the experiment group

• COVID-19 Tracker
• Biochemistry
• Anatomy & Physiology
• Microbiology
• Neuroscience
• Animal Kingdom
• NGSS High School
• Latest News
• Editors’ Picks
• Weekly Digest
• Quotes about Biology

Experimental Group

Reviewed by: BD Editors

Experimental Group Definition

In a comparative experiment, the experimental group (aka the treatment group) is the group being tested for a reaction to a change in the variable. There may be experimental groups in a study, each testing a different level or amount of the variable. The other type of group, the control group , can show the effects of the variable by having a set amount, or none, of the variable. The experimental groups vary in the level of variable they are exposed to, which shows the effects of various levels of a variable on similar organisms.

In biological experiments, the subjects being studied are often living organisms. In such cases, it is desirable that all the subjects be closely related, in order to reduce the amount of genetic variation present in the experiment. The complicated interactions between genetics and the environment can cause very peculiar results when exposed to the same variable. If the organisms being tested are not related, the results could be the effects of the genetics and not the variable. This is why new human drugs must be rigorously tested in a variety of animals before they can be tested on humans. These different experimental groups allow researchers to see the effects of their drug on different genetics. By using animals that are closer and closer in their relation to humans, eventually human trials can take place without severe risks for the first people to try the drug.

Examples of Experimental Group

A simple experiment.

A student is conducting an experiment on the effects music has on growing plants. The student wants to know if music can help plants grow and, if so, which type of music the plants prefer. The students divide a group of plants in to two main groups, the control group and the experimental group. The control group will be kept in a room with no music, while the experimental group will be further divided into smaller experimental groups. Each of the experimental groups is placed in a separate room, with a different type of music.

Ideally, each room would have many plants in it, and all the plants used in the experiment would be clones of the same plant. Even more ideally, the plant would breed true, or would be homozygous for all genes. This would introduce the smallest amount of genetic variation into the experiment. By limiting all other variables, such as the temperature and humidity, the experiment can determine with validity that the effects produced in each room are attributable to the music, and nothing else.

Bugs in the River

To study the effects of variable on many organisms at once, scientist sometimes study ecosystems as a whole. The productivity of these ecosystems is often determined by the amount of oxygen they produce, which is an indication of how much algae is present. Ecologists sometimes study the interactions of organisms on these environments by excluding or adding organisms to an experimental group of ecosystems, and test the effects of their variable against ecosystems with no tampering. This method can sometimes show the drastic effects that various organisms have on an ecosystem.

Many experiments of this kind take place, and a common theme is to separate a single ecosystem into parts, with artificial divisions. Thus, a river could be separated by netting it into areas with and without bugs. The area with no nets allows bugs into the water. The bugs not only eat algae, but die and provide nutrients for the algae to grow. Without the bugs, various effects can be seen on the experimental portion of the river, covered by netting. The levels of oxygen in the water in each system can be measured, as well as other indicators of water quality. By comparing these groups, ecologists can begin to discern the complex relationships between populations of organisms in the environment.

Related Biology Terms

• Control Group – The group that remains unchanged during the experiment, to provide comparison.
• Scientific Method – The process scientists use to obtain valid, repeatable results.
• Comparative Experiment – An experiment in which two groups, the control and experiment groups, are compared.
• Validity – A measure of whether an experiment was caused by the changes in the variable, or simply the forces of chance.

Cite This Article

Subscribe to our newsletter, privacy policy, terms of service, scholarship, latest posts, white blood cell, t cell immunity, satellite cells, embryonic stem cells, popular topics, scientific method, digestive system, hydrochloric acid, amino acids, endocrine system, adenosine triphosphate (atp).

Experimental Group

• Reference work entry
• First Online: 01 January 2020
• pp 1491–1493
• Cite this reference work entry

• Sven Hilbert 3 , 4 , 5  

11 Accesses

In an experimental treatment study, the experimental group is the group that receives the treatment.

Introduction

Experimental treatment studies are designed to estimate the effect of a particular treatment on one or more variables. Typically, the variables of interest are observed before and after treatment to detect changes that occurred in between. The two observations of the variables are called pretest and posttest to indicate their temporal position before and after the treatment. However, any differences between pre- and posttest need not be caused by the treatment. Therefore, experimental treatment studies use at least two groups: the experimental group receives the treatment, while the control group does not. The effect of the treatment can be estimated by comparing the change observed in the treatment group with the change observed in the control group.

Treatment Groups as Independent Variables in an Experiment

In an experimental treatment study, the variables of...

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Subscribe and save.

• Get 10 units per month
• Download Article/Chapter or eBook
• 1 Unit = 1 Article or 1 Chapter
• Cancel anytime
• Available as PDF
• Read on any device
• Instant download
• Own it forever
• Available as EPUB and PDF
• Durable hardcover edition
• Dispatched in 3 to 5 business days
• Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Author information

Authors and affiliations.

Department of Psychology, Psychological Methods and Assessment, Münich, Germany

Sven Hilbert

Faculty of Psychology, Educational Science, and Sport Science, University of Regensburg, Regensburg, Germany

Psychological Methods and Assessment, LMU Munich, Munich, Germany

You can also search for this author in PubMed   Google Scholar

Corresponding author

Correspondence to Sven Hilbert .

Editor information

Editors and affiliations.

Oakland University, Rochester, MI, USA

Virgil Zeigler-Hill

Todd K. Shackelford

Section Editor information

Humboldt University, Germany, Berlin, Germany

Matthias Ziegler

Rights and permissions

Reprints and permissions

Copyright information

© 2020 Springer Nature Switzerland AG

About this entry

Cite this entry.

Hilbert, S. (2020). Experimental Group. In: Zeigler-Hill, V., Shackelford, T.K. (eds) Encyclopedia of Personality and Individual Differences. Springer, Cham. https://doi.org/10.1007/978-3-319-24612-3_1301

Download citation

DOI : https://doi.org/10.1007/978-3-319-24612-3_1301

Published : 22 April 2020

Publisher Name : Springer, Cham

Print ISBN : 978-3-319-24610-9

Online ISBN : 978-3-319-24612-3

eBook Packages : Behavioral Science and Psychology Reference Module Humanities and Social Sciences Reference Module Business, Economics and Social Sciences

Share this entry

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative

• Publish with us

Policies and ethics

• Find a journal
• Track your research

• History & Society
• Science & Tech
• Biographies
• Animals & Nature
• Geography & Travel
• Arts & Culture
• Games & Quizzes
• On This Day
• One Good Fact
• New Articles
• Lifestyles & Social Issues
• Philosophy & Religion
• Politics, Law & Government
• World History
• Health & Medicine
• Browse Biographies
• Birds, Reptiles & Other Vertebrates
• Bugs, Mollusks & Other Invertebrates
• Environment
• Fossils & Geologic Time
• Entertainment & Pop Culture
• Sports & Recreation
• Visual Arts
• Demystified
• Image Galleries
• Infographics
• Top Questions
• Britannica Kids
• Saving Earth
• Space Next 50
• Student Center
• Where was science invented?
• When did science begin?

control group

Our editors will review what you’ve submitted and determine whether to revise the article.

• Verywell Mind - What Is a Control Group?
• National Center for Biotechnology Information - PubMed Central - Control Group Design: Enhancing Rigor in Research of Mind-Body Therapies for Depression

control group , the standard to which comparisons are made in an experiment. Many experiments are designed to include a control group and one or more experimental groups; in fact, some scholars reserve the term experiment for study designs that include a control group. Ideally, the control group and the experimental groups are identical in every way except that the experimental groups are subjected to treatments or interventions believed to have an effect on the outcome of interest while the control group is not. Inclusion of a control group greatly strengthens researchers’ ability to draw conclusions from a study. Indeed, only in the presence of a control group can a researcher determine whether a treatment under investigation truly has a significant effect on an experimental group, and the possibility of making an erroneous conclusion is reduced. See also scientific method .

A typical use of a control group is in an experiment in which the effect of a treatment is unknown and comparisons between the control group and the experimental group are used to measure the effect of the treatment. For instance, in a pharmaceutical study to determine the effectiveness of a new drug on the treatment of migraines , the experimental group will be administered the new drug and the control group will be administered a placebo (a drug that is inert, or assumed to have no effect). Each group is then given the same questionnaire and asked to rate the effectiveness of the drug in relieving symptoms . If the new drug is effective, the experimental group is expected to have a significantly better response to it than the control group. Another possible design is to include several experimental groups, each of which is given a different dosage of the new drug, plus one control group. In this design, the analyst will compare results from each of the experimental groups to the control group. This type of experiment allows the researcher to determine not only if the drug is effective but also the effectiveness of different dosages. In the absence of a control group, the researcher’s ability to draw conclusions about the new drug is greatly weakened, due to the placebo effect and other threats to validity. Comparisons between the experimental groups with different dosages can be made without including a control group, but there is no way to know if any of the dosages of the new drug are more or less effective than the placebo.

It is important that every aspect of the experimental environment be as alike as possible for all subjects in the experiment. If conditions are different for the experimental and control groups, it is impossible to know whether differences between groups are actually due to the difference in treatments or to the difference in environment. For example, in the new migraine drug study, it would be a poor study design to administer the questionnaire to the experimental group in a hospital setting while asking the control group to complete it at home. Such a study could lead to a misleading conclusion, because differences in responses between the experimental and control groups could have been due to the effect of the drug or could have been due to the conditions under which the data were collected. For instance, perhaps the experimental group received better instructions or was more motivated by being in the hospital setting to give accurate responses than the control group.

In non-laboratory and nonclinical experiments, such as field experiments in ecology or economics , even well-designed experiments are subject to numerous and complex variables that cannot always be managed across the control group and experimental groups. Randomization, in which individuals or groups of individuals are randomly assigned to the treatment and control groups, is an important tool to eliminate selection bias and can aid in disentangling the effects of the experimental treatment from other confounding factors. Appropriate sample sizes are also important.

A control group study can be managed in two different ways. In a single-blind study, the researcher will know whether a particular subject is in the control group, but the subject will not know. In a double-blind study , neither the subject nor the researcher will know which treatment the subject is receiving. In many cases, a double-blind study is preferable to a single-blind study, since the researcher cannot inadvertently affect the results or their interpretation by treating a control subject differently from an experimental subject.

Experimental Group (Treatment Group): Definition, Examples

Design of Experiments > Experimental Group

What is an Experimental Group?

An experimental group (sometimes called a treatment group ) is a group that receives a treatment in an experiment. The “group” is made up of test subjects (people, animals, plants, cells etc.) and the “treatment” is the variable you are studying. For example, a human experimental group could receive a new medication, a different form of counseling, or some vitamin supplements. A plant treatment group could receive a new plant fertilizer, more sunlight, or distilled water. The group that does not receive the treatment is called the control group .

Treatment Group Examples

• You are testing to see if a new plant fertilizer increases sunflower size. You put 20 plants of the same height and strain into a location where all the plants get the same amount of water and sunlight. One half of the plants–the control group–get the regular fertilizer. The other half of the plants–the experimental group–get the fertilizer you are testing.
• You are testing to see if a new drug works for asthma. You divide 100 volunteers into two groups of 50. One group of 50 gets the drug; they are the experimental group. The other 50 people get a sugar pill (a placebo); they are the control group.
• You want to prove that covering meat prevents maggots from hatching. You put meat into two different jars: one with a lid and one left open. The jar with the lid is the experimental group; the jar left open is the control group. (This is the famous Redi experiment ).

The only difference between the control group and the experimental group must be the hypothesis you are testing. In the first example above, the people must be of similar age, health status, socioeconomic background etc. That way you know that if the drug improves asthma for the experimental group, it’s not due to other factors like better health status or a younger age.

• Bipolar Disorder
• Therapy Center
• When To See a Therapist
• Types of Therapy
• Best Online Therapy
• Best Couples Therapy
• Managing Stress
• Sleep and Dreaming
• Understanding Emotions
• Self-Improvement
• Healthy Relationships
• Student Resources
• Personality Types
• Sweepstakes
• Guided Meditations
• Verywell Mind Insights
• 2024 Verywell Mind 25
• Mental Health in the Classroom
• Editorial Process
• Meet Our Review Board
• Crisis Support

What Is a Control Group?

Control Groups vs. Experimental Groups in Psychology Research

Doug Corrance/The Image Bank/Getty Images

Control Group vs. Experimental Group

Types of control groups.

In simple terms, the control group comprises participants who do not receive the experimental treatment. When conducting an experiment, these people are randomly assigned to this group. They also closely resemble the participants who are in the experimental group or the individuals who receive the treatment.

Experimenters utilize variables to make comparisons between an experimental group and a control group. A variable is something that researchers can manipulate, measure, and control in an experiment. The independent variable is the aspect of the experiment that the researchers manipulate (or the treatment). The dependent variable is what the researchers measure to see if the independent variable had an effect.

While they do not receive the treatment, the control group does play a vital role in the research process. Experimenters compare the experimental group to the control group to determine if the treatment had an effect.

By serving as a comparison group, researchers can isolate the independent variable and look at the impact it had.

The simplest way to determine the difference between a control group and an experimental group is to determine which group receives the treatment and which does not. To ensure that the results can then be compared accurately, the two groups should be otherwise identical.

Not exposed to the treatment (the independent variable)

Used to provide a baseline to compare results against

May receive a placebo treatment

Exposed to the treatment

Used to measure the effects of the independent variable

Identical to the control group aside from their exposure to the treatment

Why a Control Group Is Important

While the control group does not receive treatment, it does play a critical role in the experimental process. This group serves as a benchmark, allowing researchers to compare the experimental group to the control group to see what sort of impact changes to the independent variable produced.  

Because participants have been randomly assigned to either the control group or the experimental group, it can be assumed that the groups are comparable.

Any differences between the two groups are, therefore, the result of the manipulations of the independent variable. The experimenters carry out the exact same procedures with both groups with the exception of the manipulation of the independent variable in the experimental group.

There are a number of different types of control groups that might be utilized in psychology research. Some of these include:

• Positive control groups : In this case, researchers already know that a treatment is effective but want to learn more about the impact of variations of the treatment. In this case, the control group receives the treatment that is known to work, while the experimental group receives the variation so that researchers can learn more about how it performs and compares to the control.
• Negative control group : In this type of control group, the participants are not given a treatment. The experimental group can then be compared to the group that did not experience any change or results.
• Placebo control group : This type of control group receives a placebo treatment that they believe will have an effect. This control group allows researchers to examine the impact of the placebo effect and how the experimental treatment compared to the placebo treatment.
• Randomized control group : This type of control group involves using random selection to help ensure that the participants in the control group accurately reflect the demographics of the larger population.
• Natural control group : This type of control group is naturally selected, often by situational factors. For example, researchers might compare people who have experienced trauma due to war to people who have not experienced war. The people who have not experienced war-related trauma would be the control group.

