articles is to use a multiple-paper format when initially writing the dissertation or thesis. This involves structuring the dissertation or thesis used to fulfill the requirements for a degree as a series of shorter papers that are already formatted for journal submission (or close to it). These papers are usually each the length of a journal article, conceptually similar, and come from the same overarching project—but can stand alone as independent research reports. Consult your university’s editorial office to confirm that this is an approved format for your dissertation or thesis and to obtain the specific guidelines.

Conversion strategy

A second strategy is to reformat and convert a dissertation or thesis into a journal article after completing your dissertation or thesis defense to fit the scope and style of a journal article. This often requires adjustments to the following elements:

• Length: Brevity is an important consideration for a manuscript to be considered for journal publication, particularly in the introduction and Discussion sections. Making a dissertation or thesis publication-ready often involves reducing a document of over 100 pages to one third of its original length. Shorten the overall paper by eliminating text within sections and/or eliminating entire sections. If the work examined several research questions, you may consider separating distinct research questions into individual papers; narrow the focus to a specific topic for each paper.
• Abstract: The abstract may need to be condensed to meet the length requirements of the journal. Journal abstract requirements are usually more limited than college or university requirements. For instance, most APA journals limit the abstract length to 250 words.
• Introduction section: One of the major challenges in reformatting a dissertation or thesis is paring down its comprehensive literature review to a more succinct one suitable for the introduction of a journal article. Limit the introductory text to material relating to the immediate context of your research questions and hypotheses. Eliminate extraneous content or sections that do not directly contribute to readers’ knowledge or understanding of the specific research question(s) or topic(s) under investigation. End with a clear description of the questions, aims, or hypotheses that informed your research.
• Method section: Provide enough information to allow readers to understand how the data were collected and evaluated. Refer readers to previous works that informed the current study’s methods or to supplemental materials instead of providing full details of every step taken or the rationale behind them.
• Results section: Be selective in choosing analyses for inclusion in the Results section and report only the most relevant ones. Although an unbiased approach is important to avoid omitting study data, reporting every analysis that may have been run for the dissertation or thesis often is not feasible, appropriate, or useful in the limited space of a journal article. Instead, ensure that the results directly contribute to answering your original research questions or hypotheses and exclude more ancillary analyses (or include them as supplemental materials). Be clear in identifying your primary, secondary, and any exploratory analyses.
• Discussion section: Adjust the discussion according to the analyses and results you report. Check that your interpretation and application of the findings are appropriate and do not extrapolate beyond the data. A strong Discussion section notes area of consensus with and divergence from previous work, taking into account sample size and composition, effect size, limitations of measurement, and other specific considerations of the study.
• References: Include only the most pertinent references (i.e., theoretically important or recent), especially in the introduction and literature review, rather than providing an exhaustive list. Ensure that the works you cite contribute to readers’ knowledge of the specific topic and to understanding and contextualizing your research. Citation of reviews and meta-analyses can guide interested readers to the broader literature while providing an economical way of referencing prior studies.
• Tables and figures: Make sure that tables or figures are essential and do not reproduce content provided in the text.

Have a language expert improve your writing

Run a free plagiarism check in 10 minutes, generate accurate citations for free.

• Knowledge Base
• Dissertation
• Dissertation & Thesis Outline | Example & Free Templates

Dissertation & Thesis Outline | Example & Free Templates

Published on June 7, 2022 by Tegan George . Revised on November 21, 2023.

A thesis or dissertation outline is one of the most critical early steps in your writing process . It helps you to lay out and organize your ideas and can provide you with a roadmap for deciding the specifics of your dissertation topic and showcasing its relevance to your field.

Generally, an outline contains information on the different sections included in your thesis or dissertation , such as:

• Your anticipated title
• Your abstract
• Your chapters (sometimes subdivided into further topics like literature review, research methods, avenues for future research, etc.)

In the final product, you can also provide a chapter outline for your readers. This is a short paragraph at the end of your introduction to inform readers about the organizational structure of your thesis or dissertation. This chapter outline is also known as a reading guide or summary outline.