Examples of Control Groups

Control groups can be used in a variety of situations. For example, imagine a study in which researchers example how distractions during an exam influence test results. The control group would take an exam in a setting with no distractions, while the experimental groups would be exposed to different distractions. The results of the exam would then be compared to see the effects that distractions had on test scores.

Experiments that look at the effects of medications on certain conditions are also examples of how a control group can be used in research. For example, researchers looking at the effectiveness of a new antidepressant might use a control group that receives a placebo and an experimental group that receives the new medication. At the end of the study, researchers would compare measures of depression for both groups to determine what impact the new medication had.

After the experiment is complete, researchers can then look at the test results and start making comparisons between the control group and the experimental group.

Uses for Control Groups

Researchers utilize control groups to conduct research in a range of different fields. Some common uses include:

• Psychology : Researchers utilize control groups to learn more about mental health, behaviors, and treatments.
• Medicine : Control groups can be used to learn more about certain health conditions, assess how well medications work to treat these conditions, and assess potential side effects that may result.
• Education : Educational researchers utilize control groups to learn more about how different curriculums, programs, or instructional methods impact student outcomes.
• Marketing : Researchers utilize control groups to learn more about how consumers respond to advertising and marketing efforts.

Malay S, Chung KC. The choice of controls for providing validity and evidence in clinical research . Plast Reconstr Surg. 2012 Oct;130(4):959-965. doi:10.1097/PRS.0b013e318262f4c8

National Cancer Institute. Control group.

Pithon MM. Importance of the control group in scientific research . Dental Press J Orthod. 2013;18(6):13-14. doi:10.1590/s2176-94512013000600003

Karlsson P, Bergmark A. Compared with what? An analysis of control-group types in Cochrane and Campbell reviews of psychosocial treatment efficacy with substance use disorders . Addiction . 2015;110(3):420-8. doi:10.1111/add.12799

Myers A, Hansen C. Experimental Psychology . Belmont, CA: Cengage Learning; 2012.

By Kendra Cherry, MSEd Kendra Cherry, MS, is a psychosocial rehabilitation specialist, psychology educator, and author of the "Everything Psychology Book."

Frequently asked questions

What is the difference between a control group and an experimental group.

An experimental group, also known as a treatment group, receives the treatment whose effect researchers wish to study, whereas a control group does not. They should be identical in all other ways.

Frequently asked questions: Methodology

Attrition refers to participants leaving a study. It always happens to some extent—for example, in randomized controlled trials for medical research.

Differential attrition occurs when attrition or dropout rates differ systematically between the intervention and the control group . As a result, the characteristics of the participants who drop out differ from the characteristics of those who stay in the study. Because of this, study results may be biased .

Action research is conducted in order to solve a particular issue immediately, while case studies are often conducted over a longer period of time and focus more on observing and analyzing a particular ongoing phenomenon.

Action research is focused on solving a problem or informing individual and community-based knowledge in a way that impacts teaching, learning, and other related processes. It is less focused on contributing theoretical input, instead producing actionable input.

Action research is particularly popular with educators as a form of systematic inquiry because it prioritizes reflection and bridges the gap between theory and practice. Educators are able to simultaneously investigate an issue as they solve it, and the method is very iterative and flexible.

A cycle of inquiry is another name for action research . It is usually visualized in a spiral shape following a series of steps, such as “planning → acting → observing → reflecting.”

To make quantitative observations , you need to use instruments that are capable of measuring the quantity you want to observe. For example, you might use a ruler to measure the length of an object or a thermometer to measure its temperature.

Criterion validity and construct validity are both types of measurement validity . In other words, they both show you how accurately a method measures something.

While construct validity is the degree to which a test or other measurement method measures what it claims to measure, criterion validity is the degree to which a test can predictively (in the future) or concurrently (in the present) measure something.

Construct validity is often considered the overarching type of measurement validity . You need to have face validity , content validity , and criterion validity in order to achieve construct validity.

Convergent validity and discriminant validity are both subtypes of construct validity . Together, they help you evaluate whether a test measures the concept it was designed to measure.

• Convergent validity indicates whether a test that is designed to measure a particular construct correlates with other tests that assess the same or similar construct.
• Discriminant validity indicates whether two tests that should not be highly related to each other are indeed not related. This type of validity is also called divergent validity .

You need to assess both in order to demonstrate construct validity. Neither one alone is sufficient for establishing construct validity.

• Discriminant validity indicates whether two tests that should not be highly related to each other are indeed not related

Content validity shows you how accurately a test or other measurement method taps  into the various aspects of the specific construct you are researching.

In other words, it helps you answer the question: “does the test measure all aspects of the construct I want to measure?” If it does, then the test has high content validity.

The higher the content validity, the more accurate the measurement of the construct.

If the test fails to include parts of the construct, or irrelevant parts are included, the validity of the instrument is threatened, which brings your results into question.

Face validity and content validity are similar in that they both evaluate how suitable the content of a test is. The difference is that face validity is subjective, and assesses content at surface level.

When a test has strong face validity, anyone would agree that the test’s questions appear to measure what they are intended to measure.

For example, looking at a 4th grade math test consisting of problems in which students have to add and multiply, most people would agree that it has strong face validity (i.e., it looks like a math test).

On the other hand, content validity evaluates how well a test represents all the aspects of a topic. Assessing content validity is more systematic and relies on expert evaluation. of each question, analyzing whether each one covers the aspects that the test was designed to cover.

A 4th grade math test would have high content validity if it covered all the skills taught in that grade. Experts(in this case, math teachers), would have to evaluate the content validity by comparing the test to the learning objectives.

Snowball sampling is a non-probability sampling method . Unlike probability sampling (which involves some form of random selection ), the initial individuals selected to be studied are the ones who recruit new participants.

Because not every member of the target population has an equal chance of being recruited into the sample, selection in snowball sampling is non-random.

Snowball sampling is a non-probability sampling method , where there is not an equal chance for every member of the population to be included in the sample .

This means that you cannot use inferential statistics and make generalizations —often the goal of quantitative research . As such, a snowball sample is not representative of the target population and is usually a better fit for qualitative research .

Snowball sampling relies on the use of referrals. Here, the researcher recruits one or more initial participants, who then recruit the next ones.

Participants share similar characteristics and/or know each other. Because of this, not every member of the population has an equal chance of being included in the sample, giving rise to sampling bias .

Snowball sampling is best used in the following cases:

• If there is no sampling frame available (e.g., people with a rare disease)
• If the population of interest is hard to access or locate (e.g., people experiencing homelessness)
• If the research focuses on a sensitive topic (e.g., extramarital affairs)

The reproducibility and replicability of a study can be ensured by writing a transparent, detailed method section and using clear, unambiguous language.

Reproducibility and replicability are related terms.

• Reproducing research entails reanalyzing the existing data in the same manner.
• Replicating (or repeating ) the research entails reconducting the entire analysis, including the collection of new data . 
• A successful reproduction shows that the data analyses were conducted in a fair and honest manner.
• A successful replication shows that the reliability of the results is high.

Stratified sampling and quota sampling both involve dividing the population into subgroups and selecting units from each subgroup. The purpose in both cases is to select a representative sample and/or to allow comparisons between subgroups.

The main difference is that in stratified sampling, you draw a random sample from each subgroup ( probability sampling ). In quota sampling you select a predetermined number or proportion of units, in a non-random manner ( non-probability sampling ).

Purposive and convenience sampling are both sampling methods that are typically used in qualitative data collection.

A convenience sample is drawn from a source that is conveniently accessible to the researcher. Convenience sampling does not distinguish characteristics among the participants. On the other hand, purposive sampling focuses on selecting participants possessing characteristics associated with the research study.

The findings of studies based on either convenience or purposive sampling can only be generalized to the (sub)population from which the sample is drawn, and not to the entire population.

Random sampling or probability sampling is based on random selection. This means that each unit has an equal chance (i.e., equal probability) of being included in the sample.

On the other hand, convenience sampling involves stopping people at random, which means that not everyone has an equal chance of being selected depending on the place, time, or day you are collecting your data.

Convenience sampling and quota sampling are both non-probability sampling methods. They both use non-random criteria like availability, geographical proximity, or expert knowledge to recruit study participants.

However, in convenience sampling, you continue to sample units or cases until you reach the required sample size.

In quota sampling, you first need to divide your population of interest into subgroups (strata) and estimate their proportions (quota) in the population. Then you can start your data collection, using convenience sampling to recruit participants, until the proportions in each subgroup coincide with the estimated proportions in the population.

A sampling frame is a list of every member in the entire population . It is important that the sampling frame is as complete as possible, so that your sample accurately reflects your population.

Stratified and cluster sampling may look similar, but bear in mind that groups created in cluster sampling are heterogeneous , so the individual characteristics in the cluster vary. In contrast, groups created in stratified sampling are homogeneous , as units share characteristics.

Relatedly, in cluster sampling you randomly select entire groups and include all units of each group in your sample. However, in stratified sampling, you select some units of all groups and include them in your sample. In this way, both methods can ensure that your sample is representative of the target population .

A systematic review is secondary research because it uses existing research. You don’t collect new data yourself.

The key difference between observational studies and experimental designs is that a well-done observational study does not influence the responses of participants, while experiments do have some sort of treatment condition applied to at least some participants by random assignment .

An observational study is a great choice for you if your research question is based purely on observations. If there are ethical, logistical, or practical concerns that prevent you from conducting a traditional experiment , an observational study may be a good choice. In an observational study, there is no interference or manipulation of the research subjects, as well as no control or treatment groups .

It’s often best to ask a variety of people to review your measurements. You can ask experts, such as other researchers, or laypeople, such as potential participants, to judge the face validity of tests.

While experts have a deep understanding of research methods , the people you’re studying can provide you with valuable insights you may have missed otherwise.

Face validity is important because it’s a simple first step to measuring the overall validity of a test or technique. It’s a relatively intuitive, quick, and easy way to start checking whether a new measure seems useful at first glance.

Good face validity means that anyone who reviews your measure says that it seems to be measuring what it’s supposed to. With poor face validity, someone reviewing your measure may be left confused about what you’re measuring and why you’re using this method.

Face validity is about whether a test appears to measure what it’s supposed to measure. This type of validity is concerned with whether a measure seems relevant and appropriate for what it’s assessing only on the surface.

Statistical analyses are often applied to test validity with data from your measures. You test convergent validity and discriminant validity with correlations to see if results from your test are positively or negatively related to those of other established tests.

You can also use regression analyses to assess whether your measure is actually predictive of outcomes that you expect it to predict theoretically. A regression analysis that supports your expectations strengthens your claim of construct validity .

When designing or evaluating a measure, construct validity helps you ensure you’re actually measuring the construct you’re interested in. If you don’t have construct validity, you may inadvertently measure unrelated or distinct constructs and lose precision in your research.

Construct validity is often considered the overarching type of measurement validity ,  because it covers all of the other types. You need to have face validity , content validity , and criterion validity to achieve construct validity.

Construct validity is about how well a test measures the concept it was designed to evaluate. It’s one of four types of measurement validity , which includes construct validity, face validity , and criterion validity.

There are two subtypes of construct validity.

• Convergent validity : The extent to which your measure corresponds to measures of related constructs
• Discriminant validity : The extent to which your measure is unrelated or negatively related to measures of distinct constructs

Naturalistic observation is a valuable tool because of its flexibility, external validity , and suitability for topics that can’t be studied in a lab setting.

The downsides of naturalistic observation include its lack of scientific control , ethical considerations , and potential for bias from observers and subjects.

Naturalistic observation is a qualitative research method where you record the behaviors of your research subjects in real world settings. You avoid interfering or influencing anything in a naturalistic observation.

You can think of naturalistic observation as “people watching” with a purpose.

A dependent variable is what changes as a result of the independent variable manipulation in experiments . It’s what you’re interested in measuring, and it “depends” on your independent variable.

In statistics, dependent variables are also called:

• Response variables (they respond to a change in another variable)
• Outcome variables (they represent the outcome you want to measure)
• Left-hand-side variables (they appear on the left-hand side of a regression equation)

An independent variable is the variable you manipulate, control, or vary in an experimental study to explore its effects. It’s called “independent” because it’s not influenced by any other variables in the study.

Independent variables are also called:

• Explanatory variables (they explain an event or outcome)
• Predictor variables (they can be used to predict the value of a dependent variable)
• Right-hand-side variables (they appear on the right-hand side of a regression equation).

As a rule of thumb, questions related to thoughts, beliefs, and feelings work well in focus groups. Take your time formulating strong questions, paying special attention to phrasing. Be careful to avoid leading questions , which can bias your responses.

Overall, your focus group questions should be:

• Open-ended and flexible
• Impossible to answer with “yes” or “no” (questions that start with “why” or “how” are often best)
• Unambiguous, getting straight to the point while still stimulating discussion
• Unbiased and neutral

A structured interview is a data collection method that relies on asking questions in a set order to collect data on a topic. They are often quantitative in nature. Structured interviews are best used when: 

• You already have a very clear understanding of your topic. Perhaps significant research has already been conducted, or you have done some prior research yourself, but you already possess a baseline for designing strong structured questions.
• You are constrained in terms of time or resources and need to analyze your data quickly and efficiently.
• Your research question depends on strong parity between participants, with environmental conditions held constant.

More flexible interview options include semi-structured interviews , unstructured interviews , and focus groups .

Social desirability bias is the tendency for interview participants to give responses that will be viewed favorably by the interviewer or other participants. It occurs in all types of interviews and surveys , but is most common in semi-structured interviews , unstructured interviews , and focus groups .

Social desirability bias can be mitigated by ensuring participants feel at ease and comfortable sharing their views. Make sure to pay attention to your own body language and any physical or verbal cues, such as nodding or widening your eyes.

This type of bias can also occur in observations if the participants know they’re being observed. They might alter their behavior accordingly.

The interviewer effect is a type of bias that emerges when a characteristic of an interviewer (race, age, gender identity, etc.) influences the responses given by the interviewee.

There is a risk of an interviewer effect in all types of interviews , but it can be mitigated by writing really high-quality interview questions.

A semi-structured interview is a blend of structured and unstructured types of interviews. Semi-structured interviews are best used when:

• You have prior interview experience. Spontaneous questions are deceptively challenging, and it’s easy to accidentally ask a leading question or make a participant uncomfortable.
• Your research question is exploratory in nature. Participant answers can guide future research questions and help you develop a more robust knowledge base for future research.

An unstructured interview is the most flexible type of interview, but it is not always the best fit for your research topic.

Unstructured interviews are best used when:

• You are an experienced interviewer and have a very strong background in your research topic, since it is challenging to ask spontaneous, colloquial questions.
• Your research question is exploratory in nature. While you may have developed hypotheses, you are open to discovering new or shifting viewpoints through the interview process.
• You are seeking descriptive data, and are ready to ask questions that will deepen and contextualize your initial thoughts and hypotheses.
• Your research depends on forming connections with your participants and making them feel comfortable revealing deeper emotions, lived experiences, or thoughts.

The four most common types of interviews are:

• Structured interviews : The questions are predetermined in both topic and order. 
• Semi-structured interviews : A few questions are predetermined, but other questions aren’t planned.
• Unstructured interviews : None of the questions are predetermined.
• Focus group interviews : The questions are presented to a group instead of one individual.

Deductive reasoning is commonly used in scientific research, and it’s especially associated with quantitative research .

In research, you might have come across something called the hypothetico-deductive method . It’s the scientific method of testing hypotheses to check whether your predictions are substantiated by real-world data.

Deductive reasoning is a logical approach where you progress from general ideas to specific conclusions. It’s often contrasted with inductive reasoning , where you start with specific observations and form general conclusions.

Deductive reasoning is also called deductive logic.

There are many different types of inductive reasoning that people use formally or informally.

Here are a few common types:

• Inductive generalization : You use observations about a sample to come to a conclusion about the population it came from.
• Statistical generalization: You use specific numbers about samples to make statements about populations.
• Causal reasoning: You make cause-and-effect links between different things.
• Sign reasoning: You make a conclusion about a correlational relationship between different things.
• Analogical reasoning: You make a conclusion about something based on its similarities to something else.

Inductive reasoning is a bottom-up approach, while deductive reasoning is top-down.

Inductive reasoning takes you from the specific to the general, while in deductive reasoning, you make inferences by going from general premises to specific conclusions.

In inductive research , you start by making observations or gathering data. Then, you take a broad scan of your data and search for patterns. Finally, you make general conclusions that you might incorporate into theories.

Inductive reasoning is a method of drawing conclusions by going from the specific to the general. It’s usually contrasted with deductive reasoning, where you proceed from general information to specific conclusions.

Inductive reasoning is also called inductive logic or bottom-up reasoning.

A hypothesis states your predictions about what your research will find. It is a tentative answer to your research question that has not yet been tested. For some research projects, you might have to write several hypotheses that address different aspects of your research question.

A hypothesis is not just a guess — it should be based on existing theories and knowledge. It also has to be testable, which means you can support or refute it through scientific research methods (such as experiments, observations and statistical analysis of data).

Triangulation can help:

• Reduce research bias that comes from using a single method, theory, or investigator
• Enhance validity by approaching the same topic with different tools
• Establish credibility by giving you a complete picture of the research problem

But triangulation can also pose problems:

• It’s time-consuming and labor-intensive, often involving an interdisciplinary team.
• Your results may be inconsistent or even contradictory.

There are four main types of triangulation :

• Data triangulation : Using data from different times, spaces, and people
• Investigator triangulation : Involving multiple researchers in collecting or analyzing data
• Theory triangulation : Using varying theoretical perspectives in your research
• Methodological triangulation : Using different methodologies to approach the same topic

Many academic fields use peer review , largely to determine whether a manuscript is suitable for publication. Peer review enhances the credibility of the published manuscript.

However, peer review is also common in non-academic settings. The United Nations, the European Union, and many individual nations use peer review to evaluate grant applications. It is also widely used in medical and health-related fields as a teaching or quality-of-care measure. 

Peer assessment is often used in the classroom as a pedagogical tool. Both receiving feedback and providing it are thought to enhance the learning process, helping students think critically and collaboratively.

Peer review can stop obviously problematic, falsified, or otherwise untrustworthy research from being published. It also represents an excellent opportunity to get feedback from renowned experts in your field. It acts as a first defense, helping you ensure your argument is clear and that there are no gaps, vague terms, or unanswered questions for readers who weren’t involved in the research process.

Peer-reviewed articles are considered a highly credible source due to this stringent process they go through before publication.

In general, the peer review process follows the following steps: 

• First, the author submits the manuscript to the editor.
• Reject the manuscript and send it back to author, or 
• Send it onward to the selected peer reviewer(s) 
• Next, the peer review process occurs. The reviewer provides feedback, addressing any major or minor issues with the manuscript, and gives their advice regarding what edits should be made. 
• Lastly, the edited manuscript is sent back to the author. They input the edits, and resubmit it to the editor for publication.

Exploratory research is often used when the issue you’re studying is new or when the data collection process is challenging for some reason.

You can use exploratory research if you have a general idea or a specific question that you want to study but there is no preexisting knowledge or paradigm with which to study it.

Exploratory research is a methodology approach that explores research questions that have not previously been studied in depth. It is often used when the issue you’re studying is new, or the data collection process is challenging in some way.

Explanatory research is used to investigate how or why a phenomenon occurs. Therefore, this type of research is often one of the first stages in the research process , serving as a jumping-off point for future research.

Exploratory research aims to explore the main aspects of an under-researched problem, while explanatory research aims to explain the causes and consequences of a well-defined problem.

Explanatory research is a research method used to investigate how or why something occurs when only a small amount of information is available pertaining to that topic. It can help you increase your understanding of a given topic.

Clean data are valid, accurate, complete, consistent, unique, and uniform. Dirty data include inconsistencies and errors.

Dirty data can come from any part of the research process, including poor research design , inappropriate measurement materials, or flawed data entry.

Data cleaning takes place between data collection and data analyses. But you can use some methods even before collecting data.

For clean data, you should start by designing measures that collect valid data. Data validation at the time of data entry or collection helps you minimize the amount of data cleaning you’ll need to do.

After data collection, you can use data standardization and data transformation to clean your data. You’ll also deal with any missing values, outliers, and duplicate values.

Every dataset requires different techniques to clean dirty data , but you need to address these issues in a systematic way. You focus on finding and resolving data points that don’t agree or fit with the rest of your dataset.

These data might be missing values, outliers, duplicate values, incorrectly formatted, or irrelevant. You’ll start with screening and diagnosing your data. Then, you’ll often standardize and accept or remove data to make your dataset consistent and valid.

Data cleaning is necessary for valid and appropriate analyses. Dirty data contain inconsistencies or errors , but cleaning your data helps you minimize or resolve these.

Without data cleaning, you could end up with a Type I or II error in your conclusion. These types of erroneous conclusions can be practically significant with important consequences, because they lead to misplaced investments or missed opportunities.

Data cleaning involves spotting and resolving potential data inconsistencies or errors to improve your data quality. An error is any value (e.g., recorded weight) that doesn’t reflect the true value (e.g., actual weight) of something that’s being measured.

In this process, you review, analyze, detect, modify, or remove “dirty” data to make your dataset “clean.” Data cleaning is also called data cleansing or data scrubbing.

Research misconduct means making up or falsifying data, manipulating data analyses, or misrepresenting results in research reports. It’s a form of academic fraud.

These actions are committed intentionally and can have serious consequences; research misconduct is not a simple mistake or a point of disagreement but a serious ethical failure.

Anonymity means you don’t know who the participants are, while confidentiality means you know who they are but remove identifying information from your research report. Both are important ethical considerations .

You can only guarantee anonymity by not collecting any personally identifying information—for example, names, phone numbers, email addresses, IP addresses, physical characteristics, photos, or videos.

You can keep data confidential by using aggregate information in your research report, so that you only refer to groups of participants rather than individuals.

Research ethics matter for scientific integrity, human rights and dignity, and collaboration between science and society. These principles make sure that participation in studies is voluntary, informed, and safe.

Ethical considerations in research are a set of principles that guide your research designs and practices. These principles include voluntary participation, informed consent, anonymity, confidentiality, potential for harm, and results communication.

Scientists and researchers must always adhere to a certain code of conduct when collecting data from others .

These considerations protect the rights of research participants, enhance research validity , and maintain scientific integrity.

In multistage sampling , you can use probability or non-probability sampling methods .

For a probability sample, you have to conduct probability sampling at every stage.

You can mix it up by using simple random sampling , systematic sampling , or stratified sampling to select units at different stages, depending on what is applicable and relevant to your study.

Multistage sampling can simplify data collection when you have large, geographically spread samples, and you can obtain a probability sample without a complete sampling frame.

But multistage sampling may not lead to a representative sample, and larger samples are needed for multistage samples to achieve the statistical properties of simple random samples .

These are four of the most common mixed methods designs :

• Convergent parallel: Quantitative and qualitative data are collected at the same time and analyzed separately. After both analyses are complete, compare your results to draw overall conclusions. 
• Embedded: Quantitative and qualitative data are collected at the same time, but within a larger quantitative or qualitative design. One type of data is secondary to the other.
• Explanatory sequential: Quantitative data is collected and analyzed first, followed by qualitative data. You can use this design if you think your qualitative data will explain and contextualize your quantitative findings.
• Exploratory sequential: Qualitative data is collected and analyzed first, followed by quantitative data. You can use this design if you think the quantitative data will confirm or validate your qualitative findings.

Triangulation in research means using multiple datasets, methods, theories and/or investigators to address a research question. It’s a research strategy that can help you enhance the validity and credibility of your findings.

Triangulation is mainly used in qualitative research , but it’s also commonly applied in quantitative research . Mixed methods research always uses triangulation.

In multistage sampling , or multistage cluster sampling, you draw a sample from a population using smaller and smaller groups at each stage.

This method is often used to collect data from a large, geographically spread group of people in national surveys, for example. You take advantage of hierarchical groupings (e.g., from state to city to neighborhood) to create a sample that’s less expensive and time-consuming to collect data from.

No, the steepness or slope of the line isn’t related to the correlation coefficient value. The correlation coefficient only tells you how closely your data fit on a line, so two datasets with the same correlation coefficient can have very different slopes.

To find the slope of the line, you’ll need to perform a regression analysis .

Correlation coefficients always range between -1 and 1.

The sign of the coefficient tells you the direction of the relationship: a positive value means the variables change together in the same direction, while a negative value means they change together in opposite directions.

The absolute value of a number is equal to the number without its sign. The absolute value of a correlation coefficient tells you the magnitude of the correlation: the greater the absolute value, the stronger the correlation.

These are the assumptions your data must meet if you want to use Pearson’s r :

• Both variables are on an interval or ratio level of measurement
• Data from both variables follow normal distributions
• Your data have no outliers
• Your data is from a random or representative sample
• You expect a linear relationship between the two variables

Quantitative research designs can be divided into two main categories:

• Correlational and descriptive designs are used to investigate characteristics, averages, trends, and associations between variables.
• Experimental and quasi-experimental designs are used to test causal relationships .

Qualitative research designs tend to be more flexible. Common types of qualitative design include case study , ethnography , and grounded theory designs.

A well-planned research design helps ensure that your methods match your research aims, that you collect high-quality data, and that you use the right kind of analysis to answer your questions, utilizing credible sources . This allows you to draw valid , trustworthy conclusions.

The priorities of a research design can vary depending on the field, but you usually have to specify:

• Your research questions and/or hypotheses
• Your overall approach (e.g., qualitative or quantitative )
• The type of design you’re using (e.g., a survey , experiment , or case study )
• Your sampling methods or criteria for selecting subjects
• Your data collection methods (e.g., questionnaires , observations)
• Your data collection procedures (e.g., operationalization , timing and data management)
• Your data analysis methods (e.g., statistical tests  or thematic analysis )

A research design is a strategy for answering your   research question . It defines your overall approach and determines how you will collect and analyze data.

Questionnaires can be self-administered or researcher-administered.

Self-administered questionnaires can be delivered online or in paper-and-pen formats, in person or through mail. All questions are standardized so that all respondents receive the same questions with identical wording.

Researcher-administered questionnaires are interviews that take place by phone, in-person, or online between researchers and respondents. You can gain deeper insights by clarifying questions for respondents or asking follow-up questions.

You can organize the questions logically, with a clear progression from simple to complex, or randomly between respondents. A logical flow helps respondents process the questionnaire easier and quicker, but it may lead to bias. Randomization can minimize the bias from order effects.

Closed-ended, or restricted-choice, questions offer respondents a fixed set of choices to select from. These questions are easier to answer quickly.

Open-ended or long-form questions allow respondents to answer in their own words. Because there are no restrictions on their choices, respondents can answer in ways that researchers may not have otherwise considered.

A questionnaire is a data collection tool or instrument, while a survey is an overarching research method that involves collecting and analyzing data from people using questionnaires.

The third variable and directionality problems are two main reasons why correlation isn’t causation .

The third variable problem means that a confounding variable affects both variables to make them seem causally related when they are not.

The directionality problem is when two variables correlate and might actually have a causal relationship, but it’s impossible to conclude which variable causes changes in the other.

Correlation describes an association between variables : when one variable changes, so does the other. A correlation is a statistical indicator of the relationship between variables.

Causation means that changes in one variable brings about changes in the other (i.e., there is a cause-and-effect relationship between variables). The two variables are correlated with each other, and there’s also a causal link between them.

While causation and correlation can exist simultaneously, correlation does not imply causation. In other words, correlation is simply a relationship where A relates to B—but A doesn’t necessarily cause B to happen (or vice versa). Mistaking correlation for causation is a common error and can lead to false cause fallacy .

Controlled experiments establish causality, whereas correlational studies only show associations between variables.

• In an experimental design , you manipulate an independent variable and measure its effect on a dependent variable. Other variables are controlled so they can’t impact the results.
• In a correlational design , you measure variables without manipulating any of them. You can test whether your variables change together, but you can’t be sure that one variable caused a change in another.

In general, correlational research is high in external validity while experimental research is high in internal validity .

A correlation is usually tested for two variables at a time, but you can test correlations between three or more variables.

A correlation coefficient is a single number that describes the strength and direction of the relationship between your variables.

Different types of correlation coefficients might be appropriate for your data based on their levels of measurement and distributions . The Pearson product-moment correlation coefficient (Pearson’s r ) is commonly used to assess a linear relationship between two quantitative variables.

A correlational research design investigates relationships between two variables (or more) without the researcher controlling or manipulating any of them. It’s a non-experimental type of quantitative research .