Table of contents

How to outline your thesis or dissertation, dissertation and thesis outline templates, chapter outline example, sample sentences for your chapter outline, sample verbs for variation in your chapter outline, other interesting articles, frequently asked questions about thesis and dissertation outlines.

While there are some inter-institutional differences, many outlines proceed in a fairly similar fashion.

• Working Title
• “Elevator pitch” of your work (often written last).
• Introduce your area of study, sharing details about your research question, problem statement , and hypotheses . Situate your research within an existing paradigm or conceptual or theoretical framework .
• Subdivide as you see fit into main topics and sub-topics.
• Describe your research methods (e.g., your scope , population , and data collection ).
• Present your research findings and share about your data analysis methods.
• Answer the research question in a concise way.
• Interpret your findings, discuss potential limitations of your own research and speculate about future implications or related opportunities.

For a more detailed overview of chapters and other elements, be sure to check out our article on the structure of a dissertation or download our template .

To help you get started, we’ve created a full thesis or dissertation template in Word or Google Docs format. It’s easy adapt it to your own requirements.

 Download Word template    Download Google Docs template

It can be easy to fall into a pattern of overusing the same words or sentence constructions, which can make your work monotonous and repetitive for your readers. Consider utilizing some of the alternative constructions presented below.

Example 1: Passive construction

The passive voice is a common choice for outlines and overviews because the context makes it clear who is carrying out the action (e.g., you are conducting the research ). However, overuse of the passive voice can make your text vague and imprecise.

Example 2: IS-AV construction

You can also present your information using the “IS-AV” (inanimate subject with an active verb ) construction.

A chapter is an inanimate object, so it is not capable of taking an action itself (e.g., presenting or discussing). However, the meaning of the sentence is still easily understandable, so the IS-AV construction can be a good way to add variety to your text.

Example 3: The “I” construction

Another option is to use the “I” construction, which is often recommended by style manuals (e.g., APA Style and Chicago style ). However, depending on your field of study, this construction is not always considered professional or academic. Ask your supervisor if you’re not sure.

Example 4: Mix-and-match

To truly make the most of these options, consider mixing and matching the passive voice , IS-AV construction , and “I” construction .This can help the flow of your argument and improve the readability of your text.

As you draft the chapter outline, you may also find yourself frequently repeating the same words, such as “discuss,” “present,” “prove,” or “show.” Consider branching out to add richness and nuance to your writing. Here are some examples of synonyms you can use.

If you want to know more about AI for academic writing, AI tools, or research bias, make sure to check out some of our other articles with explanations and examples or go directly to our tools!

Research bias

• Anchoring bias
• Halo effect
• The Baader–Meinhof phenomenon
• The placebo effect
• Nonresponse bias
• Deep learning
• Generative AI
• Machine learning
• Reinforcement learning
• Supervised vs. unsupervised learning

 (AI) Tools

• Grammar Checker
• Paraphrasing Tool
• Text Summarizer
• AI Detector
• Plagiarism Checker
• Citation Generator

When you mention different chapters within your text, it’s considered best to use Roman numerals for most citation styles. However, the most important thing here is to remain consistent whenever using numbers in your dissertation .

The title page of your thesis or dissertation goes first, before all other content or lists that you may choose to include.

A thesis or dissertation outline is one of the most critical first steps in your writing process. It helps you to lay out and organize your ideas and can provide you with a roadmap for deciding what kind of research you’d like to undertake.

• Your chapters (sometimes subdivided into further topics like literature review , research methods , avenues for future research, etc.)

Cite this Scribbr article

If you want to cite this source, you can copy and paste the citation or click the “Cite this Scribbr article” button to automatically add the citation to our free Citation Generator.

George, T. (2023, November 21). Dissertation & Thesis Outline | Example & Free Templates. Scribbr. Retrieved August 21, 2024, from https://www.scribbr.com/dissertation/dissertation-thesis-outline/

Is this article helpful?

Tegan George

Other students also liked, dissertation table of contents in word | instructions & examples, figure and table lists | word instructions, template & examples, thesis & dissertation acknowledgements | tips & examples, get unlimited documents corrected.

✔ Free APA citation check included ✔ Unlimited document corrections ✔ Specialized in correcting academic texts