A correlation reflects the strength and/or direction of the association between two or more variables.

• A positive correlation means that both variables change in the same direction.
• A negative correlation means that the variables change in opposite directions.
• A zero correlation means there’s no relationship between the variables.

Random error  is almost always present in scientific studies, even in highly controlled settings. While you can’t eradicate it completely, you can reduce random error by taking repeated measurements, using a large sample, and controlling extraneous variables .

You can avoid systematic error through careful design of your sampling , data collection , and analysis procedures. For example, use triangulation to measure your variables using multiple methods; regularly calibrate instruments or procedures; use random sampling and random assignment ; and apply masking (blinding) where possible.

Systematic error is generally a bigger problem in research.

With random error, multiple measurements will tend to cluster around the true value. When you’re collecting data from a large sample , the errors in different directions will cancel each other out.

Systematic errors are much more problematic because they can skew your data away from the true value. This can lead you to false conclusions ( Type I and II errors ) about the relationship between the variables you’re studying.

Random and systematic error are two types of measurement error.

Random error is a chance difference between the observed and true values of something (e.g., a researcher misreading a weighing scale records an incorrect measurement).

Systematic error is a consistent or proportional difference between the observed and true values of something (e.g., a miscalibrated scale consistently records weights as higher than they actually are).

On graphs, the explanatory variable is conventionally placed on the x-axis, while the response variable is placed on the y-axis.

• If you have quantitative variables , use a scatterplot or a line graph.
• If your response variable is categorical, use a scatterplot or a line graph.
• If your explanatory variable is categorical, use a bar graph.

The term “ explanatory variable ” is sometimes preferred over “ independent variable ” because, in real world contexts, independent variables are often influenced by other variables. This means they aren’t totally independent.

Multiple independent variables may also be correlated with each other, so “explanatory variables” is a more appropriate term.

The difference between explanatory and response variables is simple:

• An explanatory variable is the expected cause, and it explains the results.
• A response variable is the expected effect, and it responds to other variables.

In a controlled experiment , all extraneous variables are held constant so that they can’t influence the results. Controlled experiments require:

• A control group that receives a standard treatment, a fake treatment, or no treatment.
• Random assignment of participants to ensure the groups are equivalent.

Depending on your study topic, there are various other methods of controlling variables .

There are 4 main types of extraneous variables :

• Demand characteristics : environmental cues that encourage participants to conform to researchers’ expectations.
• Experimenter effects : unintentional actions by researchers that influence study outcomes.
• Situational variables : environmental variables that alter participants’ behaviors.
• Participant variables : any characteristic or aspect of a participant’s background that could affect study results.

An extraneous variable is any variable that you’re not investigating that can potentially affect the dependent variable of your research study.

A confounding variable is a type of extraneous variable that not only affects the dependent variable, but is also related to the independent variable.

In a factorial design, multiple independent variables are tested.

If you test two variables, each level of one independent variable is combined with each level of the other independent variable to create different conditions.

Within-subjects designs have many potential threats to internal validity , but they are also very statistically powerful .

Advantages:

• Only requires small samples
• Statistically powerful
• Removes the effects of individual differences on the outcomes

Disadvantages:

• Internal validity threats reduce the likelihood of establishing a direct relationship between variables
• Time-related effects, such as growth, can influence the outcomes
• Carryover effects mean that the specific order of different treatments affect the outcomes

While a between-subjects design has fewer threats to internal validity , it also requires more participants for high statistical power than a within-subjects design .

• Prevents carryover effects of learning and fatigue.
• Shorter study duration.
• Needs larger samples for high power.
• Uses more resources to recruit participants, administer sessions, cover costs, etc.
• Individual differences may be an alternative explanation for results.

Yes. Between-subjects and within-subjects designs can be combined in a single study when you have two or more independent variables (a factorial design). In a mixed factorial design, one variable is altered between subjects and another is altered within subjects.

In a between-subjects design , every participant experiences only one condition, and researchers assess group differences between participants in various conditions.

In a within-subjects design , each participant experiences all conditions, and researchers test the same participants repeatedly for differences between conditions.

The word “between” means that you’re comparing different conditions between groups, while the word “within” means you’re comparing different conditions within the same group.

Random assignment is used in experiments with a between-groups or independent measures design. In this research design, there’s usually a control group and one or more experimental groups. Random assignment helps ensure that the groups are comparable.

In general, you should always use random assignment in this type of experimental design when it is ethically possible and makes sense for your study topic.

To implement random assignment , assign a unique number to every member of your study’s sample .

Then, you can use a random number generator or a lottery method to randomly assign each number to a control or experimental group. You can also do so manually, by flipping a coin or rolling a dice to randomly assign participants to groups.

Random selection, or random sampling , is a way of selecting members of a population for your study’s sample.

In contrast, random assignment is a way of sorting the sample into control and experimental groups.

Random sampling enhances the external validity or generalizability of your results, while random assignment improves the internal validity of your study.

In experimental research, random assignment is a way of placing participants from your sample into different groups using randomization. With this method, every member of the sample has a known or equal chance of being placed in a control group or an experimental group.

“Controlling for a variable” means measuring extraneous variables and accounting for them statistically to remove their effects on other variables.

Researchers often model control variable data along with independent and dependent variable data in regression analyses and ANCOVAs . That way, you can isolate the control variable’s effects from the relationship between the variables of interest.

Control variables help you establish a correlational or causal relationship between variables by enhancing internal validity .

If you don’t control relevant extraneous variables , they may influence the outcomes of your study, and you may not be able to demonstrate that your results are really an effect of your independent variable .

A control variable is any variable that’s held constant in a research study. It’s not a variable of interest in the study, but it’s controlled because it could influence the outcomes.

Including mediators and moderators in your research helps you go beyond studying a simple relationship between two variables for a fuller picture of the real world. They are important to consider when studying complex correlational or causal relationships.

Mediators are part of the causal pathway of an effect, and they tell you how or why an effect takes place. Moderators usually help you judge the external validity of your study by identifying the limitations of when the relationship between variables holds.

If something is a mediating variable :

• It’s caused by the independent variable .
• It influences the dependent variable
• When it’s taken into account, the statistical correlation between the independent and dependent variables is higher than when it isn’t considered.

A confounder is a third variable that affects variables of interest and makes them seem related when they are not. In contrast, a mediator is the mechanism of a relationship between two variables: it explains the process by which they are related.

A mediator variable explains the process through which two variables are related, while a moderator variable affects the strength and direction of that relationship.

There are three key steps in systematic sampling :

• Define and list your population , ensuring that it is not ordered in a cyclical or periodic order.
• Decide on your sample size and calculate your interval, k , by dividing your population by your target sample size.
• Choose every k th member of the population as your sample.

Systematic sampling is a probability sampling method where researchers select members of the population at a regular interval – for example, by selecting every 15th person on a list of the population. If the population is in a random order, this can imitate the benefits of simple random sampling .

Yes, you can create a stratified sample using multiple characteristics, but you must ensure that every participant in your study belongs to one and only one subgroup. In this case, you multiply the numbers of subgroups for each characteristic to get the total number of groups.

For example, if you were stratifying by location with three subgroups (urban, rural, or suburban) and marital status with five subgroups (single, divorced, widowed, married, or partnered), you would have 3 x 5 = 15 subgroups.

You should use stratified sampling when your sample can be divided into mutually exclusive and exhaustive subgroups that you believe will take on different mean values for the variable that you’re studying.

Using stratified sampling will allow you to obtain more precise (with lower variance ) statistical estimates of whatever you are trying to measure.

For example, say you want to investigate how income differs based on educational attainment, but you know that this relationship can vary based on race. Using stratified sampling, you can ensure you obtain a large enough sample from each racial group, allowing you to draw more precise conclusions.

In stratified sampling , researchers divide subjects into subgroups called strata based on characteristics that they share (e.g., race, gender, educational attainment).

Once divided, each subgroup is randomly sampled using another probability sampling method.

Cluster sampling is more time- and cost-efficient than other probability sampling methods , particularly when it comes to large samples spread across a wide geographical area.

However, it provides less statistical certainty than other methods, such as simple random sampling , because it is difficult to ensure that your clusters properly represent the population as a whole.

There are three types of cluster sampling : single-stage, double-stage and multi-stage clustering. In all three types, you first divide the population into clusters, then randomly select clusters for use in your sample.

• In single-stage sampling , you collect data from every unit within the selected clusters.
• In double-stage sampling , you select a random sample of units from within the clusters.
• In multi-stage sampling , you repeat the procedure of randomly sampling elements from within the clusters until you have reached a manageable sample.

Cluster sampling is a probability sampling method in which you divide a population into clusters, such as districts or schools, and then randomly select some of these clusters as your sample.

The clusters should ideally each be mini-representations of the population as a whole.

If properly implemented, simple random sampling is usually the best sampling method for ensuring both internal and external validity . However, it can sometimes be impractical and expensive to implement, depending on the size of the population to be studied,

If you have a list of every member of the population and the ability to reach whichever members are selected, you can use simple random sampling.

The American Community Survey  is an example of simple random sampling . In order to collect detailed data on the population of the US, the Census Bureau officials randomly select 3.5 million households per year and use a variety of methods to convince them to fill out the survey.

Simple random sampling is a type of probability sampling in which the researcher randomly selects a subset of participants from a population . Each member of the population has an equal chance of being selected. Data is then collected from as large a percentage as possible of this random subset.

Quasi-experimental design is most useful in situations where it would be unethical or impractical to run a true experiment .

Quasi-experiments have lower internal validity than true experiments, but they often have higher external validity  as they can use real-world interventions instead of artificial laboratory settings.

A quasi-experiment is a type of research design that attempts to establish a cause-and-effect relationship. The main difference with a true experiment is that the groups are not randomly assigned.

Blinding is important to reduce research bias (e.g., observer bias , demand characteristics ) and ensure a study’s internal validity .

If participants know whether they are in a control or treatment group , they may adjust their behavior in ways that affect the outcome that researchers are trying to measure. If the people administering the treatment are aware of group assignment, they may treat participants differently and thus directly or indirectly influence the final results.

• In a single-blind study , only the participants are blinded.
• In a double-blind study , both participants and experimenters are blinded.
• In a triple-blind study , the assignment is hidden not only from participants and experimenters, but also from the researchers analyzing the data.

Blinding means hiding who is assigned to the treatment group and who is assigned to the control group in an experiment .

A true experiment (a.k.a. a controlled experiment) always includes at least one control group that doesn’t receive the experimental treatment.

However, some experiments use a within-subjects design to test treatments without a control group. In these designs, you usually compare one group’s outcomes before and after a treatment (instead of comparing outcomes between different groups).

For strong internal validity , it’s usually best to include a control group if possible. Without a control group, it’s harder to be certain that the outcome was caused by the experimental treatment and not by other variables.

Individual Likert-type questions are generally considered ordinal data , because the items have clear rank order, but don’t have an even distribution.

Overall Likert scale scores are sometimes treated as interval data. These scores are considered to have directionality and even spacing between them.

The type of data determines what statistical tests you should use to analyze your data.

A Likert scale is a rating scale that quantitatively assesses opinions, attitudes, or behaviors. It is made up of 4 or more questions that measure a single attitude or trait when response scores are combined.

To use a Likert scale in a survey , you present participants with Likert-type questions or statements, and a continuum of items, usually with 5 or 7 possible responses, to capture their degree of agreement.

In scientific research, concepts are the abstract ideas or phenomena that are being studied (e.g., educational achievement). Variables are properties or characteristics of the concept (e.g., performance at school), while indicators are ways of measuring or quantifying variables (e.g., yearly grade reports).

The process of turning abstract concepts into measurable variables and indicators is called operationalization .

There are various approaches to qualitative data analysis , but they all share five steps in common:

• Prepare and organize your data.
• Review and explore your data.
• Develop a data coding system.
• Assign codes to the data.
• Identify recurring themes.

The specifics of each step depend on the focus of the analysis. Some common approaches include textual analysis , thematic analysis , and discourse analysis .

There are five common approaches to qualitative research :

• Grounded theory involves collecting data in order to develop new theories.
• Ethnography involves immersing yourself in a group or organization to understand its culture.
• Narrative research involves interpreting stories to understand how people make sense of their experiences and perceptions.
• Phenomenological research involves investigating phenomena through people’s lived experiences.
• Action research links theory and practice in several cycles to drive innovative changes.

Hypothesis testing is a formal procedure for investigating our ideas about the world using statistics. It is used by scientists to test specific predictions, called hypotheses , by calculating how likely it is that a pattern or relationship between variables could have arisen by chance.

Operationalization means turning abstract conceptual ideas into measurable observations.

For example, the concept of social anxiety isn’t directly observable, but it can be operationally defined in terms of self-rating scores, behavioral avoidance of crowded places, or physical anxiety symptoms in social situations.

Before collecting data , it’s important to consider how you will operationalize the variables that you want to measure.

When conducting research, collecting original data has significant advantages:

• You can tailor data collection to your specific research aims (e.g. understanding the needs of your consumers or user testing your website)
• You can control and standardize the process for high reliability and validity (e.g. choosing appropriate measurements and sampling methods )

However, there are also some drawbacks: data collection can be time-consuming, labor-intensive and expensive. In some cases, it’s more efficient to use secondary data that has already been collected by someone else, but the data might be less reliable.

Data collection is the systematic process by which observations or measurements are gathered in research. It is used in many different contexts by academics, governments, businesses, and other organizations.

There are several methods you can use to decrease the impact of confounding variables on your research: restriction, matching, statistical control and randomization.

In restriction , you restrict your sample by only including certain subjects that have the same values of potential confounding variables.

In matching , you match each of the subjects in your treatment group with a counterpart in the comparison group. The matched subjects have the same values on any potential confounding variables, and only differ in the independent variable .

In statistical control , you include potential confounders as variables in your regression .

In randomization , you randomly assign the treatment (or independent variable) in your study to a sufficiently large number of subjects, which allows you to control for all potential confounding variables.

A confounding variable is closely related to both the independent and dependent variables in a study. An independent variable represents the supposed cause , while the dependent variable is the supposed effect . A confounding variable is a third variable that influences both the independent and dependent variables.

Failing to account for confounding variables can cause you to wrongly estimate the relationship between your independent and dependent variables.

To ensure the internal validity of your research, you must consider the impact of confounding variables. If you fail to account for them, you might over- or underestimate the causal relationship between your independent and dependent variables , or even find a causal relationship where none exists.

Yes, but including more than one of either type requires multiple research questions .

For example, if you are interested in the effect of a diet on health, you can use multiple measures of health: blood sugar, blood pressure, weight, pulse, and many more. Each of these is its own dependent variable with its own research question.

You could also choose to look at the effect of exercise levels as well as diet, or even the additional effect of the two combined. Each of these is a separate independent variable .

To ensure the internal validity of an experiment , you should only change one independent variable at a time.

No. The value of a dependent variable depends on an independent variable, so a variable cannot be both independent and dependent at the same time. It must be either the cause or the effect, not both!

You want to find out how blood sugar levels are affected by drinking diet soda and regular soda, so you conduct an experiment .

• The type of soda – diet or regular – is the independent variable .
• The level of blood sugar that you measure is the dependent variable – it changes depending on the type of soda.

Determining cause and effect is one of the most important parts of scientific research. It’s essential to know which is the cause – the independent variable – and which is the effect – the dependent variable.

In non-probability sampling , the sample is selected based on non-random criteria, and not every member of the population has a chance of being included.

Common non-probability sampling methods include convenience sampling , voluntary response sampling, purposive sampling , snowball sampling, and quota sampling .

Probability sampling means that every member of the target population has a known chance of being included in the sample.

Probability sampling methods include simple random sampling , systematic sampling , stratified sampling , and cluster sampling .

Using careful research design and sampling procedures can help you avoid sampling bias . Oversampling can be used to correct undercoverage bias .

Some common types of sampling bias include self-selection bias , nonresponse bias , undercoverage bias , survivorship bias , pre-screening or advertising bias, and healthy user bias.

Sampling bias is a threat to external validity – it limits the generalizability of your findings to a broader group of people.

A sampling error is the difference between a population parameter and a sample statistic .

A statistic refers to measures about the sample , while a parameter refers to measures about the population .

Populations are used when a research question requires data from every member of the population. This is usually only feasible when the population is small and easily accessible.

Samples are used to make inferences about populations . Samples are easier to collect data from because they are practical, cost-effective, convenient, and manageable.

There are seven threats to external validity : selection bias , history, experimenter effect, Hawthorne effect , testing effect, aptitude-treatment and situation effect.

The two types of external validity are population validity (whether you can generalize to other groups of people) and ecological validity (whether you can generalize to other situations and settings).

The external validity of a study is the extent to which you can generalize your findings to different groups of people, situations, and measures.

Cross-sectional studies cannot establish a cause-and-effect relationship or analyze behavior over a period of time. To investigate cause and effect, you need to do a longitudinal study or an experimental study .

Cross-sectional studies are less expensive and time-consuming than many other types of study. They can provide useful insights into a population’s characteristics and identify correlations for further research.

Sometimes only cross-sectional data is available for analysis; other times your research question may only require a cross-sectional study to answer it.

Longitudinal studies can last anywhere from weeks to decades, although they tend to be at least a year long.

The 1970 British Cohort Study , which has collected data on the lives of 17,000 Brits since their births in 1970, is one well-known example of a longitudinal study .

Longitudinal studies are better to establish the correct sequence of events, identify changes over time, and provide insight into cause-and-effect relationships, but they also tend to be more expensive and time-consuming than other types of studies.

Longitudinal studies and cross-sectional studies are two different types of research design . In a cross-sectional study you collect data from a population at a specific point in time; in a longitudinal study you repeatedly collect data from the same sample over an extended period of time.

There are eight threats to internal validity : history, maturation, instrumentation, testing, selection bias , regression to the mean, social interaction and attrition .

Internal validity is the extent to which you can be confident that a cause-and-effect relationship established in a study cannot be explained by other factors.

In mixed methods research , you use both qualitative and quantitative data collection and analysis methods to answer your research question .

The research methods you use depend on the type of data you need to answer your research question .

• If you want to measure something or test a hypothesis , use quantitative methods . If you want to explore ideas, thoughts and meanings, use qualitative methods .
• If you want to analyze a large amount of readily-available data, use secondary data. If you want data specific to your purposes with control over how it is generated, collect primary data.
• If you want to establish cause-and-effect relationships between variables , use experimental methods. If you want to understand the characteristics of a research subject, use descriptive methods.

A confounding variable , also called a confounder or confounding factor, is a third variable in a study examining a potential cause-and-effect relationship.

A confounding variable is related to both the supposed cause and the supposed effect of the study. It can be difficult to separate the true effect of the independent variable from the effect of the confounding variable.

In your research design , it’s important to identify potential confounding variables and plan how you will reduce their impact.

Discrete and continuous variables are two types of quantitative variables :

• Discrete variables represent counts (e.g. the number of objects in a collection).
• Continuous variables represent measurable amounts (e.g. water volume or weight).

Quantitative variables are any variables where the data represent amounts (e.g. height, weight, or age).

Categorical variables are any variables where the data represent groups. This includes rankings (e.g. finishing places in a race), classifications (e.g. brands of cereal), and binary outcomes (e.g. coin flips).

You need to know what type of variables you are working with to choose the right statistical test for your data and interpret your results .

You can think of independent and dependent variables in terms of cause and effect: an independent variable is the variable you think is the cause , while a dependent variable is the effect .

In an experiment, you manipulate the independent variable and measure the outcome in the dependent variable. For example, in an experiment about the effect of nutrients on crop growth:

• The  independent variable  is the amount of nutrients added to the crop field.
• The  dependent variable is the biomass of the crops at harvest time.

Defining your variables, and deciding how you will manipulate and measure them, is an important part of experimental design .

Experimental design means planning a set of procedures to investigate a relationship between variables . To design a controlled experiment, you need:

• A testable hypothesis
• At least one independent variable that can be precisely manipulated
• At least one dependent variable that can be precisely measured

When designing the experiment, you decide:

• How you will manipulate the variable(s)
• How you will control for any potential confounding variables
• How many subjects or samples will be included in the study
• How subjects will be assigned to treatment levels

Experimental design is essential to the internal and external validity of your experiment.

I nternal validity is the degree of confidence that the causal relationship you are testing is not influenced by other factors or variables .

External validity is the extent to which your results can be generalized to other contexts.

The validity of your experiment depends on your experimental design .

Reliability and validity are both about how well a method measures something:

• Reliability refers to the  consistency of a measure (whether the results can be reproduced under the same conditions).
• Validity   refers to the  accuracy of a measure (whether the results really do represent what they are supposed to measure).

If you are doing experimental research, you also have to consider the internal and external validity of your experiment.

A sample is a subset of individuals from a larger population . Sampling means selecting the group that you will actually collect data from in your research. For example, if you are researching the opinions of students in your university, you could survey a sample of 100 students.

In statistics, sampling allows you to test a hypothesis about the characteristics of a population.

Quantitative research deals with numbers and statistics, while qualitative research deals with words and meanings.

Quantitative methods allow you to systematically measure variables and test hypotheses . Qualitative methods allow you to explore concepts and experiences in more detail.

Methodology refers to the overarching strategy and rationale of your research project . It involves studying the methods used in your field and the theories or principles behind them, in order to develop an approach that matches your objectives.

Methods are the specific tools and procedures you use to collect and analyze data (for example, experiments, surveys , and statistical tests ).

In shorter scientific papers, where the aim is to report the findings of a specific study, you might simply describe what you did in a methods section .

In a longer or more complex research project, such as a thesis or dissertation , you will probably include a methodology section , where you explain your approach to answering the research questions and cite relevant sources to support your choice of methods.

Ask our team

Want to contact us directly? No problem.  We  are always here for you.

• Email [email protected]
• Start live chat
• Call +1 (510) 822-8066
• WhatsApp +31 20 261 6040

Our team helps students graduate by offering:

• A world-class citation generator
• Plagiarism Checker software powered by Turnitin
• Innovative Citation Checker software
• Professional proofreading services
• Over 300 helpful articles about academic writing, citing sources, plagiarism, and more

Scribbr specializes in editing study-related documents . We proofread:

• PhD dissertations
• Research proposals
• Personal statements
• Admission essays
• Motivation letters
• Reflection papers
• Journal articles
• Capstone projects

Scribbr’s Plagiarism Checker is powered by elements of Turnitin’s Similarity Checker , namely the plagiarism detection software and the Internet Archive and Premium Scholarly Publications content databases .

The add-on AI detector is powered by Scribbr’s proprietary software.

The Scribbr Citation Generator is developed using the open-source Citation Style Language (CSL) project and Frank Bennett’s citeproc-js . It’s the same technology used by dozens of other popular citation tools, including Mendeley and Zotero.

You can find all the citation styles and locales used in the Scribbr Citation Generator in our publicly accessible repository on Github .

Want to create or adapt books like this? Learn more about how Pressbooks supports open publishing practices.

30 8.1 Experimental design: What is it and when should it be used?

Learning objectives.

• Define experiment
• Identify the core features of true experimental designs
• Describe the difference between an experimental group and a control group
• Identify and describe the various types of true experimental designs

Experiments are an excellent data collection strategy for social workers wishing to observe the effects of a clinical intervention or social welfare program. Understanding what experiments are and how they are conducted is useful for all social scientists, whether they actually plan to use this methodology or simply aim to understand findings from experimental studies. An experiment is a method of data collection designed to test hypotheses under controlled conditions. In social scientific research, the term experiment has a precise meaning and should not be used to describe all research methodologies.

Experiments have a long and important history in social science. Behaviorists such as John Watson, B. F. Skinner, Ivan Pavlov, and Albert Bandura used experimental design to demonstrate the various types of conditioning. Using strictly controlled environments, behaviorists were able to isolate a single stimulus as the cause of measurable differences in behavior or physiological responses. The foundations of social learning theory and behavior modification are found in experimental research projects. Moreover, behaviorist experiments brought psychology and social science away from the abstract world of Freudian analysis and towards empirical inquiry, grounded in real-world observations and objectively-defined variables. Experiments are used at all levels of social work inquiry, including agency-based experiments that test therapeutic interventions and policy experiments that test new programs.

Several kinds of experimental designs exist. In general, designs considered to be true experiments contain three basic key features:

• random assignment of participants into experimental and control groups
• a “treatment” (or intervention) provided to the experimental group
• measurement of the effects of the treatment in a post-test administered to both groups

Some true experiments are more complex.  Their designs can also include a pre-test and can have more than two groups, but these are the minimum requirements for a design to be a true experiment.

Experimental and control groups

In a true experiment, the effect of an intervention is tested by comparing two groups: one that is exposed to the intervention (the experimental group , also known as the treatment group) and another that does not receive the intervention (the control group ). Importantly, participants in a true experiment need to be randomly assigned to either the control or experimental groups. Random assignment uses a random number generator or some other random process to assign people into experimental and control groups. Random assignment is important in experimental research because it helps to ensure that the experimental group and control group are comparable and that any differences between the experimental and control groups are due to random chance. We will address more of the logic behind random assignment in the next section.

Treatment or intervention

In an experiment, the independent variable is receiving the intervention being tested—for example, a therapeutic technique, prevention program, or access to some service or support. It is less common in of social work research, but social science research may also have a stimulus, rather than an intervention as the independent variable. For example, an electric shock or a reading about death might be used as a stimulus to provoke a response.

In some cases, it may be immoral to withhold treatment completely from a control group within an experiment. If you recruited two groups of people with severe addiction and only provided treatment to one group, the other group would likely suffer. For these cases, researchers use a control group that receives “treatment as usual.” Experimenters must clearly define what treatment as usual means. For example, a standard treatment in substance abuse recovery is attending Alcoholics Anonymous or Narcotics Anonymous meetings. A substance abuse researcher conducting an experiment may use twelve-step programs in their control group and use their experimental intervention in the experimental group. The results would show whether the experimental intervention worked better than normal treatment, which is useful information.

The dependent variable is usually the intended effect the researcher wants the intervention to have. If the researcher is testing a new therapy for individuals with binge eating disorder, their dependent variable may be the number of binge eating episodes a participant reports. The researcher likely expects her intervention to decrease the number of binge eating episodes reported by participants. Thus, she must, at a minimum, measure the number of episodes that occur after the intervention, which is the post-test .  In a classic experimental design, participants are also given a pretest to measure the dependent variable before the experimental treatment begins.

Types of experimental design

Let’s put these concepts in chronological order so we can better understand how an experiment runs from start to finish. Once you’ve collected your sample, you’ll need to randomly assign your participants to the experimental group and control group. In a common type of experimental design, you will then give both groups your pretest, which measures your dependent variable, to see what your participants are like before you start your intervention. Next, you will provide your intervention, or independent variable, to your experimental group, but not to your control group. Many interventions last a few weeks or months to complete, particularly therapeutic treatments. Finally, you will administer your post-test to both groups to observe any changes in your dependent variable. What we’ve just described is known as the classical experimental design and is the simplest type of true experimental design. All of the designs we review in this section are variations on this approach. Figure 8.1 visually represents these steps.

An interesting example of experimental research can be found in Shannon K. McCoy and Brenda Major’s (2003) study of people’s perceptions of prejudice. In one portion of this multifaceted study, all participants were given a pretest to assess their levels of depression. No significant differences in depression were found between the experimental and control groups during the pretest. Participants in the experimental group were then asked to read an article suggesting that prejudice against their own racial group is severe and pervasive, while participants in the control group were asked to read an article suggesting that prejudice against a racial group other than their own is severe and pervasive. Clearly, these were not meant to be interventions or treatments to help depression, but were stimuli designed to elicit changes in people’s depression levels. Upon measuring depression scores during the post-test period, the researchers discovered that those who had received the experimental stimulus (the article citing prejudice against their same racial group) reported greater depression than those in the control group. This is just one of many examples of social scientific experimental research.

In addition to classic experimental design, there are two other ways of designing experiments that are considered to fall within the purview of “true” experiments (Babbie, 2010; Campbell & Stanley, 1963).  The posttest-only control group design is almost the same as classic experimental design, except it does not use a pretest. Researchers who use posttest-only designs want to eliminate testing effects , in which participants’ scores on a measure change because they have already been exposed to it. If you took multiple SAT or ACT practice exams before you took the real one you sent to colleges, you’ve taken advantage of testing effects to get a better score. Considering the previous example on racism and depression, participants who are given a pretest about depression before being exposed to the stimulus would likely assume that the intervention is designed to address depression. That knowledge could cause them to answer differently on the post-test than they otherwise would. In theory, as long as the control and experimental groups have been determined randomly and are therefore comparable, no pretest is needed. However, most researchers prefer to use pretests in case randomization did not result in equivalent groups and to help assess change over time within both the experimental and control groups.

Researchers wishing to account for testing effects but also gather pretest data can use a Solomon four-group design. In the Solomon four-group design , the researcher uses four groups. Two groups are treated as they would be in a classic experiment—pretest, experimental group intervention, and post-test. The other two groups do not receive the pretest, though one receives the intervention. All groups are given the post-test. Table 8.1 illustrates the features of each of the four groups in the Solomon four-group design. By having one set of experimental and control groups that complete the pretest (Groups 1 and 2) and another set that does not complete the pretest (Groups 3 and 4), researchers using the Solomon four-group design can account for testing effects in their analysis.

Solomon four-group designs are challenging to implement in the real world because they are time- and resource-intensive. Researchers must recruit enough participants to create four groups and implement interventions in two of them.

Overall, true experimental designs are sometimes difficult to implement in a real-world practice environment. It may be impossible to withhold treatment from a control group or randomly assign participants in a study. In these cases, pre-experimental and quasi-experimental designs–which we  will discuss in the next section–can be used.  However, the differences in rigor from true experimental designs leave their conclusions more open to critique.

Experimental design in macro-level research

You can imagine that social work researchers may be limited in their ability to use random assignment when examining the effects of governmental policy on individuals.  For example, it is unlikely that a researcher could randomly assign some states to implement decriminalization of recreational marijuana and some states not to in order to assess the effects of the policy change.  There are, however, important examples of policy experiments that use random assignment, including the Oregon Medicaid experiment. In the Oregon Medicaid experiment, the wait list for Oregon was so long, state officials conducted a lottery to see who from the wait list would receive Medicaid (Baicker et al., 2013).  Researchers used the lottery as a natural experiment that included random assignment. People selected to be a part of Medicaid were the experimental group and those on the wait list were in the control group. There are some practical complications macro-level experiments, just as with other experiments.  For example, the ethical concern with using people on a wait list as a control group exists in macro-level research just as it does in micro-level research.

Key Takeaways

• True experimental designs require random assignment.
• Control groups do not receive an intervention, and experimental groups receive an intervention.
• The basic components of a true experiment include a pretest, posttest, control group, and experimental group.
• Testing effects may cause researchers to use variations on the classic experimental design.
• Classic experimental design- uses random assignment, an experimental and control group, as well as pre- and posttesting
• Control group- the group in an experiment that does not receive the intervention
• Experiment- a method of data collection designed to test hypotheses under controlled conditions
• Experimental group- the group in an experiment that receives the intervention
• Posttest- a measurement taken after the intervention
• Posttest-only control group design- a type of experimental design that uses random assignment, and an experimental and control group, but does not use a pretest
• Pretest- a measurement taken prior to the intervention
• Random assignment-using a random process to assign people into experimental and control groups
• Solomon four-group design- uses random assignment, two experimental and two control groups, pretests for half of the groups, and posttests for all
• Testing effects- when a participant’s scores on a measure change because they have already been exposed to it
• True experiments- a group of experimental designs that contain independent and dependent variables, pretesting and post testing, and experimental and control groups

Image attributions

exam scientific experiment by mohamed_hassan CC-0

Foundations of Social Work Research Copyright © 2020 by Rebecca L. Mauldin is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License , except where otherwise noted.

Share This Book

• Activities, Experiments, Online Games, Visual Aids
• Activities, Experiments, and Investigations
• Experimental Design and the Scientific Method

Experimental Design - Independent, Dependent, and Controlled Variables

To view these resources with no ads, please login or subscribe to help support our content development. school subscriptions can access more than 175 downloadable unit bundles in our store for free (a value of $1,500). district subscriptions provide huge group discounts for their schools. email for a quote: [email protected] ..

Scientific experiments are meant to show cause and effect of a phenomena (relationships in nature).  The “ variables ” are any factor, trait, or condition that can be changed in the experiment and that can have an effect on the outcome of the experiment.

An experiment can have three kinds of variables: i ndependent, dependent, and controlled .

• The independent variable is one single factor that is changed by the scientist followed by observation to watch for changes. It is important that there is just one independent variable, so that results are not confusing.
• The dependent variable is the factor that changes as a result of the change to the independent variable.
• The controlled variables (or constant variables) are factors that the scientist wants to remain constant if the experiment is to show accurate results. To be able to measure results, each of the variables must be able to be measured.

For example, let’s design an experiment with two plants sitting in the sun side by side. The controlled variables (or constants) are that at the beginning of the experiment, the plants are the same size, get the same amount of sunlight, experience the same ambient temperature and are in the same amount and consistency of soil (the weight of the soil and container should be measured before the plants are added). The independent variable is that one plant is getting watered (1 cup of water) every day and one plant is getting watered (1 cup of water) once a week. The dependent variables are the changes in the two plants that the scientist observes over time.

Can you describe the dependent variable that may result from this experiment? After four weeks, the dependent variable may be that one plant is taller, heavier and more developed than the other. These results can be recorded and graphed by measuring and comparing both plants’ height, weight (removing the weight of the soil and container recorded beforehand) and a comparison of observable foliage.

Using What You Learned: Design another experiment using the two plants, but change the independent variable. Can you describe the dependent variable that may result from this new experiment?

Think of another simple experiment and name the independent, dependent, and controlled variables. Use the graphic organizer included in the PDF below to organize your experiment's variables.

Please Login or Subscribe to access downloadable content.

Citing Research References

When you research information you must cite the reference. Citing for websites is different from citing from books, magazines and periodicals. The style of citing shown here is from the MLA Style Citations (Modern Language Association).

When citing a WEBSITE the general format is as follows. Author Last Name, First Name(s). "Title: Subtitle of Part of Web Page, if appropriate." Title: Subtitle: Section of Page if appropriate. Sponsoring/Publishing Agency, If Given. Additional significant descriptive information. Date of Electronic Publication or other Date, such as Last Updated. Day Month Year of access < URL >.

Here is an example of citing this page:

Amsel, Sheri. "Experimental Design - Independent, Dependent, and Controlled Variables" Exploring Nature Educational Resource ©2005-2024. March 25, 2024 < http://www.exploringnature.org/db/view/Experimental-Design-Independent-Dependent-and-Controlled-Variables >

Exploringnature.org has more than 2,000 illustrated animals. Read about them, color them, label them, learn to draw them.

Inclined Plane Experiment

Parabola experiment, pendulum experiment.

Controlled Experiment

Saul McLeod, PhD

Editor-in-Chief for Simply Psychology

BSc (Hons) Psychology, MRes, PhD, University of Manchester

Saul McLeod, PhD., is a qualified psychology teacher with over 18 years of experience in further and higher education. He has been published in peer-reviewed journals, including the Journal of Clinical Psychology.

Learn about our Editorial Process

Olivia Guy-Evans, MSc

Associate Editor for Simply Psychology

BSc (Hons) Psychology, MSc Psychology of Education

Olivia Guy-Evans is a writer and associate editor for Simply Psychology. She has previously worked in healthcare and educational sectors.

This is when a hypothesis is scientifically tested.

In a controlled experiment, an independent variable (the cause) is systematically manipulated, and the dependent variable (the effect) is measured; any extraneous variables are controlled.

The researcher can operationalize (i.e., define) the studied variables so they can be objectively measured. The quantitative data can be analyzed to see if there is a difference between the experimental and control groups.

What is the control group?

In experiments scientists compare a control group and an experimental group that are identical in all respects, except for one difference – experimental manipulation.

Unlike the experimental group, the control group is not exposed to the independent variable under investigation and so provides a baseline against which any changes in the experimental group can be compared.

Since experimental manipulation is the only difference between the experimental and control groups, we can be sure that any differences between the two are due to experimental manipulation rather than chance.

Randomly allocating participants to independent variable groups means that all participants should have an equal chance of participating in each condition.

The principle of random allocation is to avoid bias in how the experiment is carried out and limit the effects of participant variables.

What are extraneous variables?

The researcher wants to ensure that the manipulation of the independent variable has changed the changes in the dependent variable.

Hence, all the other variables that could affect the dependent variable to change must be controlled. These other variables are called extraneous or confounding variables.

Extraneous variables should be controlled were possible, as they might be important enough to provide alternative explanations for the effects.

In practice, it would be difficult to control all the variables in a child’s educational achievement. For example, it would be difficult to control variables that have happened in the past.

A researcher can only control the current environment of participants, such as time of day and noise levels.

Why conduct controlled experiments?

Scientists use controlled experiments because they allow for precise control of extraneous and independent variables. This allows a cause-and-effect relationship to be established.

Controlled experiments also follow a standardized step-by-step procedure. This makes it easy for another researcher to replicate the study.

Key Terminology

Experimental group.

The group being treated or otherwise manipulated for the sake of the experiment.

Control Group

They receive no treatment and are used as a comparison group.

Ecological validity

The degree to which an investigation represents real-life experiences.

Experimenter effects

These are the ways that the experimenter can accidentally influence the participant through their appearance or behavior.

Demand characteristics

The clues in an experiment lead the participants to think they know what the researcher is looking for (e.g., the experimenter’s body language).

Independent variable (IV)

The variable the experimenter manipulates (i.e., changes) – is assumed to have a direct effect on the dependent variable.

Dependent variable (DV)

Variable the experimenter measures. This is the outcome (i.e., the result) of a study.

Extraneous variables (EV)

All variables that are not independent variables but could affect the results (DV) of the experiment. Extraneous variables should be controlled where possible.

Confounding variables

Variable(s) that have affected the results (DV), apart from the IV. A confounding variable could be an extraneous variable that has not been controlled.

Random Allocation

Randomly allocating participants to independent variable conditions means that all participants should have an equal chance of participating in each condition.

Order effects

Changes in participants’ performance due to their repeating the same or similar test more than once. Examples of order effects include:

(i) practice effect: an improvement in performance on a task due to repetition, for example, because of familiarity with the task;

(ii) fatigue effect: a decrease in performance of a task due to repetition, for example, because of boredom or tiredness.

What is the control in an experiment?

In an experiment , the control is a standard or baseline group not exposed to the experimental treatment or manipulation. It serves as a comparison group to the experimental group, which does receive the treatment or manipulation.

The control group helps to account for other variables that might influence the outcome, allowing researchers to attribute differences in results more confidently to the experimental treatment.

Establishing a cause-and-effect relationship between the manipulated variable (independent variable) and the outcome (dependent variable) is critical in establishing a cause-and-effect relationship between the manipulated variable.

What is the purpose of controlling the environment when testing a hypothesis?

Controlling the environment when testing a hypothesis aims to eliminate or minimize the influence of extraneous variables. These variables other than the independent variable might affect the dependent variable, potentially confounding the results.

By controlling the environment, researchers can ensure that any observed changes in the dependent variable are likely due to the manipulation of the independent variable, not other factors.

This enhances the experiment’s validity, allowing for more accurate conclusions about cause-and-effect relationships.

It also improves the experiment’s replicability, meaning other researchers can repeat the experiment under the same conditions to verify the results.

Why are hypotheses important to controlled experiments?

Hypotheses are crucial to controlled experiments because they provide a clear focus and direction for the research. A hypothesis is a testable prediction about the relationship between variables.

It guides the design of the experiment, including what variables to manipulate (independent variables) and what outcomes to measure (dependent variables).

The experiment is then conducted to test the validity of the hypothesis. If the results align with the hypothesis, they provide evidence supporting it.

The hypothesis may be revised or rejected if the results do not align. Thus, hypotheses are central to the scientific method, driving the iterative inquiry, experimentation, and knowledge advancement process.

What is the experimental method?

The experimental method is a systematic approach in scientific research where an independent variable is manipulated to observe its effect on a dependent variable, under controlled conditions.

Microsoft ends support for Internet Explorer on June 16, 2022. We recommend using one of the browsers listed below.

• Microsoft Edge（Latest version） 
• Mozilla Firefox（Latest version） 
• Google Chrome（Latest version） 
• Apple Safari（Latest version） 

Please contact your browser provider for download and installation instructions.

• Press Release
• World's first and most accurate field demonstration of end-to-end visualization of fiber-optic link without measuring equipment Enables fast optical connection and maintenance through the realization of the digital twin of optical network

August 20, 2024

NTT Corporation

News Highlights:

• ◆ Developed a technology to visualize optical signal power over the entire fiber-optic link using optical transceivers installed at the end of an optical network in just a few minutes
• ◆ The world's first and most accurate demonstration in a field environment simulating a commercial network
• ◆ This technology makes it possible to run a diagnosis on the entire fiber-optic link including customer sites without using a dedicated measuring instrument, significantly reducing the time required for designing and maintaining optical networks

TOKYO - August 20, 2024 - NTT Corporation (Headquarters: Chiyoda Ward, Tokyo; Representative Member of the Board and President: Akira Shimada; hereinafter "NTT") has developed technology to visualize the state of end-to-end fiber-optic links without using measuring equipment and succeeded for the first time in demonstrating the world's highest accuracy in a North American field-deployed environment simulating a commercial network. This technology will advance the realization of digital twins 1 in optical networks and is expected to be applied to the fast establishment and maintenance of end-to-end optical connections including IOWN 2 APN 3 . 　These results were presented in the Postdeadline Paper Session [1] at the OFC2024 (The Optical Fiber Communication Conference and Exhibition), the largest global conference and exhibition for optical communications held in San Diego, California, from March 24-28, 2024.

1. Background

NTT Group is developing the IOWN APN (All-Photonics Network) which is a next-generation infrastructure that enables high-capacity, low-latency, and low power consumption communications through end-to-end optical connections without converting optical signals into electrical signals. To maximize the data transmission capacity of optical networks, it is necessary to closely monitor and control the state of fiber-optic links, such as optical signal power. To achieve this, the application of digital twins in optical networks is being widely studied. 　The digital twin of an optical network is a virtual optical network reproduced in cyberspace. By analyzing and predicting its optical transmission performance, it is possible to quickly predict failures and maximize the data transmission capacity of a real optical network. However, there are currently two issues to be addressed in the implementation of digital twins. First, to precisely replicate a real optical network, it is necessary to place a large number of sensors or dedicated measuring instruments at every optical node, which increases the time and cost of sensor installation/operation. In some cases, when network faults occur, highly skilled workers are required to perform on-site measurements using specialized instruments such as optical time domain reflectometers (OTDR) 4 . Second, when optical connections are made between remote user locations using IOWN APN, the monitoring range of the fiber-optic link must be extended to the user sites. In such an optical network covering multiple organizations, it becomes difficult to access sensor information such as optical signal power beyond administrative boundaries due to security issues.

2. Result of the research

The three main results of this research are as follows.

• Development of Digital Longitudinal Monitoring (DLM) [2], which visualizes the end-to-end optical signal power along an fiber-optic link solely from the signal reaching an optical receiver installed at network endpoints in only a few minutes without the use of specialized measuring instruments
• Development of a four-dimensional optical power visualization technology that extends the visualization of optical signal power not only in the direction of distance but also in the time, frequency, and polarization (Figure 2).
• The world's first successful demonstration with the highest accuracy using North American field-deployed optical fiber and commercial optical transceiver [3] in a joint experiment with Duke University and NEC Laboratories America, Inc. (Figure 3).

These results show that the measurement of the state of fiber-optic links, which is necessary for the construction of an optical network, can be performed only with optical transceivers by using DLM technology. This enables the simultaneous measurement of all optical fibers and amplifiers between customer sites without the need for dedicated measuring instruments, greatly reducing the time required to design optical connections and identify abnormalities [4].

<Details of the developed technology>

( 1 )  digital longitudinal monitoring (dlm) technology.

This DLM technology applies advanced digital signal processing to the received signal waveform reaching an optical receiver to visualize the optical power distributed in the longitudinal direction of the fiber-optic link (Figure 1). In general, it is extremely difficult to find distributed parameters inside a system solely from the input and output waveforms of the system, as often known as ill-posed problems. To solve this issue, NTT focused on the fact that the propagation of optical signals in optical fibers follows the nonlinear Schrödinger equation 5 , and mathematically formulated the problem of visualizing optical power for the first time in the world as an inverse problem, and succeeded in deriving a solution. This makes it possible to visualize optical power at high speed and with high accuracy. This technology was presented as a Postdeadline paper [1] at the global conference OFC2024 and was also exhibited using the live demonstration network "OFCnet" at the conference exhibition [5]. After the presentation and exhibition, NTT has continued its development efforts, further refining this technology toward practical application.

( 2 )  Four-dimensional optical power visualization technology

In addition to the visualization of optical signal power in the distance direction, we succeeded in developing a four-dimensional DLM technology that extends in the polarization, frequency, and time directions, and demonstrated it in the same field environment (Figure 2). This dimension expansion makes it possible to locate multiple types of anomalies in an fiber-optic link. 　The details of optical power visualization technology for polarization, frequency, and time directions are as follows.

• Polarization direction: By adopting the Manakov equation 6 as a model to describe dual-polarization transmission in optical fibers, the optical power distribution of horizontally and vertically polarized signals can be visualized independently (Figure 2, upper right column). This makes it possible to measure the distribution of polarization dependent loss (PDL) 7 , which was not possible in conventional optical networks [6].
• Frequency direction: By performing DLM using optical signals of multiple frequency channels in wavelength division multiplexing (WDM) 8 transmission systems, it became possible to obtain optical power distribution along the frequency axis at an arbitrary distance (Figure 2, middle right). Consequently, this enables the localization of anomalies in frequency characteristics of optical amplifiers and detailed monitoring of optical power transitions between signals due to Raman scattering 9 , which will become apparent in next-generation wideband optical transmission systems [7].
• Time direction: By implementing the high-speed waveform acquisition function in the optical transceiver, the time variation of optical signal power can be continuously visualized from the received signal waveform. As a result, the location of the cause of the time fluctuation of the optical power generated in the fiber optic link, such as the bending loss of the optical fiber by the operator, can be identified. (Figure 2, lower right)

3．Outline of the demonstration experiment

In this experiment, NTT demonstrated DLM technology in a field environment using optical fibers and commercial optical transceivers installed in Durham, North Carolina, U.S. [3] (Figure 3). This experiment was conducted jointly by NTT, Duke University, and NEC Laboratories America Inc., with Duke University providing field-installed optical fibers and laboratory equipment, and NEC Laboratories America Inc., providing laboratory equipment and optimization. In addition to using field-deployed optical fibers, this demonstration experiment was successful under conditions simulating a commercial optical network in which high-density WDM transmission 8 is carried out using 800Gbps commercial optical transceivers, demonstrating the feasibility of this technology.

This technology is expected to diagnose an fiber-optic link in just a few minutes without using a dedicated measuring instrument, realizing rapid optical connection and maintenance. To further develop IOWN APN, NTT will advance its proprietary optical network visualization technology, and research and development to realize the autonomous operation of optical networks using digital twins.

[Reference]

[1] T. Sasai, G. Borraccini, Y. K. Huang, H. Nishizawa, Z. Wang, T. Chen, Y. Sone, T. Matsumura, M. Nakamura, E. Yamazaki, and Y. Kisaka, "4D Optical Link Tomography: First Field Demonstration of Autonomous Transponder Capable of Distance, Time, Frequency, and Polarization Resolved Monitoring," Optical Fiber Communication Conference and Exhibition (OFC), Th4B.7, 2024.

[2] T. Sasai, M. Nakamura, E. Yamazaki, S. Yamamoto, H. Nishizawa, and Y. Kisaka, "Digital Longitudinal Monitoring of Optical Fiber Communication Link," Journal of Lightwave Technology, vol. 40, no. 8, pp. 2390-2408,2022.

[4] News release "Establishment and validation of optical wavelength path provisioning technology based on IOWN APN architecture for data center exchange services" https://group.ntt/en/newsrelease/2023/10/13/231013a.html

[5] News release "400Gbps/800Gbps IOWN APN demonstration at OFC2024 by multi-vendor products leveraging photonics-electronics convergence device and open standards" https://group.ntt/en/newsrelease/2024/03/26/240326a.html

[6] M. Takahashi, T. Sasai, E. Yamazaki and Y. Kisaka, "Monitoring PDL Value and Location Using DSP-Based Longitudinal Power Profile Estimation," Journal of Lightwave Technology, (early access).

[7] R. Kaneko, T. Sasai, F. Hamaoka, M. Nakamura, and E. Yamazaki, "Fiber-Longitudinal Monitoring of Inter-band-SRS-induced Power Transition in S+C+L WDM Transmission," Optical Fiber Communication Conference and Exhibition (OFC), W1B.4, 2024.

2. Innovative Optical and Wireless Network (IOWN) A network and information processing infrastructure including devices that can provide high-speed, large-capacity communications and enormous computing resources by optimizing both the individual and the entire system based on various information and utilizing innovative technologies centered on optics. NTT News Release: "NTT Technology Report for Smart World: What's IOWN?" https://group.ntt/jp/newsrelease/2019/05/09/190509b.html

4. Optical time domain reflectometer (OTDR) An instrument that measures the loss of an optical fiber in a distributed manner by measuring the time it takes for light to enter from one end of the optical fiber and to reflect back in the optical fiber.

5. Nonlinear Schrodinger equation A partial differential equation that a single polarization of light follows as it propagates through an optical fiber.

6. Manakov equation A partial differential equation that two orthogonally polarized lights follows as they propagate through an optical fiber.

7. Polarization dependent loss (PDL) A phenomenon that causes different losses depending on the polarization state of light. In polarization-multiplexed optical transmission, PDL degrades signal quality and causes an increase in the error rate of data.

8. Wavelength division multiplexing (WDM) A method for simultaneously transmitting multiple different wavelengths on an optical transmission line by using the property that different wavelengths do not interfere with each other. Especially, the WDM which realizes the large capacity optical transmission by densely multiplexing the wavelength channels is called Dense WDM (DWDM).

9. Raman scattering A nonlinear scattering phenomenon that occurs when light enters a substance. In optical fiber communication, it is applied to a Raman amplifier for realizing long-distance transmission, while in wide-band optical signal transmission, it introduces issue that the design of a transmission system becomes complicated because of the transition of optical power from a shorter wavelength to a longer wavelength optical signal.

NTT contributes to a sustainable society through the power of innovation. We are a leading global technology company providing services to consumers and businesses as a mobile operator, infrastructure, networks, applications, and consulting provider. Our offerings include digital business consulting, managed application services, workplace and cloud solutions, data center and edge computing, all supported by our deep global industry expertise. We are over $97B in revenue and 330,000 employees, with $3.6B in annual R&D investments. Our operations span across 80+ countries and regions, allowing us to serve clients in over 190 of them. We serve over 75% of Fortune Global 100 companies, thousands of other enterprise and government clients and millions of consumers.

Media contact

NTT Science and Core Technology Laboratory Group Public Relations [email protected]

Information is current as of the date of issue of the individual press release. Please be advised that information may be outdated after that point.

WEB media that thinks about the future with NTT

August 9, 2024

Upgrade 2024: Kindness

August 1, 2024

[Report] The latest communication technology of the future is exhibited and open to the public! Open House 2024

July 26, 2024

Upgrade 2024: Beauty

NTT R&D Website

NTT Japan Rugby League One

Global Business

NTT Communications

What are Controlled Experiments?

Determining Cause and Effect

skynesher / Getty Images

• Research, Samples, and Statistics
• Key Concepts
• Major Sociologists
• News & Issues
• Recommended Reading
• Archaeology

A controlled experiment is a highly focused way of collecting data and is especially useful for determining patterns of cause and effect. This type of experiment is used in a wide variety of fields, including medical, psychological, and sociological research. Below, we’ll define what controlled experiments are and provide some examples.

Key Takeaways: Controlled Experiments

• A controlled experiment is a research study in which participants are randomly assigned to experimental and control groups.
• A controlled experiment allows researchers to determine cause and effect between variables.
• One drawback of controlled experiments is that they lack external validity (which means their results may not generalize to real-world settings).

Experimental and Control Groups

To conduct a controlled experiment , two groups are needed: an experimental group and a control group . The experimental group is a group of individuals that are exposed to the factor being examined. The control group, on the other hand, is not exposed to the factor. It is imperative that all other external influences are held constant . That is, every other factor or influence in the situation needs to remain exactly the same between the experimental group and the control group. The only thing that is different between the two groups is the factor being researched.

For example, if you were studying the effects of taking naps on test performance, you could assign participants to two groups: participants in one group would be asked to take a nap before their test, and those in the other group would be asked to stay awake. You would want to ensure that everything else about the groups (the demeanor of the study staff, the environment of the testing room, etc.) would be equivalent for each group. Researchers can also develop more complex study designs with more than two groups. For example, they might compare test performance among participants who had a 2-hour nap, participants who had a 20-minute nap, and participants who didn’t nap.

Assigning Participants to Groups

In controlled experiments, researchers use  random assignment (i.e. participants are randomly assigned to be in the experimental group or the control group) in order to minimize potential confounding variables in the study. For example, imagine a study of a new drug in which all of the female participants were assigned to the experimental group and all of the male participants were assigned to the control group. In this case, the researchers couldn’t be sure if the study results were due to the drug being effective or due to gender—in this case, gender would be a confounding variable.

Random assignment is done in order to ensure that participants are not assigned to experimental groups in a way that could bias the study results. A study that compares two groups but does not randomly assign participants to the groups is referred to as quasi-experimental, rather than a true experiment.

Blind and Double-Blind Studies

In a blind experiment, participants don’t know whether they are in the experimental or control group. For example, in a study of a new experimental drug, participants in the control group may be given a pill (known as a placebo ) that has no active ingredients but looks just like the experimental drug. In a double-blind study , neither the participants nor the experimenter knows which group the participant is in (instead, someone else on the research staff is responsible for keeping track of group assignments). Double-blind studies prevent the researcher from inadvertently introducing sources of bias into the data collected.

Example of a Controlled Experiment

If you were interested in studying whether or not violent television programming causes aggressive behavior in children, you could conduct a controlled experiment to investigate. In such a study, the dependent variable would be the children’s behavior, while the independent variable would be exposure to violent programming. To conduct the experiment, you would expose an experimental group of children to a movie containing a lot of violence, such as martial arts or gun fighting. The control group, on the other hand, would watch a movie that contained no violence.

To test the aggressiveness of the children, you would take two measurements : one pre-test measurement made before the movies are shown, and one post-test measurement made after the movies are watched. Pre-test and post-test measurements should be taken of both the control group and the experimental group. You would then use statistical techniques to determine whether the experimental group showed a significantly greater increase in aggression, compared to participants in the control group.

Studies of this sort have been done many times and they usually find that children who watch a violent movie are more aggressive afterward than those who watch a movie containing no violence.

Strengths and Weaknesses

Controlled experiments have both strengths and weaknesses. Among the strengths is the fact that results can establish causation. That is, they can determine cause and effect between variables. In the above example, one could conclude that being exposed to representations of violence causes an increase in aggressive behavior. This kind of experiment can also zero-in on a single independent variable, since all other factors in the experiment are held constant.

On the downside, controlled experiments can be artificial. That is, they are done, for the most part, in a manufactured laboratory setting and therefore tend to eliminate many real-life effects. As a result, analysis of a controlled experiment must include judgments about how much the artificial setting has affected the results. Results from the example given might be different if, say, the children studied had a conversation about the violence they watched with a respected adult authority figure, like a parent or teacher, before their behavior was measured. Because of this, controlled experiments can sometimes have lower external validity (that is, their results might not generalize to real-world settings).

Updated  by Nicki Lisa Cole, Ph.D.

• An Overview of Qualitative Research Methods
• Using Ethnomethodology to Understand Social Order
• Pros and Cons of Secondary Data Analysis
• Immersion Definition: Cultural, Language, and Virtual
• Sociology Explains Why Some People Cheat on Their Spouses
• What Is Participant Observation Research?
• The Differences Between Indexes and Scales
• Definition and Overview of Grounded Theory
• Deductive Versus Inductive Reasoning
• The Study of Cultural Artifacts via Content Analysis
• Units of Analysis as Related to Sociology
• Data Sources For Sociological Research
• Full-Text Sociology Journals Online
• How Race and Gender Biases Impact Students in Higher Ed
• The Racial Wealth Gap
• A Review of Software Tools for Quantitative Data Analysis

Erik ten Hag could repeat his failed tactical experiment in Manchester United vs Brighton

Man utd play brighton in the premier league on saturday and here are five things to look out for in the game..

• 05:30, 24 AUG 2024

Sign up for our daily newsletter to get the day's biggest stories sent direct to your inbox

We have more newsletters

Manchester United will make another trip to the Amex Stadium to face Brighton this weekend.

United began the campaign with a 1-0 win over Fulham thanks to Joshua Zirkzee, who produced the matchwinner in the 87th minute with an intelligent finish at the Stretford End.

That goal from United's first signing of this summer claimed the three points and Erik ten Hag has prepared his players to claim back-to-back victories at Carrington this week.

United visited Brighton from home on the final day of last season, winning 2-0 thanks to goals from Diogo Dalot and Rasmus Hojlund, although the latter is still sidelined due to a hamstring injury he sustained in pre-season, which means he will be absent from the squad again.

ALSO READ: Ten Hag might cause big shock with decision on United starting XI

ALSO READ: United player has accidentally found new strongest position

Here are five things to look out for in the game...

Sky has slashed the price of its Sky Sports, Sky Stream, Sky TV and Netflix bundle in an unbeatable new deal that saves £216 and includes 1,400 live matches across the Premier League, EFL and more.

With Ultra HD included at no extra cost, football fans can enjoy the 2024/25 season with crystal clear picture quality.

Fernandes as the false nine?

Bruno Fernandes started the new Premier League season just as he finished the last - playing as a false nine. Fernandes played in that role on the final day of the 2023/24 campaign against Brighton but that experiment failed and he was unable to have his usual influence.

United improved when Hojlund was introduced to the game in the second half and scored twice, with Hojlund helping set up the first and finding the back of the net to make it 2-0.

Fast forward to this month, Fernandes missed two chances against Fulham and would have surely converted those on another day, but Zirkzee has momentum going into the weekend.

He should start down the middle and Fernandes should be relocated to his natural position in attacking midfield, which would see Mason Mount axed from the starting side.

Garnacho or Amad?

After a superb pre-season, Amad started on the opening day against Fulham and whether he did enough in that game to retain his role against Brighton is questionable.

Although Amad looked bright when on the ball, he wasn't in the game enough and Alejandro Garnacho provided the assist for Zirkzee's goal after replacing him on the hour mark.

Garnacho also scored in the Community Shield - he took that goal brilliantly - and it feels inevitable he'll return to the starting team. The youngster has the ability to take his game to another level this term and he must eventually provide more goals and assists at crucial moments.

United used Garnacho's pace to play over Brighton's highline in May and it wouldn't be a surprise to see him play another key role in the tactical plan to exploit the opposition.

Brighton's new manager

Brighton are one of the best-run football clubs in the world. Their data-led recruitment allows them to sign quality players for minimal fees and flip them in multi-million transfers just a few years later and that recipe for success saw them embark into European competition last term.

Roberto de Zerbi led Brighton into the Europa League, but he departed at the end of last season to join Marseille and he's been replaced by Fabian Hurzeler, who is just 31 years old.

Hurzeler was aged six when United won the treble in 1999 and Casemiro, Christian Eriksen and Tom Heaton are older than him. The German is a rising star in the coaching sphere and he warned Brighton would have to 'suffer' at times against United on Saturday afternoon.

"I games like Manchester United there will be moments where we have to suffer together," he said in his press conference. "There will be moments where maybe United control the game.

"And then you have to stand together, then you have to suffer together. I would love if the fans are still behind us and supporting us. That’s our job, to build this connection with the fans, and it only works if we give a lot of input and a lot of energy on the pitch, and a lot of intensity.”

You'll not be alone in watching Saturday's game and feeling old watching Hurzeler on the sideline.

De Ligt or Maguire?

Matthijs De Ligt has been signed to start and the expectation is he will partner Lisandro Martinez, but Harry Maguire started on the opening day and won't give up his place without a fight.

Maguire enjoyed a renaissance last term and clawed his way back into the starting side, despite losing the captaincy, and will make more starts in 2024/25 than most expect him to.

The former club captain performed well against Fulham and deserves to retain his starting place this weekend, which means the wait for De Ligt's full deal should continue.

Removing Maguire from the team on the back of a faultless performance would send the wrong message in the dressing room and De Ligt can contribute off the bench again.

Has anyone seen Sancho?

Jadon Sancho was a notable absentee when United faced Fulham and Ten Hag, speaking to journalists after the win, confirmed that was partly due to an ear infection and partly tactical.

Ten Hag clarified that Sancho was fit enough to be included in the 20-man quad but he opted to name Garnacho, Zirkzee and Antony as the attacking substitutes instead.

The 24-year-old has been pictured in training ahead of the Brighton game but he could be left out again, which shouldn't be a surprise given his situation with the United boss last season.

Ideally, Sancho would be sold in this summer transfer window, however, there are six days remaining for business and there doesn't seem to be a market for him.

• Manchester United FC
• Premier League
• Erik ten Hag
• Most Recent

Advertisement

How the giants could hypothetically get out of daniel jones' contract before the season, share this article.

The New York Giants might have a big problem on their hands with quarterback Daniel Jones.

Jones’ miserable preseason performance against the Houston Texans on Saturday bewildered even Giants head coach Brian Daboll , begging the question if New York can really go into the season with Jones on the roster.

While the team has absolutely no way of cutting Jones before the seasons starts because of how his contract works, there is hypothetically a way for the team to move on from Jones before the season begins.

Over the Cap shows that a post-June 1 trade would save the Giants more than $36 million on the cap and only cost a dead cap hit of a little more than $11 million for the 2024 season.

If you’re wondering how any team in the NFL could justify trading for Jones with his monstrous contract, we imagine a new franchise would negotiate a substantially lower deal with the Giants quarterback at the point of a deal.

Jones’ team would have to be willing to renegotiate the contract as it is, as he might just be content being possibly benched in New York and earning the gobs and gobs of money he’s set to make for the season .

Jones would most assuredly be a high-end backup for 2024 if an NFL team traded for him, which is very possible if the Giants are through with him.

New York hasn’t given any public indication of Jones being on the outs, but Saturday’s disaster in Houston does make you wonder what’s coming.

The Cowboys can still win the NFC East even if their offseason stunk

Brittany mahomes slams 'haters' on instagram after apparently liking a donald trump post, 2024 nfl passing props: jalen hurts will ball out in kellen moore's offense.

The Chiefs are a fast-moving glacier and the rest of the NFL is being ground to dust

Meet Carson Steele, the NFL undrafted fullback who might be the next Chiefs breakout star

10 2024 NFL breakout candidates from the 2023 draft class, including Bryce Young

Most popular, watch: black bear approaches girl, grabs her leg in ‘scary moment’, taylor swift fantasy football team names: the 8 best we found for 2024, every ea nhl cover star since 1991, sue bird revealed 3 wnba teams she wouldn't want to see in the playoffs, including caitlin clark and the indiana fever, all 30 nfl stadiums, ranked: 2024 edition, watch: awesome power on display during yellowstone bison rut.

Please enter an email address.

Thanks for signing up.

Please check your email for a confirmation.

Something went wrong.

The dataset and materials of "How exposure to natural scenes can promote weight control behaviors: A replication experiment"

Description.

We performed a behavioral experiment to replicate published findings showing that exposure to natural scenes, i.e., viewing pictures of natural versus urban scenes, is associated with the choice of a “reward drink” containing less sugar (i.e., a healthier dietary choice). In total, 140 participants were randomly assigned to one of two study conditions (viewing natural or urban scenes). Participants completed a task measuring temporal discounting. Two measures related to weight control were used: the amount of ice cream consumed in a taste test (actual food consumption) and the amount of sugar chosen for the reward drink. Compared to the urban group, the natural scene group chose reward drinks with less sugar and ate less ice cream in the taste test. The discounting rate fully mediated the impact of exposure to natural versus urban scenes on the two measures. The association between experimental exposure to natural scenes and weight control behaviors was not contingent on the intention to lose weight or participant sex. This replication experiment suggests that exposure to natural scenes helps individuals to control sugar intake and food consumption.

• Site Search:
• Site Search
•  Help/Tutorials
•  Settings
•  Messages

Job Posting: Associate Tax Auditor

Employment Development Department

$6,452.00 - $8,485.00 per Month

Final Filing Date: 9/4/2024

Job Description and Duties

THIS POSITION MAY BE ELIGIBLE FOR A HYBRID WORK SCHEDULE. THE AMOUNT OF TELEWORK IS AT THE DISCRETION OF THE DEPARTMENT AND IS SUBJECT TO CHANGE AS BUSINESS NEEDS ARISE. If you like challenging position as an Associate Tax Auditor (ATA) with diverse duties performing a variety of pogrammtic, operational, and administrative activities as part of a hardworking team with great management and staff?

If you strive to address sensitive issues in a professional and expedient manner and are familiar with field audits, compliance, policies, procedures, project management practices, and the management of program data, you could be our ideal candidate!  

The Employment Development Department (EDD), Field Audit and Compliance Division (FACD), has an exciting opportunity within the Central Operations, Training & Outreach Group for one (1) ATA to join our amazing team!

This is a fantastic opportunity to expand your experience or take the next step in your career!

Under the direction of a Tax Administrator I, the ATA independently performs staff work and conducts more sensitive, complex audits and investigations including screening of Tax Enforcement Group and Questionable Employment Tax Practices to identify potential non-compliance issues, assign case priority and complete cases in the Accounting and Compliance Enterprise System. The ATA also completes 311 Investigations or creates a lead for referral to an Area Audit Office.

The ATA conducts technical program training for the Division and its programs. Coordinates Branch training as the Division Training Single Point of Contact. Assists in the development of the more complex training modules, policies, procedures, and in the development of all training regarding Introductory Professional Education, Continuing Professional Education, e-Learning Café, and other training related material.

Consults with program areas in the development and delivery of training, statewide scheduling of training sessions, organizing facility locations and preparation of materials for training sessions.

Please see the ATA duty statement for full details of this position.

The positions are headquartered in Sacramento, CA and may be eligible for telework under EDD's telework policy. California Government Code Section 14200 requires employees to reside in California to telecommute. Employees are required to report to their headquarters office, as needed. Travel expenses to and from the assigned headquarters are the responsibility of the employee.

 HOW TO APPLY:

STEP 1: Create or login to your Account on https://www.calcareers.ca.gov/ STEP 2: Complete Application Package (including Examination/Employment Application (STD 678) and applicable or                required documents) STEP 3: Electronically Submit Application Package on CalCareers

 Among other eligibility pathways for this classification, the office will also consider a Training & Development (T&D)!

Interested in other career opportunities with EDD? Please visit https://edd.ca.gov/en/about_edd/career_opportunities/

This positiion is located at 722 Capitol Mall, Room 1077, Sacramento CA 95814

Downtown Sacramento, near light rail and multiple bus routes. Close to the Golden 1 Center (DOCO) plaza and the State Capital building!

You will find additional information about the job in the Duty Statement .

Working Conditions

Visa Sponsorship This position is not eligible for visa sponsorship. Applicants must be authorized to work in the US without the need for visa sponsorship by the start date of employment. Travel may be required in this position. This may include work out of the office and/or in an outstation setting which requires a higher level of independence and self-motivation.

Minimum Requirements

• ASSOCIATE TAX AUDITOR , EMPLOYMENT DEVELOPMENT DEPARTMENT

Additional Documents

• Job Application Package Checklist
• Duty Statement

Position Details

Department information, special requirements.

• Clearly indicate the Job Code #, Position Number and the Classification Title of this position in the “Examination or Job Title(s) For Which You Are Applying” section located on Page 3 of your State Examination/Employment STD Form 678.
• Clearly indicate the basis of your eligibility (list, transfer, reinstatement, etc.) in the “Explanations” section located on Page 3 of your State Examination/Employment Application STD Form 678.
• Remove and do not submit the “Equal Employment Opportunity” questionnaire (Page 10) with your completed State Examination/Employment Application STD Form 678. This page is for examination use only.
• Do not include your full Social Security Number on your documents and/or do not provide any LEAP information.

Application Instructions

Completed applications and all required documents must be received or postmarked by the Final Filing Date in order to be considered. Dates printed on Mobile Bar Codes, such as the Quick Response (QR) Codes available at the USPS, are not considered Postmark dates for the purpose of determining timely filing of an application.

Who May Apply

How To Apply

Address for Mailing Application Packages

You may submit your application and any applicable or required documents to:

Address for Drop-Off Application Packages

You may drop off your application and any applicable or required documents at:

Required Application Package Documents

The following items are required to be submitted with your application. Applicants who do not submit the required items timely may not be considered for this job:

• Current version of the State Examination/Employment Application STD Form 678 (when not applying electronically), or the Electronic State Employment Application through your Applicant Account at www.CalCareers.ca.gov. All Experience and Education relating to the Minimum Qualifications listed on the Classification Specification should be included to demonstrate how you meet the Minimum Qualifications for the position.
• Resume is optional. It may be included, but is not required.
• School Transcripts
• Other - A Cover Letter is required and must be included.
• Statement of Qualifications - A Statement of Qualifications (SOQ) is Required. Please see “Statement of Qualifications Requirements” section for more information about the SOQ.

Desirable Qualifications

Contact information.

The Human Resources Contact is available to answer questions regarding the application process. The Hiring Unit Contact is available to answer questions regarding the position.

Please direct requests for Reasonable Accommodations to the interview scheduler at the time the interview is being scheduled. You may direct any additional questions regarding Reasonable Accommodations or Equal Employment Opportunity for this position(s) to the Department's EEO Office.

Statement of Qualifications Requirements

• Describe the training and work experience that has prepared you to perform the day-to-day responsibilities of this position. Provide specific examples of your experience in leading/managing these types of activities, the level of complexity and sensitivity involved, and practices that you have used and would continue to employ to be successful.
• Describe your experience and ability to communicate effectively, including developing and delivering clear and persuasive written materials and oral presentations. Specify the type of presentation or written document submitted and your specific involvement in preparing and presenting the information.
• Describe your experience and ability to create and review technical material which includes current policies, new policies, procedures or legislative changes.

Background Investigation Requirment

ADDITIONAL DEPARTMENT INFORMATION

The Employment Development Department may require a new probation in accordance with applicable probationary period rules.

Click on the link to complete the Employment Development Department Recruitment Survey:  EDD Recruitment Survey

Merit System Principles Information regarding Merit System Principles provided to public employees by the State Civil Service Act can be found on the CalHR website at  https://www.calhr.ca.gov/Training/Pages/performance-management-merit-system-principles.aspx

Equal Opportunity Employer

The State of California is an equal opportunity employer to all, regardless of age, ancestry, color, disability (mental and physical), exercising the right to family care and medical leave, gender, gender expression, gender identity, genetic information, marital status, medical condition, military or veteran status, national origin, political affiliation, race, religious creed, sex (includes pregnancy, childbirth, breastfeeding and related medical conditions), and sexual orientation.

It is an objective of the State of California to achieve a drug-free work place. Any applicant for state employment will be expected to behave in accordance with this objective because the use of illegal drugs is inconsistent with the law of the State, the rules governing Civil Service, and the special trust placed in public servants.

Automatic log out in

Select 'Stay Logged In' below to resume your activity.

You must enable Javascript to use this site.